These were erroneously skipping features for the unit tests and the
"build" target for dev_cli.sh
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
These are never run by the CI and is inconsistent with the way we build
test which is specified inside the .github workflows.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit unifies the custom linux kernel build in x86, Arm, and
performance metrics to the same function. Therefore, when bumping
the kernel version, we can make sure we only need to make the change
in one place.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit makes sure that the custom linux kernel is always
rebuilt when running the performance metrics tests, and therefore
changes to the kernel config file is always caught.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
On Arm64, the fio binary that comes from ubuntu distribution cannot
support io_uring, which is a required engine for the block
performance tests in performance metrics. Therefore this commit
build the fio from a relatively new version, and replace the native
ubuntu fio with the newly build one.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Changes in commit "scripts: aarch64: Reduce source code build in CI"
for the Linux kernel will lead to the kernel cannot be rebuilt if
the config file is changed. Therefore should be reverted.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
As Linux kernel, edk2, virtiofd, SPDK are all build from source, we
need to find a way to reduce the number of source code build.
To address this issue, this commit adds a stage that touching a
".built" file to each repo of the source code after a successfully
build. By checking if the ".built" file exists, we can determine
if there is already an old build. Since the source code repo will
be removed and cloned again when we bump the repo hash, the CI will
rebuild the repo.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Adding two new integration tests for vDPA, relying on both block and net
simulators from the host kernel.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To be consistently with the integration scripts, we now pass through the
`--test-filter` option of the test scripts to the `performance-metrics`
binary. Now the following two commands achieve the same results:
`$./scripts/dev_cli.sh tests --metrics -- --test-filter boot_time_ -- --test-filter latency`
`$./scripts/dev_cli.sh tests --metrics -- -- --test-filter boot_time_ --test-filter latency`
Note that, the test scripts support only single occurrence of the
`--test-filter` option while the `performance-metrics` binary allows
multiple occurrences for filtering based on different keywords.
Fixes: #3787
Signed-off-by: Bo Chen <chen.bo@intel.com>
Adding the missing TARGET_CC environment variable to get the build to
complete correctly.
Fixes#3776
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Let's officially have a way to pass the features used to build
cloud-hypervisor to the dev_cli.sh script.
This doesn't invalidate the previous commit, as we still don't what the
features_build variable to be quoted, otherwise we face the following
issue:
```
error: Found argument '--features tdx' which wasn't expected, or isn't valid in this context
Did you mean --features?
USAGE:
cargo build --all --features <FEATURES>...
```
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
2805e7b1dc quoted enclose variables to
prevent globbing or incorrect splitting. However, by doing with with
$features_build it broke the capability to call the script as:
```
$ ./scripts/dev_cli.sh build --release --libc musl -- --features tdx
```
Before 2805e7b1dc it simply worked, after,
the result is:
```
docker run --user 1000:1000 --workdir /cloud-hypervisor --rm --volume /dev/kvm --volume /home/ffidenci/go/src/github.com/cloud-hypervisor/cloud-hypervisor:/cloud-hypervisor --env RUSTFLAGS= cloudhypervisor/dev:20220223-0 cargo build --all '' --target-dir /cloud-hypervisor/build/cargo_target --features tdx --release --target x86_64-unknown-linux-musl
error: Found argument '' which wasn't expected, or isn't valid in this context
USAGE:
cargo build --all
For more information try --help
```
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The dev container interface script (e.g. 'dev_cli.sh') now supports the
following arguments syntax for running tests:
`tests [--unit|--cargo|--all] [--libc musl|gnu] [-- [<test scripts args>] [-- [<test binary args>]]] `
In this way, we can pass custom arguments to the test binary (either
"cargo test" or "performance-metrics") with our dev container script.
