Commit Graph

491 Commits

Author SHA1 Message Date
Hui Zhu
abbd69abee tests: Add integration test test_virtio_mem
Add integration test test_virtio_mem for virtio-mem.

Signed-off-by: Hui Zhu <teawater@antfin.com>
2020-03-25 15:54:16 +01:00
Rob Bradford
8d05fb86e3 tests: Add integration test for hotplugging pmem device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 13:18:17 +01:00
Rob Bradford
96d4f1e39e tests: Add integration test for hotplugging disk device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 09:35:53 +00:00
Sebastien Boeuf
c1e6d0022b ci: Add memory resizing use case to vhost-user tests
All vhost-user-blk, vhost-user-net and virtio-fs integration tests are
extended with memory resizing. The point is to validate that we can
hotplug some memory and keep these backends to work as expected.

Just a note that because memory resizing is not supported by mmio, we
limit these extensions to all non-mmio use cases.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
890582b5a2 ci: Factorize kernel command line
The same Clear Linux kernel command line was repeated again and again in
the code. That's why this commit takes care of factorizing it, which
simplifies the code but also simplify maintenance whenever we'd need to
update the block UUID.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
4de258477e ci: Fix mmio tests with direct kernel boot
The hypervisor-fw does not support virtio-blk through mmio transport
layer, therefore we can only run tests with mmio if these tests boot
directly to kernel.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
f2682463a4 ci: Factorize integration tests booting from vhost-user-blk
Remove duplicated code for all boot related tests relying on
vhost-user-blk.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
5a5b3cf23b ci: Factorize vhost-user-blk integration tests
All the non-boot related vhost-user-blk tests are factorized to remove
code duplication.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
dd8debf201 ci: Run vhost-user-blk tests for mmio builds
There's no reason mmio builds cannot support vhost-user-blk, therefore
there's no reason to skip these tests for mmio.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
0c9c72c583 ci: Unify vhost-user-blk integration tests
As a first step towards factorizing as many vhost-user-blk tests as
possible, this patch takes care of unifying their expected output.

It also makes a clear separation between the tests booting from
vhost-user-blk from the ones passing an extra volume.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
c95851f48f ci: Run vhost-user-net tests for mmio transport
No reason to skip vhost-user-net integration tests for the mmio
transport build.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
68293fc0e8 ci: Factorize vhost-user-net one step further
In order to limit code duplication, vhost-user-net integration tests are
further factorized, as they now include the self spawning test.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Rob Bradford
bdcfe1efbd tests: Add "discard_writes" pmem test
Factorise test_virtio_pmem to test changes are not persisted if file is
readonly.

As virtio-mem is now supported in the upstream kernel we can switch to
using the firmware.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-20 14:46:34 +01:00
Rob Bradford
70986022d8 tests: Make the test_virtio_pmem test use a temporary file
Rather than using a raw OS disk image. This will be useful when the test
is extended to doing I/O on the image.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-20 14:46:34 +01:00
Rob Bradford
0788600702 build: Remove "pvh_boot" feature flag
This feature is stable and there is no need for this to be behind a
flag. This will also reduce the time needed to run the integration test
as we will not be running them all again under the flag.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-19 13:05:44 +00:00
Alejandro Jimenez
efb2447801 pvh: Add integration test to validate PVH boot
Add an integration test that builds cloud-hypervisor with
the pvh_boot feature and boots a kernel built with CONFIG_PVH.

Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
2020-03-13 18:29:44 +01:00
Rob Bradford
abccf766ce tests: Use ch-remote to add/remove devices in test_vfio
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-12 12:56:10 +01:00
Rob Bradford
5c3ce9dd00 tests: Extend ch-remote helper to support optional single argument
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-12 12:56:10 +01:00
Sebastien Boeuf
34412c9b41 vmm: Add id option to VFIO hotplug
Add a new id option to the VFIO hotplug command so that it matches the
VFIO coldplug semantic.

