By disabling this KVM feature, we prevent the guest from using APF
(Asynchronous Page Fault) mechanism. The kernel has recently switched to
using interrupts to notify about a page being ready, but for some
reasons, this is causing unexpected behavior with Cloud Hypervisor, as
it will make the vcpu thread spin at 100%.
While investigating the issue, it's better to disable the KVM feature to
prevent 100% CPU usage in some cases.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The original code had a generic type E. It was later replaced by a
concrete type. The code should have been simplified when the replacement
happened.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
The MCRS method returns a 64-bit memory range descriptor. The
calculation is supposed to be done as follows:
max = min + len - 1
However, every operand is represented not as a QWORD but as combination
of two DWORDs for high and low part. Till now, the calculation was done
this way, please see also inline comments:
max.lo = min.lo + len.lo //this may overflow, need to carry over to high
max.hi = min.hi + len.hi
max.hi = max.hi - 1 // subtraction needs to happen on the low part
This calculation has been corrected the following way:
max.lo = min.lo + len.lo
max.hi = min.hi + len.hi + (max.lo < min.lo) // check for overflow
max.lo = max.lo - 1 // subtract from low part
The relevant part from the generated ASL for the MCRS method:
```
Method (MCRS, 1, Serialized)
{
Acquire (MLCK, 0xFFFF)
\_SB.MHPC.MSEL = Arg0
Name (MR64, ResourceTemplate ()
{
QWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
0x0000000000000000, // Granularity
0x0000000000000000, // Range Minimum
0xFFFFFFFFFFFFFFFE, // Range Maximum
0x0000000000000000, // Translation Offset
0xFFFFFFFFFFFFFFFF, // Length
,, _Y00, AddressRangeMemory, TypeStatic)
})
CreateQWordField (MR64, \_SB.MHPC.MCRS._Y00._MIN, MINL) // _MIN: Minimum Base Address
CreateDWordField (MR64, 0x12, MINH)
CreateQWordField (MR64, \_SB.MHPC.MCRS._Y00._MAX, MAXL) // _MAX: Maximum Base Address
CreateDWordField (MR64, 0x1A, MAXH)
CreateQWordField (MR64, \_SB.MHPC.MCRS._Y00._LEN, LENL) // _LEN: Length
CreateDWordField (MR64, 0x2A, LENH)
MINL = \_SB.MHPC.MHBL
MINH = \_SB.MHPC.MHBH
LENL = \_SB.MHPC.MHLL
LENH = \_SB.MHPC.MHLH
MAXL = (MINL + LENL) /* \_SB_.MHPC.MCRS.LENL */
MAXH = (MINH + LENH) /* \_SB_.MHPC.MCRS.LENH */
If ((MAXL < MINL))
{
MAXH += One /* \_SB_.MHPC.MCRS.MAXH */
}
MAXL -= One
Release (MLCK)
Return (MR64) /* \_SB_.MHPC.MCRS.MR64 */
}
```
Fixes#1800.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Fixes the current codebase so that every cargo clippy can be run with
the beta toolchain without any error.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There are two parts:
- Unconditionally zero the output area. The length of the incoming
vector has been seen from 1 to 4 bytes, even though just the first
byte might need to be handled. But also, this ensures any possibly
unhandled offset will return zeroed result to the caller. The former
implementation used an I/O port which seems to behave differently from
MMIO and wouldn't require explicit output zeroing.
- An access with zero offset still takes place and needs to be handled.
Fixes#2437.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
The following is from the Hyper-V specification v6.0b.
Cpuid leaf 0x40000003 EDX:
Bit 3: Support for physical CPU dynamic partitioning events is
available.
When Windows determines to be running under a hypervisor, it will
require this cpuid bit to be set to support dynamic CPU operations.
Cpuid leaf 0x40000004 EAX:
Bit 5: Recommend using relaxed timing for this partition. If
used, the VM should disable any watchdog timeouts that
rely on the timely delivery of external interrupts.
This bit has been figured out as required after seeing guest BSOD
when CPU hotplug bit is enabled. Race conditions seem to arise after a
hotplug operation, when a system watchdog has expired.
Closes#1799.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
error: name `GPIOInterruptDisabled` contains a capitalized acronym
Error: --> devices/src/legacy/gpio_pl061.rs:46:5
|
46 | GPIOInterruptDisabled,
| ^^^^^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `GpioInterruptDisabled`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `FinalizeTDX` contains a capitalized acronym
--> vmm/src/vm.rs:274:5
|
274 | FinalizeTDX(hypervisor::HypervisorVmError),
| ^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `FinalizeTdx`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: name `AcpiPMTimerDevice` contains a capitalized acronym
--> devices/src/acpi.rs:175:12
|
175 | pub struct AcpiPMTimerDevice {
| ^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `AcpiPmTimerDevice`
|
= note: `#[warn(clippy::upper_case_acronyms)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: name `IORegion` contains a capitalized acronym
--> pci/src/configuration.rs:320:5
|
320 | IORegion = 0x01,
| ^^^^^^^^ help: consider making the acronym lowercase, except the initial letter (notice the capitalization): `IoRegion`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: name `LocalAPIC` contains a capitalized acronym
--> vmm/src/cpu.rs:197:8
|
197 | struct LocalAPIC {
| ^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `LocalApic`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `TYPE_UNKNOWN` contains a capitalized acronym
--> vm-virtio/src/lib.rs:48:5
|
48 | TYPE_UNKNOWN = 0xFF,
| ^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `Type_Unknown`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `SDT` contains a capitalized acronym
--> acpi_tables/src/sdt.rs:27:12
|
27 | pub struct SDT {
| ^^^ help: consider making the acronym lowercase, except the initial letter: `Sdt`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Drop the generic type E and use IrqRoutngEntry directly. This allows
dropping a bunch of trait bounds from code.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Their make_entry functions look the same now. Extract the logic to a
common function.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
There's no need to have the code creating the passthrough_device being
duplicated since we can factorize it in a function used in both cases
(both cold plugged and hot plugged devices VFIO devices).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend and use the existing DeviceTree to retrieve useful information
related to PCI devices. This removes the duplication with pci_devices
field which was internal to the DeviceManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make the code a bit clearer by changing the naming of the structure
holding the list of IRQs reserved for PCI devices. It is also modified
into an array of 32 entries since we know this is the amount of PCI
slots that is supported.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We define a new enum in order to classify PCI device under virtio or
VFIO. This is a cleaner approach than using the Any trait, and
downcasting it to find the object back.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduces a tuple holding both information needed by pci_id_list and
pci_devices.
Changes pci_devices to be a BTreeMap of this new tuple.
Now that pci_devices holds the information needed from pci_id_list,
pci_id_list is no longer needed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for further factorization, the pci_id_list is now a
hashmap of PCI b/d/f leading to each device name.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of relying on a PCI specific device list, we use the DeviceTree
as a reference to determine if a device name is already in use or not.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Only if we have a valid API server path then create the API server. For
now this has no functional change there is a default API server path in
the clap handling but rather prepares to do so optionally.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit switches the default serial device from 16550 to the
Arm dedicated UART controller PL011. The `ttyAMA0` can be enabled.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
On AArch64, interrupt controller (GIC) is emulated by KVM. VMM need to
set IRQ routing for devices, including legacy ones.
Before this commit, IRQ routing was only set for MSI. Legacy routing
entries of type KVM_IRQ_ROUTING_IRQCHIP were missing. That is way legacy
devices (like serial device ttyS0) does not work.
The setting of X86 IRQ routing entries are not impacted.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