For example:
`$ ./dev_cli.sh tests --metrics -- -- --report-file /tmp/metrics.json --test-filter latency`
`$ ./dev_cli.sh tests --integration -- --test-filter "test_serial" -- --nocapture --test-threads=1`
Fixes: #3739
Signed-off-by: Bo Chen <chen.bo@intel.com>
If `--local` is provided or if the version is not available then build
the container before use. This allows combining updates to the
Dockerfile with a full CI run.
Drop the "--dev" parameter as we only support one container type for
simplicity.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To run unit tests correctly on musl target, We don't need to provide
specific "CFLAGS" or "TARGET_CC", as long as we use the correct build
target `*-linux-musl` with the "cargo test" command.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The SPDK-NVMe is needed for the integration test for vfio_user.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
Update documentation and CI to rely on the new CLOUDHV.fd firmware built
from the newly introduced target CloudHvX64.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By pinning the OVMF version, we will be able to update the EDK2 fork
with a new version without potentially breaking our Cloud Hypervisor CI.
Once the new version is ready on the EDK2 fork, we'll be able to update
Cloud Hypervisor codebase, replacing the fixed version with the latest,
as well as replacing OVMF.fd with CLOUDHV.fd. This is because we'll
start building from the new target CloudHvX64.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given integration tests don't have special annotations, all our
integration test scripts do not need to carry special flags when running
`cargo test`. This commit also removed the "test::" prefix for
pattern-matching different set of integration tests.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This updated tree now includes a fix for virtio-net regression that was
present in 5.14:
commit 732b74d647048668f0f8dc0c848f0746c69e2e2f
Author: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Date: Sat Oct 9 05:17:53 2021 -0400
virtio-net: fix for skb_over_panic inside big mode
commit 126285651b7f ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net")
accidentally reverted the effect of
commit 1a8024239da ("virtio-net: fix for skb_over_panic inside big mode")
on drivers/net/virtio_net.c
As a result, users of crosvm (which is using large packet mode)
are experiencing crashes with 5.14-rc1 and above that do not
occur with 5.13.
Crash trace:
[ 61.346677] skbuff: skb_over_panic: text:ffffffff881ae2c7 len:3762 put:3762 head:ffff8a5ec8c22000 data:ffff8a5ec8c22010 tail:0xec2 end:0xec0 dev:<NULL>
[ 61.369192] kernel BUG at net/core/skbuff.c:111!
[ 61.372840] invalid opcode: 0000 [#1] SMP PTI
[ 61.374892] CPU: 5 PID: 0 Comm: swapper/5 Not tainted 5.14.0-rc1 linux-v5.14-rc1-for-mesa-ci.tar.bz2 #1
[ 61.376450] Hardware name: ChromiumOS crosvm, BIOS 0
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Bumping the OVMF binary version along with UEFI documentation to
reflect the latest set of patches on top of tianocore/edk2 'master'
branch, which can be found on the Cloud Hypervisor fork on 'ch' branch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This script checks if an image is compatible with Cloud Hypervisor.
At first, it detects the image type(raw or qcow2),
partition type whether it is DOS or GPT.
Then it mounts the image and checks if VIRTIO Configs
are enabled in the kernel config. In the end, it provides
a message about the compatibility of the image.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
In integration test, we fetch latest EDK2 code on its master branch and
build. While the update on EDK2 master is frequent. And the building is
time consuming. It takes a lot of time in CI and local test. Floating on
top of a busy master branch also bring potential risk in tracking and
debugging.
Now that Cloud Hypervisor support in EDK2 has been steady, we can pin
the EDK2 software versions to avoid unnecessary updating and building.
We can update the versions manually every after several months.
The commit also optimizes the build process by applying multi-threaded
compiling.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Added a bash function in integration test script to checkout source code
of a GIT repo with specified branch and commit.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
On AArch64, ACPI must work with UEFI (EDK2). This way, the kernel is
always loaded from the disk image. We can not specify a direct custom
kernel while using ACPI.
