The Vm structure was used to store a strong reference to the IO bus.
This is not needed anymore since the AddressManager is logically the
one holding this strong reference. This has been made possible by the
introduction of Weak references on the Bus structure itself.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the BusDevice devices are stored as Weak references by the
IO and MMIO buses, there's no need to use Weak references from the
DeviceManager anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the BusDevice devices are stored as Weak references by the
IO and MMIO buses, there's no need to use Weak references from the
CpuManager anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the BusDevice devices are stored as Weak references by the IO
and MMIO buses, there's no need to use Weak references from the PciBus
anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The point is to make sure the DeviceManager holds a strong reference of
each BusDevice inserted on the IO and MMIO buses. This will allow these
buses to hold Weak references onto the BusDevice devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The method add_vfio_device() from the DeviceManager needs to be mutable
if we want later to be able to update some internal fields from the
DeviceManager from this same function.
This commit simply takes care of making the necessary changes to change
this function as mutable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's more logical to name the field referring to the DeviceManager as
"device_manager" instead of "devices".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By inserting the DeviceManager on the IO bus, we introduced some cyclic
dependency:
DeviceManager ---> AddressManager ---> Bus ---> BusDevice
^ |
| |
+---------------------------------------------+
This cycle needs to be broken by inserting a Weak reference instead of
an Arc (considered as a strong reference).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Ensures the configuration is updated after a new device has been
hotplugged. In the event of a reboot, this means the new VM will be
started with the new device that had been previously hotplugged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit finalizes the VFIO PCI hotplug support, based on all the
previous commits preparing for it.
One thing to notice, this does not support vIOMMU yet. This means we can
hotplug VFIO PCI devices, but we cannot attach them to an existing or a
new virtio-iommu device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This factorization is very important as it will allow both the standard
codepath and the VFIO PCI hotplug codepath to rely on the same function
to perform the addition of a new VFIO PCI device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Whenever the user wants to hotplug a new VFIO PCI device, the VMM will
have to trigger a hotplug notification through the GED device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces the new command "add-device" that will let a user
hotplug a VFIO PCI device to an already running VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Through the BusDevice implementation from the DeviceManager, and by
inserting the DeviceManager on the IO bus for a specific IO port range,
the VMM now has the ability to handle PCI device hotplug.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation of inserting the DeviceManager on the IO/MMIO buses,
the DeviceManager must implement the BusDevice trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Create a small method that will perform both hotplug of all the devices
identified by PCIU bitmap, and then perform the hotunplug of all the
devices identified by the PCID bitmap.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The _EJ0 method provides the guest OS a way to notify the VMM that the
device has been properly ejected from the guest OS. Only after this
point, the VMM can fully remove the device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new PHPR device in the DSDT table introduces some specific
operation regions and the associated fields.
PCIU stands for "PCI up", which identifies PCI devices that must be
added.
PCID stands for "PCI down", which identifies PCI devices that must be
removed.
B0EJ stands for "Bus 0 eject", which identifies which device on the bus
has been ejected by the guest OS.
Thanks to these fields, the VMM and the guest OS can communicate while
performing hotplug/hotunplug operations.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adds the DVNT method to the PCI0 device in the DSDT table. This new
method is responsible for checking each slot and notify the guest OS if
one of the slots is supposed to be added or removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces the ACPI support for describing the 32 device
slots attached to the main PCI host bridge.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation of the support for device hotplug, this commit moves the
DeviceManager object into an Arc<Mutex<>> when the DeviceManager is
being created. The reason is, we need the DeviceManager to implement the
BusDevice trait and then provide it to the IO bus, so that IO accesses
related to device hotplug can be handled correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We want to prevent from losing interrupts while they are masked. The
way they can be lost is due to the internals of how they are connected
through KVM. An eventfd is registered to a specific GSI, and then a
route is associated with this same GSI.
The current code adds/removes a route whenever a mask/unmask action
happens. Problem with this approach, KVM will consume the eventfd but
it won't be able to find an associated route and eventually it won't
be able to deliver the interrupt.
