Extract the majority of the code that provides the vhost-user-block
backend into its own crate and port the binary to use it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extract the majority of the code that provides the vhost-user-net
backend into its own crate and port the binary to use it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Generate the VM params until after the logging has been enabled. This
will make it possible to reuse the logging for vhost backends.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Previous commit added 'direct' support for virtio-blk to be able to
open files backing disk images with O_DIRECT, so add an integration
test for this new feature.
Signed-off-by: Sergio Lopez <slp@redhat.com>
vhost_user_blk already has it, so it's only fair to give it to
virtio-blk too. Extend DiskConfig with a 'direct' property, honor
it while opening the file backing the disk image, and pass it to
vm_virtio::RawFile.
Fixes#631
Signed-off-by: Sergio Lopez <slp@redhat.com>
Previous commit added 'readonly' support for virtio-blk to be able to
configure read-only devices, so add an integration test for this new
feature.
Signed-off-by: Sergio Lopez <slp@redhat.com>
vhost_user_blk already has it, so it's only fair to give it to
virtio-blk too. Extend DiskConfig with a 'readonly' properly, and pass
it to vm_virtio::Block.
Signed-off-by: Sergio Lopez <slp@redhat.com>
The build is run against "--all-features", "pci,acpi", "pci" and "mmio"
separately. The clippy validation must be run against the same set of
features in order to validate the code is correct.
Because of these new checks, this commit includes multiple fixes
related to the errors generated when manually running the checks.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both InterruptDelivery and InterruptParameters can be removed from the
pci crate as they are not used anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no need for assign_irq() or assign_msix() functions from the
PciDevice trait, as we can see it's never used anywhere in the codebase.
That's why it's better to remove these methods from the trait, and
slightly adapt the existing code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since the InterruptManager is never stored into any structure, it should
be passed as a reference instead of being cloned.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit replaces the way legacy interrupts were handled with the
brand new implementation of the legacy InterruptSourceGroup for KVM.
Additionally, since it removes the last bit relying on the Interrupt
trait, the trait and its implementation can be removed from the
codebase.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit replaces the way legacy interrupts were handled with the
brand new implementation of the legacy InterruptSourceGroup for KVM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit replaces the way legacy interrupts were handled with the
brand new implementation of the legacy InterruptSourceGroup for KVM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the previous commits, the legacy interrupt implementation can
be completed. The IOAPIC handler is used to deliver the interrupt that
will be triggered through the trigger() method.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By having a reference to the IOAPIC, the KvmInterruptManager is going
to be able to initialize properly the legacy interrupt source group.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to be able to use the InterruptManager abstraction with
virtio-mmio devices, this commit introduces InterruptSourceGroup's
skeleton for legacy interrupts.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When KvmInterruptManager initializes a new InterruptSourceGroup, it's
only for PCI_MSI_IRQ case that it needs to allocate the GSI and create a
new InterruptRoute. That's why this commit moves the general code into
the specific use case.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When the base InterruptIndex is different from 0, the loop allocating
GSI and HashMap entries won't work as expected. The for loop needs to
start from base, but the limit must be base+count so that we allocate
a number of "count" entries.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the InterruptManager be shared across both PCI and MMIO
devices, this commit moves the initialization earlier in the code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
After refactoring a common function is used to setup these slots and
that function takes care of allocating a new slot so it is not necessary
to reserve the initial region slots.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that KVM specific interrupts are handled through InterruptManager
trait implementation, the vm-virtio crate does not need to rely on
kvm_ioctls and kvm_bindings crates.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that KVM specific interrupts are handled through InterruptManager
trait implementation, the pci crate does not need to rely on kvm_ioctls
and kvm_bindings crates.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on all the previous changes, we can at this point replace the
entire interrupt management with the implementation of InterruptManager
and InterruptSourceGroup traits.
By using KvmInterruptManager from the DeviceManager, we can provide both
VirtioPciDevice and VfioPciDevice a way to pick the kind of
InterruptSourceGroup they want to create. Because they choose the type
of interrupt to be MSI/MSI-X, they will be given a MsiInterruptGroup.
Both MsixConfig and MsiConfig are responsible for the update of the GSI
routes, which is why, by passing the MsiInterruptGroup to them, they can
still perform the GSI route management without knowing implementation
details. That's where the InterruptSourceGroup is powerful, as it
provides a generic way to manage interrupt, no matter the type of
interrupt and no matter which hypervisor might be in use.
Once the full replacement has been achieved, both SystemAllocator and
KVM specific dependencies can be removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
After the skeleton of InterruptManager and InterruptSourceGroup traits
have been implemented, this new commit takes care of fully implementing
the content of KvmInterruptManager (InterruptManager trait) and
MsiInterruptGroup (InterruptSourceGroup).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces an empty implementation of both InterruptManager
and InterruptSourceGroup traits, as a proper basis for further
implementation.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
These new traits are meant to abstract the knowledge about the
hypervisor and the type of interrupt being used from the perspective
of the devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Thanks to the recently introduced function notifier() in the
VirtioInterrupt trait, all vhost-user devices can now bypass
listening onto an intermediate event fd as they can provide the
actual fd responsible for triggering the interrupt directly to
the vhost-user backend.
In case the notifier does not provide the event fd, the code falls
back onto the creation of an intermediate event fd it needs to listen
to, so that it can trigger the interrupt on behalf of the backend.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The point is to be able to retrieve directly the event fd related to
the interrupt, as this might optimize the way VirtioDevice devices are
implemented.
For instance, this can be used by vhost-user devices to provide
vhost-user backends directly with the event fd triggering the
interrupt related to a virtqueue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Callbacks are not the most Rust idiomatic way of programming. The right
way is to use a Trait to provide multiple implementation of the same
interface.
Additionally, a Trait will allow for multiple functions to be defined
while using callbacks means that a new callback must be introduced for
each new function we want to add.
For these two reasons, the current commit modifies the existing
VirtioInterrupt callback into a Trait of the same name.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
At this point, both MSI and MSI-X handle the KVM GSI routing update,
which means the vfio crate does not have to deal with it anymore.
Therefore, several functions can be removed from the vfio-pci code, as
they are not needed anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that MsiConfig has access to both KVM VmFd and the list of GSI
routes, the update of the KVM GSI routes can be directly done from
MsiConfig instead of specifically from the vfio-pci implementation.
By moving the KVM GSI routes update at the MsiConfig level, any PCI
device such as vfio-pci, virtio-pci, or any other emulated PCI device
can benefit from it, without having to implement it on their own.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The same way we have MsixConfig in charge of managing whatever relates
to MSI-X vectors, we need a MsiConfig structure to manage MSI vectors.
The MsiCap structure is still needed as a low level API, but it is now
part of the MsiConfig which oversees anything related to MSI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to factorize one step further, we let MsixConfig perform the
interrupt enabling/disabling. This is done by registering/unregistering
the KVM irq_fds of all GSI routes related to this device.
And now that MsixConfig is in charge of the irq_fds, vfio-pci must rely
on it to retrieve them and provide them to the vfio driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that MsixConfig has access to the irq_fd descriptors associated with
each vector, it can directly write to it anytime it needs to trigger an
interrupt.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
