This commit ensures that the HttpApi thread flushes all the responses
before the application shuts down. Without this step, in case of a
VmmShutdown request the application might terminate before the
thread sends a response.
Fixes: #6247
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
On platforms where PCIe P2P is supported, inject a PCI capability into
NVIDIA GPU to indicate support.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Host data that is passed to the hypervisor. Then
the firmware includes the data in the attestation report.
The data might include any key or secret that the SevSnp guest
might need later.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
The host data provided at launch. Data is passed
to the hypervisor during the completion of the
isolated import.
Host Data provided by the hypervisor during guest launch.
The firmware includes this value in all attestation
reports for the guest.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
With the nightly toolchain (2024-02-18) cargo check will flag up
redundant imports either because they are pulled in by the prelude on
earlier match.
Remove those redundant imports.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
When a guest running on a terminal reboots, the sigwinch_listener
subprocess exits and a new one restarts. The parent never wait()s
for children, so the old subprocess remains as a zombie. With further
reboots, more and more zombies build up.
As there are no other children for which we want the exit status,
the easiest fix is to take advantage of the implicit reaping specified
by POSIX when we set the disposition of SIGCHLD to SIG_IGN.
For this to work, we also need to set the correct default exit signal
of SIGCHLD when using clone3() CLONE_CLEAR_SIGHAND. Unlike the fallback
fork() path, clone_args::default() initialises the exit signal to zero,
which results in a child with non-standard reaping behaviour.
Signed-off-by: Chris Webb <chris@arachsys.com>
Allow cloud-hypervisor to direct boot the bzImage kernel format using
the regular 32 bit entry point. This can share the memory and vcpu
setup with the regular PVH boot code, but requires the setup of the
'zero page'.
Signed-off-by: Stefan Nuernberger <stefan.nuernberger@cyberus-technology.de>
In case of SEV-SNP guest devices use sw-iotlb to gain access guest
memory for DMA. For that F_IOMMU/F_ACCESS_PLATFORM must be exposed in
the feature set of virtio devices.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
The 'generate_ram_ranges' function currently hardcodes the assumption
that there are only 2 E820 RAM entries. This is not flexible enough to
handle vendor specific memory holes. Returning a Vec is also more
convenient for users of this function.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
Since the ACPI tables are generated inside the IGVM file in case of
SEV-SNP guest. So, we don't need to generate it inside the cloud
hypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
We occasionally saw cloud-hypervisor crashed due to seccomp violations. The
coredumps showed the HTTP API thread crashing after it attempted to call
sched_yield(). The call came from rust stdlib's mpmc module, which calls
sched_yield() if several attempts to busy-wait for a condition to fulfil fall
short.
Since the system call is harmless and it comes from the stdlib, I opted to allow
all threads to call it.
Signed-off-by: Peteris Rudzusiks <rye@stripe.com>
Currently the only way to set the affinity for virtio block threads is
to boot the VM, search for the tid of each of the virtio block threads,
then set the affinity manually. This commit adds an option to pin virtio
block queues to specific host cpus (similar to pinning vcpus to host
cpus). A queue_affinity option has been added to the disk flag in
the cli to specify a mapping of queue indices to host cpus.
Signed-off-by: acarp <acarp@crusoeenergy.com>
Traditional way to configure vcpu don't work for sev-snp guests. All the
vCPU configuration for SEV-SNP guest is provided via VMSA.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
On guests with large amounts of memory, using the `prefault` option can
lead to a very long boot time. This commit implements the strategy
taken by QEMU to prefault memory in parallel using multiple threads,
decreasing the time to allocate memory for large guests by
an order of magnitude or more.
For example, this commit reduces the time to allocate memory for a
guest configured with 704 GiB of memory on 1 NUMA node using 1 GiB
hugepages from 81.44134669s to just 6.865287881s.
