Allow cloud-hypervisor to direct boot the bzImage kernel format using
the regular 32 bit entry point. This can share the memory and vcpu
setup with the regular PVH boot code, but requires the setup of the
'zero page'.
Signed-off-by: Stefan Nuernberger <stefan.nuernberger@cyberus-technology.de>
In case of SEV-SNP guest devices use sw-iotlb to gain access guest
memory for DMA. For that F_IOMMU/F_ACCESS_PLATFORM must be exposed in
the feature set of virtio devices.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
The 'generate_ram_ranges' function currently hardcodes the assumption
that there are only 2 E820 RAM entries. This is not flexible enough to
handle vendor specific memory holes. Returning a Vec is also more
convenient for users of this function.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Since the ACPI tables are generated inside the IGVM file in case of
SEV-SNP guest. So, we don't need to generate it inside the cloud
hypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
We occasionally saw cloud-hypervisor crashed due to seccomp violations. The
coredumps showed the HTTP API thread crashing after it attempted to call
sched_yield(). The call came from rust stdlib's mpmc module, which calls
sched_yield() if several attempts to busy-wait for a condition to fulfil fall
short.
Since the system call is harmless and it comes from the stdlib, I opted to allow
all threads to call it.
Signed-off-by: Peteris Rudzusiks <rye@stripe.com>
Currently the only way to set the affinity for virtio block threads is
to boot the VM, search for the tid of each of the virtio block threads,
then set the affinity manually. This commit adds an option to pin virtio
block queues to specific host cpus (similar to pinning vcpus to host
cpus). A queue_affinity option has been added to the disk flag in
the cli to specify a mapping of queue indices to host cpus.
Signed-off-by: acarp <acarp@crusoeenergy.com>
Traditional way to configure vcpu don't work for sev-snp guests. All the
vCPU configuration for SEV-SNP guest is provided via VMSA.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
On guests with large amounts of memory, using the `prefault` option can
lead to a very long boot time. This commit implements the strategy
taken by QEMU to prefault memory in parallel using multiple threads,
decreasing the time to allocate memory for large guests by
an order of magnitude or more.
For example, this commit reduces the time to allocate memory for a
guest configured with 704 GiB of memory on 1 NUMA node using 1 GiB
hugepages from 81.44134669s to just 6.865287881s.
Signed-off-by: Sean Banko <sbanko@crusoeenergy.com>
Beta clippy fix:
warning: initializer for `thread_local` value can be made `const`
--> vmm/src/sigwinch_listener.rs:27:40
|
27 | static TX: RefCell<Option<File>> = RefCell::new(None);
| ^^^^^^^^^^^^^^^^^^ help: replace with: `const { RefCell::new(None) }`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#thread_local_initializer_can_be_made_const
= note: `#[warn(clippy::thread_local_initializer_can_be_made_const)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Beta clippy fix:
warning: this call to `as_ref.map(...)` does nothing
--> vmm/src/device_manager.rs🔢9
|
1234 | self.console_resize_pipe.as_ref().map(Arc::clone)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.console_resize_pipe.clone()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_asref
= note: `#[warn(clippy::useless_asref)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
When we import a page, we have a page with
some data or empty, empty does not mean there is no data,
it rather means it's full of zeros. We can skip writing the
data as guest memory of the page is already zeroed.
A page could be partially filled and the rest of the content is zero.
Our IGVM generation tool only fills data here if there is some data
without zeros. Rest of them are padded. We only write data
without padding and compare whether we complete writing
the buffer content. Still it's a full page and update the variable
with length of the full page.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This commit adds the debug-console (or debugcon) device to CHV. It is a
very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is
meant for printing information as easy as possible, without any
necessary configuration from the guest at all.
It is primarily interesting to OS/kernel and firmware developers as they
can produce output as soon as the guest starts without any configuration
of a serial device or similar. Furthermore, a kernel hacker might use
this device for information of type B whereas information of type A are
printed to the serial device.
This device is not used by default by Linux, Windows, or any other
"real" OS, but only by toy kernels and during firmware development.
In the CLI, it can be configured similar to --console or --serial with
the --debug-console parameter.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
Set the SEV control register so we know where to
start running. This register configures the
SEV feature control state on a virtual processor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
These Default implementations either don't produce valid configs, are
no longer used outside of tests, or both.
For the tests, we can define our own local "default" values that make
the most sense for the tests, without worrying about what's
a (somewhat) sensible "global" default value.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Bumping anyhow crate from 1.0.75 to 1.0.79 will cause seccomp
failures through integration tests. Newly added backtrace support
relies on readlink and many other syscalls.
Issue noticed with test_api_http_pause_resume test, where second time
of VM PAUSE or VM RESUME prints error and causes panic.