This is done by refactoring the existing code for VFIO hotplug, where
VmAddDeviceData structure is replaced by DeviceConfig. This structure is
the one used whenever a VFIO device is coldplugged, which is why it
makes sense to reuse it for the hotplug codepath.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-11 19:50:31 +01:00
Rob Bradford
911a2d61d7 tests: Use ch-remote to resize the VM
Remove manually constructed API request in the integration tests.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-11 08:22:09 +01:00
Sebastien Boeuf
f7277140bb ci: Add integration test for VFIO hot-unplug
Extend the existing test_vfio by unplugging the previously hotplugged
device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-10 17:05:06 +00:00
Rob Bradford
16fd506bb8 tests: Use new ch-remote for pause/resume integration test
Replace the use of a manual curl command with the new ch-remote tool.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-09 15:03:01 +00:00
Cathy Zhang
be6f91d0d1 tests: Refactoring vhost_user_net test cases
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
2020-03-05 15:09:20 +00:00
Rob Bradford
42148063ec tests: Remove further use of sudo subshells
Replace sudo invocations of bash creating a subshell with simpler
solutions by running the program directly on the input or using tee.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
2baf5ab80d tests: Simplfy the shm region check
There is no need to spawn a subshell in this case as grep can open the
file directly.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
97affbebfe tests: Re-enable the virtio-fs tests and make them work with virtio-mmio
As part of bringing the tests up with virtio-mmio the virtio-fs were
wrongly disabled. Re-enable them and remove the cache size check as the
cache does not appear in /proc/iomem on virtio-mmio.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
7b1d5c1ad9 tests: Remove entropy check from vhost-user-block test
When booting from vhost-user-block the entropy is sometimes lower
triggering a flaky test. We have already use other, more reliable
methods for checking that the VM has booted.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Sebastien Boeuf
1152b1a147 ci: Add VFIO hotplug integration test
This commit extends the existing test_vfio by hotplugging an extra
virtio-net device to the L2 VM. The test for validating the hotplug
succeeded is the same as the one to verify the non-hotplugged devices.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-04 12:06:02 +00:00
Rob Bradford
22dd49d0b5 tests: Test virtio-fs with virtio-mmio
Now that virtio-mmio transport has support for SHM regions we should be
able to test virtio-fs against it.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 09:40:25 +01:00
Sebastien Boeuf
0223cf8c2b ci: Update ClearLinux image
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
three extra bundles added to it.

First bundle is curl, which adds the curl binary to the image, second
bundle is iperf, adding the iperf binary to the image, and third bundle
is sysadmin-basic to include utility like netcat.

The image is 2G in size.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-04 07:31:15 +00:00
Rob Bradford
5ade9d4610 tests: Remove unnecessary sleeps and kill on clean shutdown tests
On tests that expect a clean shutdown there is no need to try and kill
the child after wait() has returned as the process has already exited.
Further there is no need to sleep before wait() as wait will block until
the VM and VMM shutdown is complete.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
c98949bdd3 tests: Wait for VMM to exit in test_serial_file/test_console_file
This should address any flakiness as the VMM process will have
completely terminated and all files closed.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
2f58fb8307 tests: Test rebooting works for block self spawn test
Being able to reboot the VM is an important aspect of the self spawning
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
e817aa6824 tests: Improve VM shutdown behaviour
Many of the tests attempted to SSH into the VM and then run "shutdown"
but don't actually check that the VM has shutdown correctly and proceed
to kill the child process. Remove the associated SSH commands and sleeps
from those tests that are not explicitly checking the shutdown
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
559b70cf0a tests: Make output capture optional
Only some tests require the output for the tests to be captured so
default to not capturing the output to a pipe and instead make it
controllable.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
dae7608b1e tests: Remove duplicated network configuration
Many of the tests use an identical network configuration. Add a
GuestCommand::default_net() to generate this configuration and use it
wherever possible.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
6466ad2112 tests: Remove duplicated disk configuration
Many of the tests use an identical disk configuration. Add a
GuestCommand::default_disks() to generate this configuration and use it
wherever possible.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
9f1ac24bed tests: Make the GuestCommand take a reference to the guest
This will be used fill out default parts of the guest command.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
49e70c6203 tests: Port integration tests over to GuestCommand
Rather than creating the command itself delegate to the GuestCommand.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
67a5882415 tests: Introduce new GuestCommand to handle launching the guest
This is a thin wrapper over std::process:Command which currently only
specifies the default binary but in future will handle more default
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
d7b0b9842d tests: Move integration tests to their own directory
Simplify main.rs by moving the integration tests to their own directory.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-25 10:42:54 +00:00