Signed-off-by: Sean Banko <sbanko@crusoeenergy.com>
Beta clippy fix:
warning: initializer for `thread_local` value can be made `const`
--> vmm/src/sigwinch_listener.rs:27:40
|
27 | static TX: RefCell<Option<File>> = RefCell::new(None);
| ^^^^^^^^^^^^^^^^^^ help: replace with: `const { RefCell::new(None) }`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#thread_local_initializer_can_be_made_const
= note: `#[warn(clippy::thread_local_initializer_can_be_made_const)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Beta clippy fix:
warning: this call to `as_ref.map(...)` does nothing
--> vmm/src/device_manager.rs🔢9
|
1234 | self.console_resize_pipe.as_ref().map(Arc::clone)
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: try: `self.console_resize_pipe.clone()`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_asref
= note: `#[warn(clippy::useless_asref)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
When we import a page, we have a page with
some data or empty, empty does not mean there is no data,
it rather means it's full of zeros. We can skip writing the
data as guest memory of the page is already zeroed.
A page could be partially filled and the rest of the content is zero.
Our IGVM generation tool only fills data here if there is some data
without zeros. Rest of them are padded. We only write data
without padding and compare whether we complete writing
the buffer content. Still it's a full page and update the variable
with length of the full page.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This commit adds the debug-console (or debugcon) device to CHV. It is a
very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is
meant for printing information as easy as possible, without any
necessary configuration from the guest at all.
It is primarily interesting to OS/kernel and firmware developers as they
can produce output as soon as the guest starts without any configuration
of a serial device or similar. Furthermore, a kernel hacker might use
this device for information of type B whereas information of type A are
printed to the serial device.
This device is not used by default by Linux, Windows, or any other
"real" OS, but only by toy kernels and during firmware development.
In the CLI, it can be configured similar to --console or --serial with
the --debug-console parameter.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
This patch bumps the following crates, including `kvm-bindings@0.7.0`*,
`kvm-ioctls@0.16.0`**, `linux-loader@0.11.0`, `versionize@0.2.0`,
`versionize_derive@0.1.6`***, `vhost@0.10.0`,
`vhost-user-backend@0.13.1`, `virtio-queue@0.11.0`, `vm-memory@0.14.0`,
`vmm-sys-util@0.12.1`, and the latest of `vfio-bindings`, `vfio-ioctls`,
`mshv-bindings`,`mshv-ioctls`, and `vfio-user`.
* A fork of the `kvm-bindings` crate is being used to support
serialization of various structs for migration [1]. Also, code changes
are made to accommodate the updated `struct xsave` from the Linux
kernel. Note: these changes related to `struct xsave` break
live-upgrade.
** The new `kvm-ioctls` crate introduced breaking changes for
the `get/set_one_reg` API on `aarch64` [2], so code changes are made to
the new APIs.
*** A fork of the `versionize_derive` crate is being used to support
versionize on packed structs [3].
[1] https://github.com/cloud-hypervisor/kvm-bindings/tree/ch-v0.7.0
[2] https://github.com/rust-vmm/kvm-ioctls/pull/223
[3] https://github.com/cloud-hypervisor/versionize_derive/tree/ch-0.1.6Fixes: #6072
Signed-off-by: Bo Chen <chen.bo@intel.com>
Set the SEV control register so we know where to
start running. This register configures the
SEV feature control state on a virtual processor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
These Default implementations either don't produce valid configs, are
no longer used outside of tests, or both.
For the tests, we can define our own local "default" values that make
the most sense for the tests, without worrying about what's
a (somewhat) sensible "global" default value.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Bumping anyhow crate from 1.0.75 to 1.0.79 will cause seccomp
failures through integration tests. Newly added backtrace support
relies on readlink and many other syscalls.
Issue noticed with test_api_http_pause_resume test, where second time
of VM PAUSE or VM RESUME prints error and causes panic.
Noticed that panic message in a thread which is not allowed to write
output triggered the issue.
So implementing Display trait for HttpError and ApiError enums to avoid
adding many syscalls to seccomp filter section.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
On hosts with >256 cpus, setting the cpu affinity to a host cpu index
>255 will return an error because type of `host_cpu` is `u8`.
