This commit introduces the application of the seccomp filter to the VMM
thread. The filter is empty for now (SeccompLevel::None).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the seccomp crate, we create a new vmm module responsible for
creating a seccomp filter that will be applied to the VMM main thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The seccomp crate from Firecracker is nicely implemented, documented and
tested, which is a good reason for relying on it to create and apply
seccomp filters.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Virtio-fs daemon expects fs_slave_io() returns the number of bytes
read/written on success, but we always return 0 and make userspace think
nothing has been read/written.
Fix it by returning the actual bytes read/written. Note that This
depends on the corresponding fix in vhost crate.
Fixes: #949
Signed-off-by: Eryu Guan <eguan@linux.alibaba.com>
Factorise test_virtio_pmem to test changes are not persisted if file is
readonly.
As virtio-mem is now supported in the upstream kernel we can switch to
using the firmware.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than using a raw OS disk image. This will be useful when the test
is extended to doing I/O on the image.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This opens the backing file read-only, makes the pages in the mmap()
read-only and also makes the KVM mapping read-only. The file is also
mapped with MAP_PRIVATE to make the changes local to this process only.
This is functional alternative to having support for making a
virtio-pmem device readonly. Unfortunately there is no concept of
readonly virtio-pmem (or any type of NVDIMM/PMEM) in the Linux kernel so
to be able to have a block device that is appears readonly in the guest
requires significant specification and kernel changes.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use this boolean to turn on the KVM_MEM_READONLY flag to indicate that
this memory mapping should not be writable by the VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
According to `asm-generic/termios.h`, the `struct winsize` should be:
struct winsize {
unsigned short ws_row;
unsigned short ws_col;
unsigned short ws_xpixel;
unsigned short ws_ypixel;
};
The ioctl of TIOCGWINSZ will trigger a segfault on aarch64.
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
This feature is stable and there is no need for this to be behind a
flag. This will also reduce the time needed to run the integration test
as we will not be running them all again under the flag.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This table currently contains only all the VFIO devices and it should
really contain all the PCI devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Previously this was only returned if the device had an IOMMU mapping and
whether the device should be added to the virtio-iommu. This was already
captured earlier as part of creating the device so use that information
instead.
Always returning the B/D/F is helpful as it facilitates virtio PCI
device hotplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Implement missing support for FUSE_LSEEK, which basically implies
calling to libc::lseek on the file handle. As this operation alters
the file offset, we take a write lock on the File's RwLock.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Add a document to illustrate how to test vhost-user-net function with
OpenVSwitch + DPDK as backend.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
On x86_64, a hint to the compiler is not enough, we need to issue a
MFENCE instruction. Replace the Acquire fence with a SeqCst one.
Without this, it's still possible to miss an used_event update,
leading to the omission of a notification, possibly stalling the
vring.
Signed-off-by: Sergio Lopez <slp@redhat.com>
I spent a few minutes trying to understand why we were unconditionally
updating the VM config memory size, even if the guest memory resizing
did not happen.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We set it to 0xff, which is for unregistered loaders.
The kernel checks that the bootloader ID is set when e.g. loading
ramdisks, so not setting it when we get a bootparams header from the
loader will prevent the kernel from loading ramdisks.
Fixes: #918
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The IORT table for virtio-iommu use was removed and replaced with a
purely virtio based solution. Although the table construction was
removed these structures were left behind.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Virtiofs's dax window can be used as read/write's source (e.g. mmap a file
on virtiofs), but the dax window area is not shared with vhost-user
backend, i.e. virtiofs daemon.
To make those IO work, addresses of this kind of IO source are routed to
VMM via FS_IO requests to perform a read/write from an fd directly to the
given GPA.
This adds the support of FS_IO request to clh's vhost-user-fs master part.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Add an integration test that builds cloud-hypervisor with
the pvh_boot feature and boots a kernel built with CONFIG_PVH.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Validate correct GDT entries, initial segment configuration, and control
register bits that are required by PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Expand the unit tests to cover the configure_system() code when
using the PVH boot protocol. Verify the method for adding memory
map table entries in the format specified by PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Use a new feature called "pvh_boot" to enable using the PVH boot
protocol if the guest kernel supports it. The feature can be enabled
by building with:
cargo build [--release] --features "pvh_boot"
Once performance has been evaluated, this can be made part of the
default set of features so that any guest that supports it boots
using PVH as the preferred option as is the case in QEMU.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Fill the hvm_start_info and related memory map structures as
specified in the PVH boot protocol. Write the data structures
to guest memory at the GPA that will be stored in %rbx when
the guest starts.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
In order to properly initialize the kvm regs/sregs structs for
the guest, the load_kernel() return type must specify which
boot protocol to use with the entry point address it returns.
Make load_kernel() return an EntryPoint struct containing the
required information. This structure will later be used
in the vCPU configuration methods to setup the appropriate
initial conditions for the guest.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Create supporting definitions to use the hvm start info and memory
map table entry struct definitions from the linux-loader crate in
order to enable PVH boot protocol support
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
@dependabot bumped the dependency to 0.4.10 but this is no longer a
valid version so downgrade appropriately.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
