It returns an hypervisor object depending on which hypervisor is
configured. Currently it only supports KVM.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
SGX expects the EPC region to be reported as "reserved" from the e820
table. This patch adds a new entry to the table if SGX is enabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The support for SGX is exposed to the guest through CPUID 0x12. KVM
passes static subleaves 0 and 1 from the host to the guest, without
needing any modification from the VMM itself.
But SGX also relies on dynamic subleaves 2 through N, used for
describing each EPC section. This is not handled by KVM, which means
the VMM is in charge of setting each subleaf starting from index 2
up to index N, depending on the number of EPC sections.
These subleaves 2 through N are not listed as part of the supported
CPUID entries from KVM. But it's important to set them as long as index
0 and 1 are present and indicate that SGX is supported.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of passing the GuestMemoryMmap directly to the CpuManager upon
its creation, it's better to pass a reference to the MemoryManager. This
way we will be able to know if SGX EPC region along with one or multiple
sections are present.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The SGX EPC region must be exposed through the ACPI tables so that the
guest can detect its presence. The guest only get the full range from
ACPI, as the specific EPC sections are directly described through the
CPUID of each vCPU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the presence of one or multiple SGX EPC sections from the VM
configuration, the MemoryManager will allocate a contiguous block of
guest address space to hold the entire EPC region. Within this EPC
region, each EPC section is memory mapped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introducing the new CLI option --sgx-epc along with the OpenAPI
structure SgxEpcConfig, so that a user can now enable one or multiple
SGX Enclave Page Cache sections within a contiguous region from the
guest address space.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extract the code that is used by vhost_user_block from the
virtio-devices crate to remove the dependencies on unrequired
functionality such as the virtio transports.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit adds required environment configurations to the
`dev_cli.sh` and a Jenkins stage to enable AArch64 binary
building using musl toolchain.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
As the current AArch64 integration test builds kernel every time,
which would take unnecessary time in CI and therefore not ideal.
This commit refactors the AArch64 kernel building strategy to:
1. Keep the Linux kernel source code directory instead of deleting
it everytime after the kernel is built.
2. In integration test script, check if the Linux kernel source
code directory exists. If so use `git fetch && git checkout -f` to
keep the source code always updated, else run `git clone` to get
the source code.
3. Copy config file in and then compile the kernel.
Fixes: https://github.com/cloud-hypervisor/cloud-hypervisor/issues/1444
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This simplies some of the handling for PCI BARs particularly with
respect to snapshot and restore. No attempt has been made to handle the
64-bit bar handling in a different manner to that which was used before.
Fixes: #1153
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In this commit we saved the BDF of a PCI device and set it to "devid"
in GSI routing entry, because this field is mandatory for GICv3-ITS.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The type is now hypervisor::Vm. Switch from KVM specific name vm_fd to a
generic name just like 8186a8eee6 ("vmm: interrupt: Rename vm_fd").
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Under high load, the VM might take some time to hotplug the disk after
the hotplug command has been issued. For this reason, let's put a 10s
sleep before checking for the presence of the new disk.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We want to give the time to the nested VM to be fully ready before we
check it's correctly setup. This involves 3 layers of virtualization
when running the CI on Azure, which added to the high load happening
because of the parallelization, adds up to the start up time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio configuration structures have been slightly modified between
5.6-rc4 and 5.8-rc4, forcing the virtio-iommu device to be updated
accordingly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Updating the kernel from 5.6-rc4 to 5.8-rc4 allows us to remove the
dependency on both virtio-vsock and virtio-mem patches as they are now
part of the upstream kernel. We're still carrying virtio-iommu and
virtio-fs patches.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the definition of RawFile from virtio-devices crate into qcow
crate. All the code that consumes RawFile also already depends on the
qcow crate for image file type detection so this change breaks the
need for the qcow crate to depend on the very large virtio-devices
crate.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As compiling without acpi (implied by mmio) means that the VM will
terminate on i8042 reset we cannot test the reboot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that vhost_user_net crate does not depend on the virtio-devices
crate it is no longer compiled differently based on the mmio or pci
features.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move NetQueuePair and the related NetCounters into the net_util crate.
This means that the vhost_user_net crate now no longer depends on
virtio-devices and so does not depend on the pci, qcow or other similar
crates. This significantly simplifies the build chain for this backend.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By moving the code for opening the two RX and TX queues into a shared
location we are starting to remove the requirement for the
vhost-user-net backend to depend on the virtio-devices crate which in of
itself depends on many other crates that are not necessary for the
backend to function.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than use an embedded String inside the MultiQueueSupport error
value use two different values to differentiate the two cases.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By moving the code for opening the TAP device into a shared location we
are starting to remove the requirement for the vhost-user-net backend to
depend on the virtio-devices crate which in of itself depends on many
other crates that are not necessary for the backend to function.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It gets bubbled all the way up from hypervsior crate to top-level
Cargo.toml.
Cloud Hypervisor can't function without KVM at this point, so make it
a default feature.
Fix all scripts that use --no-default-features.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