This commit changes the type of `host_cpu` to `usize` to remove this
limitation.
Signed-off-by: Sean Banko <sbanko@crusoeenergy.com>
Uses of the old ApiRequest enum conflated two different concerns:
identifying an API request endpoint, and storing data for an API
request. This led to ApiRequest values being passed around with junk
data just to communicate a request type, which forced all API request
body types to implement Default, which in some cases doesn't make any
sense — what's the "default" path for a vhost-user socket? The
nonsensical Default values have led to tests relying on being able to
use nonsensical data, which is an impediment to adding better
validation for these types.
Rather than having API request types be represented by an enum, which
has to carry associated body data everywhere it's used, it makes more
sense to represent API request types as trait objects. These can have
an associated type for the type of the request body, and this makes it
possible to pass API request types and data around as siblings in a
type-safe way without forcing them into a single value even where it
doesn't make sense. Trait objects also give us dynamic dispatch,
which lets us get rid of several large match blocks.
To keep it possible to fuzz the HTTP API, all the Vmm methods called
by the HTTP API are pulled out into a trait, so the fuzzer can provide
its own stub implementation of the VMM.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
The VIRTIO specification[1] says:
> The upper 32 bits of the CID are reserved and zeroed.
We should therefore not allow the user to supply a VSOCK CID with
those bits set. To accomplish this, limit the public API of the
virtio-vsock device to only accept 32-bit CIDs, while still using
64-bit CIDs internally since that's how virtio-vsock works.
[1]: https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html#x1-4400004
Signed-off-by: Alyssa Ross <hi@alyssa.is>
I accidentally ran a VM with CID 2 (VMADDR_CID_HOST), and very strange
and difficult to debug behavior ensued. I don't think a virtio-vsock
device should be allowed to have any of the special CIDs
(VMADDR_CID_ANY, VMADDR_CID_HYPERVISOR, VMADDR_CID_LOCAL, VMADDR_CID_HOST).
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Complete the isolated import, telling the
Microsoft hypervisor that import is done so that
MSHV can issue SNP_LAUNCH_FINISH command.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Import all the isolated pages after parsing is
done on the iGVM file. Hypervisor adds those
pages for PSP measurement(part of the hashing).
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add a 'rate_limit_groups' field to VmConfig that defines a set of
named RateLimiterGroups.
When the 'rate_limit_group' field of DiskConfig is defined, all
virtio-blk queues will be rate-limited by a shared RateLimiterGroup.
The lifecycle of all RateLimiterGroups is tied to the Vm.
A RateLimiterGroup may exist even if no Disks are configured to use
the RateLimiterGroup. Disks may be hot-added or hot-removed from the
RateLimiterGroup.
When the 'rate_limiter' field of DiskConfig is defined, we construct
an anonymous RateLimiterGroup whose lifecycle is tied to the Disk.
This is primarily done for api backwards compatability. Importantly,
the behavior is not the same! This implementation rate_limits the
aggregate bandwidth / iops of an individual disk rather than the
bandwidth / iops of an individual queue of a disk.
When neither the 'rate_limit_group' or the 'rate_limiter' fields of
DiskConfig is defined, the Disk is not rate-limited.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
This PR addresses a bug in which the cpu topology of a guest
with non power-of-two number of cores is incorrect. For example,
in some contexts, a virtual machine with 2-sockets and 12-cores
will incorrectly believe that 16 cores are on socket 1 and 8
cores are on socket 2. In other cases, common topology enumeration
software such as hwloc will crash.
The root of the problem was the way that cloud-hypervisor generates
apic_id. On x86_64, the (x2) apic_id embeds information about cpu
topology. The cpuid instruction is primarily used to discover the
number of sockets, dies, cores, threads, etc. Using this information,
the (x2) apic_id is masked to determine which {core, die, socket} the
cpu is on. When the cpu topology is not a power of two
(e.g. a 12-core machine), this requires non-contiguous (x2) apic_id.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
