Let's put an underscore "_" in front of each device name to identify
when it has been set internally.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio-console was not added to the list of Migratable devices,
which is fixed from this patch.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
It is based off the name from the virtio device attached to this
transport layer.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
It is based off the name from the virtio device attached to this
transport layer.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because we know we will need every virtio device to be identified with a
unique id, we can simplify the code by making the identifier mandatory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Even in the context of "mmio" feature, we need the next device name to
be generated as we need to identify virtio-mmio devices to support
snapshot and restore functionalities.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will be later used to identify each device used by the VM in order
to perform introspection and snapshot/restore properly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will be later used to identify each device used by the VM in order
to perform introspection and snapshot/restore properly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will be later used to identify each device used by the VM in order
to perform introspection and snapshot/restore properly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will be later used to identify each device used by the VM in order
to perform introspection and snapshot/restore properly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will be later used to identify each device used by the VM in order
to perform introspection and snapshot/restore properly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the virtio-console device is supposed to be placed behind the virtual
IOMMU, this must be explicitly propagated through the code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the virtio-rng device is supposed to be placed behind the virtual
IOMMU, this must be explicitly propagated through the code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the virtio-vsock device is supposed to be placed behind the virtual
IOMMU, this must be explicitly propagated through the code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that all virtio devices are assigned with identifiers, they could
all be removed from the VM. This is not something that we want to allow
because it does not make sense for some devices. That's why based on the
device type, we remove the device or we return an error to the user.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By giving the devices ids this effectively enables the removal of the
device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The parameters regarding the attachment to the virtio-iommu device was
not propagated correclty, and any modification to the configuration was
not stored back into it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's possible to have multiple vsock devices so in preparation for
hotplug/unplug it is important to be able to have a unique identifier
for each device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If a size is specified use it (in particular this is required if the
destination is a directory) otherwise seek in the file to get the size
of the file.
Add a new check that the size is a multiple of 2MiB otherwise the kernel
will reject it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a virtio device is dynamically removed from the VM through the
hot-unplug mechanism, every mapping associated with it must be properly
removed.
Based on the previous patches letting a VirtioDevice expose the list of
userspace mappings associated with it, this patch can now remove all the
KVM userspace memory regions through the MemoryManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When hot-unplugging the virtio-pmem from the VM, we don't remove the
associated userspace mapping. This patch will let us fix this in a
following patch. For now, it simply adapts the code so that the Pmem
device knows about the mapping associated with it. By knowing about it,
it can expose it to the caller through the new userspace_mappings()
function.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The hotplugged virtio devices were not added to the list of virtio
devices from the DeviceManager. This patch fixes it, as it was causing
hotplugged virtio-fs devices from not supporting memory hotplug, since
they were never getting the update as they were not part of the list of
virtio devices held by the DeviceManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adds DeviceManager method `make_virtio_fs_device` which creates a single
device, and modifies `make_virtio_fs_devices` to use this method.
Implements the new `vm.add-fs route`.
Signed-off-by: Dean Sheather <dean@coder.com>
In the context of the shared memory region used by virtio-fs in order to
support DAX feature, the shared region is exposed as a dedicated PCI
BAR, and it is backed by a KVM userspace mapping.
Upon BAR remapping, the BAR is moved to a different location in the
guest address space, and the KVM mapping must be updated accordingly.
Additionally, we need the VirtioDevice to report the updated guest
address through the shared memory region returned by get_shm_regions().
That's why a new setter is added to the VirtioDevice trait, so that
after the mapping has been updated for KVM, we can tell the VirtioDevice
the new guest address the shared region is located at.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The order the elements are pushed into the list is important to restore
them in the right order. This is particularly important for MmioDevice
(or VirtioPciDevice) and their VirtioDevice counterpart.
A device must be fully ready before its associated transport layer
management can trigger its restoration, which will end up activating the
device in most cases.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
OVMF and other standard firmwares use I/O port 0x402 as a simple debug
port by writing ASCII characters to it. This is gated under a feature
that is not enabled by default.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We now support assigning device ids for VFIO and virtio-pci devices so
this error can be generalised.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend the eject_device() method on DeviceManager to also support
virtio-pci devices being unplugged.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to support hotplugging there is a map of human readable device
id to PCI BDF map.
As the device id is part of the specific device configuration (e.g.
NetConfig) it is necessary to return the id through from the helper
functions that create the devices through to the functions that add
those devices to the bus. This necessitates changing a great deal of
function prototypes but otherwise has little impact.
Currently only if an id is supplied by the user as part of the device
configuration is it populated into this map. A later commit will
populate with an autogenerated name where none is supplied by the user.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that ownership of the memory regions used for the virtio-pmem and
vhost-user-fs devices have been moved into those devices it is no longer
necessary to track them inside DeviceManager.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the release of the managed memory region from the DeviceManager to
the vhost-user-fs device. This ensures that the memory will be freed when
the device is unplugged which will lead to it being Drop()ed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the release of the managed memory region from the DeviceManager to
the virtio-pmem device. This ensures that the memory will be freed when
the device is unplugged which will lead to it being Drop()ed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By aggregating snapshots from the CpuManager, the MemoryManager and the
DeviceManager, Vm implements the snapshot() function from the
Snapshottable trait.
And by restoring snapshots from the CpuManager, the MemoryManager and
the DeviceManager, Vm implements the restore() function from the
Snapshottable trait.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Based on the list of Migratable devices stored by the DeviceManager, the
DeviceManager can implement the Snapshottable trait by aggregating all
devices snapshots together.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