Noticed that panic message in a thread which is not allowed to write
output triggered the issue.
So implementing Display trait for HttpError and ApiError enums to avoid
adding many syscalls to seccomp filter section.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
On hosts with >256 cpus, setting the cpu affinity to a host cpu index
>255 will return an error because type of `host_cpu` is `u8`.
This commit changes the type of `host_cpu` to `usize` to remove this
limitation.
Signed-off-by: Sean Banko <sbanko@crusoeenergy.com>
Uses of the old ApiRequest enum conflated two different concerns:
identifying an API request endpoint, and storing data for an API
request. This led to ApiRequest values being passed around with junk
data just to communicate a request type, which forced all API request
body types to implement Default, which in some cases doesn't make any
sense — what's the "default" path for a vhost-user socket? The
nonsensical Default values have led to tests relying on being able to
use nonsensical data, which is an impediment to adding better
validation for these types.
Rather than having API request types be represented by an enum, which
has to carry associated body data everywhere it's used, it makes more
sense to represent API request types as trait objects. These can have
an associated type for the type of the request body, and this makes it
possible to pass API request types and data around as siblings in a
type-safe way without forcing them into a single value even where it
doesn't make sense. Trait objects also give us dynamic dispatch,
which lets us get rid of several large match blocks.
To keep it possible to fuzz the HTTP API, all the Vmm methods called
by the HTTP API are pulled out into a trait, so the fuzzer can provide
its own stub implementation of the VMM.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
The VIRTIO specification[1] says:
> The upper 32 bits of the CID are reserved and zeroed.
We should therefore not allow the user to supply a VSOCK CID with
those bits set. To accomplish this, limit the public API of the
virtio-vsock device to only accept 32-bit CIDs, while still using
64-bit CIDs internally since that's how virtio-vsock works.
[1]: https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-4400004
Signed-off-by: Alyssa Ross <hi@alyssa.is>
I accidentally ran a VM with CID 2 (VMADDR_CID_HOST), and very strange
and difficult to debug behavior ensued. I don't think a virtio-vsock
device should be allowed to have any of the special CIDs
(VMADDR_CID_ANY, VMADDR_CID_HYPERVISOR, VMADDR_CID_LOCAL, VMADDR_CID_HOST).
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Complete the isolated import, telling the
Microsoft hypervisor that import is done so that
MSHV can issue SNP_LAUNCH_FINISH command.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Import all the isolated pages after parsing is
done on the iGVM file. Hypervisor adds those
pages for PSP measurement(part of the hashing).
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add a 'rate_limit_groups' field to VmConfig that defines a set of
named RateLimiterGroups.
When the 'rate_limit_group' field of DiskConfig is defined, all
virtio-blk queues will be rate-limited by a shared RateLimiterGroup.
The lifecycle of all RateLimiterGroups is tied to the Vm.
A RateLimiterGroup may exist even if no Disks are configured to use
the RateLimiterGroup. Disks may be hot-added or hot-removed from the
RateLimiterGroup.
When the 'rate_limiter' field of DiskConfig is defined, we construct
an anonymous RateLimiterGroup whose lifecycle is tied to the Disk.
This is primarily done for api backwards compatability. Importantly,
the behavior is not the same! This implementation rate_limits the
aggregate bandwidth / iops of an individual disk rather than the
bandwidth / iops of an individual queue of a disk.
When neither the 'rate_limit_group' or the 'rate_limiter' fields of
DiskConfig is defined, the Disk is not rate-limited.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
This PR addresses a bug in which the cpu topology of a guest
with non power-of-two number of cores is incorrect. For example,
in some contexts, a virtual machine with 2-sockets and 12-cores
will incorrectly believe that 16 cores are on socket 1 and 8
cores are on socket 2. In other cases, common topology enumeration
software such as hwloc will crash.
The root of the problem was the way that cloud-hypervisor generates
apic_id. On x86_64, the (x2) apic_id embeds information about cpu
topology. The cpuid instruction is primarily used to discover the
number of sockets, dies, cores, threads, etc. Using this information,
the (x2) apic_id is masked to determine which {core, die, socket} the
cpu is on. When the cpu topology is not a power of two
(e.g. a 12-core machine), this requires non-contiguous (x2) apic_id.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
For SEV-SNP guests we need to provide the extended memory. It follows a
very simple layout and very similar to other x86 guests.
