When reporting the BAR size it is necessary to return a value that is
encoded such that all the bits are set that represent the mask of the
natural alignment of the field.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add support for specifying the PCI revision in the PCI configuration and
populate this with the value of 1 for virtio-pci devices.
The virtio-pci specification is slightly ambiguous only saying that
transitional (i.e. devices that support legacy and virtio 1.0) should
set this to 0. In practice it seems that software expects the revision
to be set to 1 for modern only devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
OVMF and other standard firmwares use I/O port 0x402 as a simple debug
port by writing ASCII characters to it. This is gated under a feature
that is not enabled by default.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
After all the previous refactoring patches, we can finally create
multiple threads under the same backend. This is directly combined with
multiqueues so that it will create one thread per queue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Anticipating the follow up patches to run multiple threads for the same
backend, we need the initialization of the disk to happen in the high
level structure VhostUserBlkBackend.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The DiskFile will need to be shared across multiple threads when running
multiple queues across these threads. That's why it needs to be put
inside an Arc. The reason for the Mutex is because execute() expects a
mutable object implementing Read + Write + Seek. Unfortunately, this
create a contention point as the object needs to be locked from each
thread, reducing the performance gain we will get with multiple threads.
The need for an immutable object would solve this problem, and it will
be addressed later through follow up patches.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is no need for retrieving the VringWorker since we don't need to
register some extra file descriptors to the epoll loop.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We now support assigning device ids for VFIO and virtio-pci devices so
this error can be generalised.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend the eject_device() method on DeviceManager to also support
virtio-pci devices being unplugged.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add an accessor to return the underlying VirtioDevice. This is useful
for managing the removal of the device from internal datastructures when
handling virtio-pci device unplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to support hotplugging there is a map of human readable device
id to PCI BDF map.
As the device id is part of the specific device configuration (e.g.
NetConfig) it is necessary to return the id through from the helper
functions that create the devices through to the functions that add
those devices to the bus. This necessitates changing a great deal of
function prototypes but otherwise has little impact.
Currently only if an id is supplied by the user as part of the device
configuration is it populated into this map. A later commit will
populate with an autogenerated name where none is supplied by the user.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to support freeing the memory that is allocated we need to make
sure that we update the internal representation so that free_bars() can
correctly free the memory if the device has its BARs moved.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Implement the free_bars() method from the PciDevice trait which is used
as part of the device removal process. Although there is only one BAR
allocated by VirtioPciDevice simplify the code by using a vector.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that ownership of the memory regions used for the virtio-pmem and
vhost-user-fs devices have been moved into those devices it is no longer
necessary to track them inside DeviceManager.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the release of the managed memory region from the DeviceManager to
the vhost-user-fs device. This ensures that the memory will be freed when
the device is unplugged which will lead to it being Drop()ed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the release of the managed memory region from the DeviceManager to
the virtio-pmem device. This ensures that the memory will be freed when
the device is unplugged which will lead to it being Drop()ed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By implementing queues_per_thread(), this patch fills the last missing
bit to enable multithreaded multiqueue support for the vhost-user-net
backend implementation.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By adding a "thread_id" parameter to handle_event(), the backend crate
can now indicate to the backend implementation which thread triggered
the processing of some events.
This is applied to vhost-user-net backend and allows for simplifying a
lot the code since each thread is identical.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By adding the "thread_index" parameter to the function exit_event() from
the VhostUserBackend trait, the backend crate now has the ability to ask
the backend implementation about the exit event related to a specific
thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to prepare for the support of multithreaded multiqueues, the
structure VhostUserNetThread is simplified to hold only one RX queue,
one TX queue, and one TAP interface.
Following this change, VhostUserNetBackend now holds a list of threads
instead of going through each thread to handle multiqueues.
These changes decouple neatly the abstraction between the backend and
each thread. This allows for a lot of simplification since we now know
all threads are identical, hence the handling of events becomes very
straightforward.
One important point is that each thread can be locked when in use,
without causing any contention with other threads since the backend
doesn't need to be locked anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that multiple worker threads can be run from the backend crate, it
is important that each backend implementation can access every worker
thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to support multiqueues running on multiple threads for
increasing the IO performances, this commit introduces a new function
queues_per_thread() to the VhostUserBackend trait.
This gives each backend implementation the opportunity to define which
queues belong to which thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By changing the mutability of this function, after adapting all
backends, we should be able to implement multithreads with
multiqueues support without hitting a bottleneck on the backend
locking.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both blk, net and fs backends have been updated to avoid the requirement
of having handle_event(&mut self). This will allow the backend crate to
avoid taking a write lock onto the backend object, which will remove the
potential contention point when multiple threads will be handling
multiqueues.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
While testing self spawned vhost-user backends, it appeared that the
backend was aborting due to a missing system call in the seccomp
filters. mremap() was the culprit and this patch simply adds it to the
whitelist.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This should make it a pointer in the Go generated code so that it will
be ommitted and thus not populated with an unhelpful default value.
Fixes: #1015
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This ensures that the field is filled with None when it is not specified
as part of the deserialisation step.
Fixes: #1015
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We can now allow guests that specify an initramfs to boot
using the PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Fill and write to guest memory the necessary boot module
structure to allow a guest using the PVH boot protocol
to load an initramfs image.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
This allows the validation of this requirement for both command line
booted VMs and those booted via the API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows the validation of this requirement for both command line
booted VMs and those booted via the API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