That's why this patch introduces a different way of masking/unmasking
the interrupts, simply by registering/unregistering the eventfd with the
GSI. This way, when the vector is masked, the eventfd is going to be
written but nothing will happen because KVM won't consume the event.
Whenever the unmask happens, the eventfd will be registered with a
specific GSI, and if there's some pending events, KVM will trigger them,
based on the route associated with the GSI.
Suggested-by: Liu Jiang <gerry@linux.alibaba.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Recently, vhost_user_block gained the ability of actively polling the
queue, a feature that can be disabled with the poll_queue property.
This change adds this property to DiskConfig, so it can be used
through the "disk" argument.
For the moment, it can only be used when vhost_user=true, but this
will change once virtio-block gets the poll_queue feature too.
Fixes: #787
Signed-off-by: Sergio Lopez <slp@redhat.com>
Fix "readonly" and "wce" defaults in cloud-hypervisor.yaml to match
their respective defaults in config.rs:DiskConfig.
Signed-off-by: Sergio Lopez <slp@redhat.com>
It's missing a few knobs (readonly, vhost, wce) that should be exposed
through the rest API.
Fixes: #790
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The kernel does not adhere to the ACPI specification (probably to work
around broken hardware) and rather than busy looping after requesting an
ACPI reset it will attempt to reset by other mechanisms (such as i8042
reset.)
In order to trigger a reset the devices write to an EventFd (called
reset_evt.) This is used by the VMM to identify if a reset is requested
and make the VM reboot. As the reset_evt is part of the VMM and reused
for both the old and new VM it is possible for the newly booted VM to
immediately get reset as there is an old event sitting in the EventFd.
The simplest solution is to "drain" the reset_evt EventFd on reboot to
make sure that there is no spurious events in the EventFd.
Fixes: #783
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Relying on the latest vm-memory version, including the freshly
introduced structure GuestMemoryAtomic, this patch replaces every
occurrence of Arc<ArcSwap<GuestMemoryMmap> with
GuestMemoryAtomic<GuestMemoryMmap>.
The point is to rely on the common RCU-like implementation from
vm-memory so that we don't have to do it from Cloud-Hypervisor.
Fixes#735
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If no socket is supplied when enabling "vhost_user=true" on "--disk"
follow the "exe" path in the /proc entry for this process and launch the
network backend (via the vmm_path field.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a virtio-fs device is created with a dedicated shared region, by
default the region should be mapped as PROT_NONE so that no pages can be
faulted in.
It's only when the guest performs the mount of the virtiofs filesystem
that we can expect the VMM, on behalf of the backend, to perform some
new mappings in the reserved shared window, using PROT_READ and/or
PROT_WRITE.
Fixes#763
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If no socket is supplied when enabling "vhost_user=true" on "--net"
follow the "exe" path in the /proc entry for this process and launch the
network backend (via the vmm_path field.)
Currently this only supports creating a new tap interface as the network
backend also only supports that.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It is necessary to do this at the start of the VMM execution rather than
later as it must be done in the main thread in order to satisfy the
checks required by PTRACE_MODE_READ_FSCREDS (see proc(5) and
ptrace(2))
The alternative is to run as CAP_SYS_PTRACE but that has its
disadvantages.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the ioctl syscall KVM_CREATE_VM gets interrupted while creating the
VM, it is expected that we should retry since EINTR should not be
considered a standard error.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the InterruptManager trait depend on an InterruptType forces
implementations into supporting potentially very different kind of
interrupts from the same code base. What we're defining through the
current, interrupt type based create_group() method is a need for having
different interrupt managers for different kind of interrupts.
By associating the InterruptManager trait to an interrupt group
configuration type, we create a cleaner design to support that need as
we're basically saying that one interrupt manager should have the single
responsibility of supporting one kind of interrupt (defined through its
configuration).
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We create 2 different interrupt managers for separately handling
creation of legacy and MSI interrupt groups.
Doing so allows us to have a cleaner interrupt manager and IOAPIC
initialization path. It also prepares for an InterruptManager trait
design improvement where we remove the interrupt source type dependency
by associating an interrupt configuration type to the trait.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