First segment: [HIGH_RAM_START - MEM_32BIT_RESERVED_START]
PCI hole: [MEM_32BIT_RESERVED_START - RAM_64BIT_START]
Second segment: [RAM_64BIT_START - RAM_END]
Fixes#5993
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
There is no requirement to call copy_from_slice, since all the member
variables are identical and we can directly assign them value.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
vmm: Add igvm module and loader module
Add a separate module named igvm to the vmm crate
with definitions to parse and load igvm to the guest memory.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This patch adds igvm to the Vm config and params as well as
the command line argument to pass igvm file to load into
guest memory. The file must maintain the IGVM format.
The CLI option is featured guarded by igvm feature gate.
The IGVM(Independent Guest Virtual Machine) file format
is designed to encapsulate all information required to
launch a virtual machine on any given virtualization stack,
with support for different isolation technologies such as
AMD SEV-SNP and Intel TDX.
At a conceptual level, this file format is a set of commands created
by the tool that generated the file, used by the loader to construct
the initial guest state. The file format also contains measurement
information that the underlying platform will use to confirm that
the file was loaded correctly and signed by the appropriate authorities.
The IGVM file is generated by the tool:
https://github.com/microsoft/igvm-tooling
The IGVM file is parsed by the following crates:
https://github.com/microsoft/igvm
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This commit changes existing behavior of named TAP interfaces.
When booting a VM with configuration for a named TAP interface,
cloud-hypervisor will create the interface and apply a given
IP configuration to that interface. If the named interface
already exists on the system, the configuration is NOT overwritten.
Setting the ip and netmask fields in a tap interface configuration
for a named tap interface now works by handing this configuration
to the virtio_devices::Net object when it is created with a name.
This commit also touches net_util to make sure that the ip configuration
of existing TAP interfaces is not modified with ip or netmask handed to
open_tap.
Signed-off-by: Markus Sütter <markus.suetter@secunet.com>
We found that it's slow to load JSON when reading snap files. As
described in [1], using from_slice instead of from_reader can fix
this.
Also, fix the error type being returned.
1. https://github.com/serde-rs/json/issues/160
Signed-off-by: Yi Wang <foxywang@tencent.com>
Cloud Hypovrisor supports legacy serial device and virito console device
for VMs. Using legacy serial device, CH can capture full VM console logs,
but its implementation is based on KVM PIO emulation and has poor
performance. Using the virtio console device, the VM console logs will
be sent to CH through the virtio ring, the performance is better, but CH
will only capture the VM console logs after the virtio console device is
initialized, the VM early startup logs will be discarded.
This patch provides a way to enable both the legacy serial device and the
virtio console device as a TTY mode by setting the leagcy serial port as
the VM's early printk device and setting the virtio console as the VM's
main console device.
Then CH can capture early boot logs from the legacy serial device and
capture later logs from the virito console device with better performance.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The seccompiler v0.4.0 started to use `seccomp` syscall instead of the
`prctl` syscall. Also, threads for virtio-deivces should not need any of
these syscalls anyway.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch fixes following warnings:
error: boolean to int conversion using if
--> vmm/src/vm.rs:866:42
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| __________________________________________^
| | 1 // SEV_SNP_ENABLED
| | } else {
| | 0 // SEV_SNP_DISABLED
| | })
| |_____________________^ help: replace with from: `u64::from(sev_snp_enabled.into())`
|
= note: `-D clippy::bool-to-int-with-if` implied by `-D warnings`
= note: `sev_snp_enabled.into() as u64` or `sev_snp_enabled.into().into()` can also be valid options
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bool_to_int_with_if
error: useless conversion to the same type: `bool`
--> vmm/src/vm.rs:866:45
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| ^^^^^^^^^^^^^^^^^^^^^^ help: consider removing `.into()`: `sev_snp_enabled`
|
= note: `-D clippy::useless-conversion` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
error: could not compile `vmm` due to 2 previous errors
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Partially revert 111225a2a5
and add the new dbus and pvpanic arguments.
As we are switching back to clap observe the following changes.
A few examples:
1. `-v -v -v` needs to be written as`-vvv`
2. `--disk D1 --disk D2` and others need to be written as `--disk D1 D2`.
3. `--option value` needs to be written as `--option=value.`
Change integration tests to adapt to the breaking changes.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
This struct contains all configuration fields that controls the way how
we generate CPUID for the guest on x86_64. This allows cleaner extension
when adding new configuration fields.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The lock to `vm_config` is held for accessing `cpus.kvm_hyperv` passing
as a reference to `arch::generate_common_cpuid()`, so acquiring the same
lock again while calling to the same function is a deadlock.
Fixes: 3793ffe888
Reported-by: Yi Wang <foxywang@tencent.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
As part of this initialization for a SEV-SNP VM on MSHV, it is required
that we transition the guest state to secure state using partition
hypercall. This implies all the created VPs will transition to secure
state and could access the guest encrypted memory.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