To use a custom kernel, we have to replace the kernel file in the disk
image by:
- Making a copy of the Focal `raw` image
- Mounting the rootfs with `libguestfs-tools`
- Replacing the compressed kernel file
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Moving to the latest kernel 5.14 simplifies greatly the list of patches
that we need to carry. Since virtio-iommu has been merged as part of the
5.14 release, the only remaining patches are virtio-watchdog and the EFI
reboot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Currently the latest cloudhypervisor/dev docker container is the
multi-arch image. We can pull the arm image directly.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The edk2 upstream has already suppoorted AArch64 Cloud Hypervisor,
and hence we can use upstream edk2 in CI and doc.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
AArch64 tests were divided into 2 steps:
- Build and test with 'acpi' feature
- Build and test without 'acpi'
This can be optimized. We need only to build and test once with default
features ('acpi' is enabled).
On AArch64, ACPI only works with UEFI. If UEFI is not available, guest
kernel fall back to use FDT. Most AArch64 test cases boot from direct
kernel, the guest will keep using FDT even if ACPI is enabled. So
nothing is broken.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Since using the VIRTIO configuration to expose the virtual IOMMU
topology has been deprecated, the virtio-iommu implementation must be
updated.
In order to follow the latest patchset that is about to be merged in the
upstream Linux kernel, it must rely on ACPI, and in particular the newly
introduced VIOT table to expose the information about the list of PCI
devices attached to the virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Some new integration tests will require the "stress" binary to be
present in the guest in order to run correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit added support for building the edk2 binary dedicated
for the Cloud Hypervisor (CLOUDHV_EFI.fd).
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Re-enable virtiofsd testing now that issues with capstone repository
have been resolved.
This reverts commit a14c70019a.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The CI is failing due the git server that the submodules required for
this fork of QEMU need to build from is unavailable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
(cherry picked from commit 2aec0a92a5)
In order to avoid regression regarding OVS-DPDK support, a new
integration test is added. This test consists of running two VMs, both
attached to a distinct OVS port, where both ports are connected to an
OVS bridge. Once the VM are running, the test validates the connection
between the two VMs works correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Re-enable virtiofsd testing now that issues with capstone repository
have been resolved.
This reverts commit 2aec0a92a5.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on dnsmasq running on the host, the Windows guest are now
getting allocated with the expected IP addresses. This allows for
multiple VMs, therefore multiple tests to run in parallel.
The end goal is to reduce the time spent running Windows integration
tests.
Fixes#1891
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on guest Ubuntu image 21.04, including a 5.11 kernel, this patch
adds some additional tests to the VFIO baremetal integration tests. It
adds a test for ACPI memory hotplug, another one for virtio-mem memory
hotplug, and finally a test for hotplugging the NVIDIA card.
The existing test already taking care of the reboot has been renamed.
The script running "cargo test" has been modified to run only one thread
at a time, so that each test run sequentially. This is mandatory since
the card can't be shared across multiple VMs.
Fixes#2404
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The CI is failing due the git server that the submodules required for
this fork of QEMU need to build from is unavailable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use the PVH vmlinux for all tests (with the exception of the specific
bzImage test.)
See: #2231
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The 5.12 kernel contains a fix for issues observed with nested snapshot
& restore.
Fixes: #2535
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Update the Ubuntu Focal image used as the guest image. It's based on the
latest Focal image released on April 1st 2021, and customized to include
all the utilities we need. As usual, snapd and pollinate services have
been removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on a NVIDIA Tesla T4 card present in the SGX machine, this patch
enables baremetal VFIO testing, validated by running several NVIDIA
tools in the guest. The guest image has been prepared to include all the
software needed to run these tests.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Currently script does not exit early if the image/firmware not present
in the host. We should not progress further if the images are not pre
downloaded.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
e.g.
scripts/dev_cli.sh tests --integration -- --test-filter test_watchdog
This used to be supported by passing "$@" but was broken when multiple
hypervisor support was added.
Fixes: #2182
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
