After refactoring a common function is used to setup these slots and
that function takes care of allocating a new slot so it is not necessary
to reserve the initial region slots.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that KVM specific interrupts are handled through InterruptManager
trait implementation, the vm-virtio crate does not need to rely on
kvm_ioctls and kvm_bindings crates.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that KVM specific interrupts are handled through InterruptManager
trait implementation, the pci crate does not need to rely on kvm_ioctls
and kvm_bindings crates.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on all the previous changes, we can at this point replace the
entire interrupt management with the implementation of InterruptManager
and InterruptSourceGroup traits.
By using KvmInterruptManager from the DeviceManager, we can provide both
VirtioPciDevice and VfioPciDevice a way to pick the kind of
InterruptSourceGroup they want to create. Because they choose the type
of interrupt to be MSI/MSI-X, they will be given a MsiInterruptGroup.
Both MsixConfig and MsiConfig are responsible for the update of the GSI
routes, which is why, by passing the MsiInterruptGroup to them, they can
still perform the GSI route management without knowing implementation
details. That's where the InterruptSourceGroup is powerful, as it
provides a generic way to manage interrupt, no matter the type of
interrupt and no matter which hypervisor might be in use.
Once the full replacement has been achieved, both SystemAllocator and
KVM specific dependencies can be removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
After the skeleton of InterruptManager and InterruptSourceGroup traits
have been implemented, this new commit takes care of fully implementing
the content of KvmInterruptManager (InterruptManager trait) and
MsiInterruptGroup (InterruptSourceGroup).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces an empty implementation of both InterruptManager
and InterruptSourceGroup traits, as a proper basis for further
implementation.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
These new traits are meant to abstract the knowledge about the
hypervisor and the type of interrupt being used from the perspective
of the devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Thanks to the recently introduced function notifier() in the
VirtioInterrupt trait, all vhost-user devices can now bypass
listening onto an intermediate event fd as they can provide the
actual fd responsible for triggering the interrupt directly to
the vhost-user backend.
In case the notifier does not provide the event fd, the code falls
back onto the creation of an intermediate event fd it needs to listen
to, so that it can trigger the interrupt on behalf of the backend.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The point is to be able to retrieve directly the event fd related to
the interrupt, as this might optimize the way VirtioDevice devices are
implemented.
For instance, this can be used by vhost-user devices to provide
vhost-user backends directly with the event fd triggering the
interrupt related to a virtqueue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Callbacks are not the most Rust idiomatic way of programming. The right
way is to use a Trait to provide multiple implementation of the same
interface.
Additionally, a Trait will allow for multiple functions to be defined
while using callbacks means that a new callback must be introduced for
each new function we want to add.
For these two reasons, the current commit modifies the existing
VirtioInterrupt callback into a Trait of the same name.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
At this point, both MSI and MSI-X handle the KVM GSI routing update,
which means the vfio crate does not have to deal with it anymore.
Therefore, several functions can be removed from the vfio-pci code, as
they are not needed anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that MsiConfig has access to both KVM VmFd and the list of GSI
routes, the update of the KVM GSI routes can be directly done from
MsiConfig instead of specifically from the vfio-pci implementation.
By moving the KVM GSI routes update at the MsiConfig level, any PCI
device such as vfio-pci, virtio-pci, or any other emulated PCI device
can benefit from it, without having to implement it on their own.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The same way we have MsixConfig in charge of managing whatever relates
to MSI-X vectors, we need a MsiConfig structure to manage MSI vectors.
The MsiCap structure is still needed as a low level API, but it is now
part of the MsiConfig which oversees anything related to MSI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to factorize one step further, we let MsixConfig perform the
interrupt enabling/disabling. This is done by registering/unregistering
the KVM irq_fds of all GSI routes related to this device.
And now that MsixConfig is in charge of the irq_fds, vfio-pci must rely
on it to retrieve them and provide them to the vfio driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that MsixConfig has access to the irq_fd descriptors associated with
each vector, it can directly write to it anytime it needs to trigger an
interrupt.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that MsixConfig has access to both KVM VmFd and the list of GSI
routes, the update of the KVM GSI routes can be directly done from
MsixConfig instead of specifically from the vfio-pci implementation.
By moving the KVM GSI routes update at the MsixConfig level, both
vfio-pci and virtio-pci (or any other emulated PCI device) can benefit
from it, without having to implement it on their own.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because MsixConfig will be responsible for updating KVM GSI routes at
some point, it is necessary that it can access the list of routes
contained by gsi_msi_routes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because MsixConfig will be responsible for updating the KVM GSI routes
at some point, it must have access to the VmFd to invoke the KVM ioctl
KVM_SET_GSI_ROUTING.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The point here is to let MsixConfig take care of the GSI allocation,
which means the SystemAllocator must be passed from the vmm crate all
the way down to the pci crate.
Once this is done, the GSI allocation and irq_fd creation is performed
by MsixConfig directly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to anticipate the need for both msi.rs and msix.rs to rely on
some KVM utils and InterruptRoute structure to handle the update of the
KVM GSI routes, this commit adds these utilities directly to the pci
crate. So far, these were exclusively used by the vfio crate, which is
why there were located there.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because we will need to share the same list of GSI routes across
multiple PCI devices (virtio-pci, VFIO), this commit moves the creation
of such list to a higher level location in the code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This test is a variant of test_boot_vhost_user_blk(), named
test_boot_vhost_user_blk_direct(), that instances the vhost-user-blk
daemon with 'direct=true', to test this recently introduced feature
for opening files with O_DIRECT.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Add missing WCE (write-cache enable) property support. This not only
an enhancement, but also a fix for a bug.
Right now, when vhost_user_blk uses a qcow2 image, it doesn't write
the QCOW2 metadata until the guest explicitly requests a flush. In
practice, this is equivalent to the write back semantic.
Without WCE, the guest assumes write through for the virtio_blk
device, and doesn't send those flush requests. Adding support for WCE,
and enabling it by default, we ensure the guest does send said
requests.
Supporting "WCE = false" would require updating our qcow2
implementation to ensure that, when required, it honors the write
through semantics by not deferring the updates to QCOW2 metadata.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Add support for opening the disk images with O_DIRECT. This allows
bypassing the host's file system cache, which is useful to avoid
polluting its cache and for better data integrity.
This mode of operation can be enabled by adding the "direct=<bool>"
parameter to the "backend" argument:
./target/debug/vhost_user_blk --backend image=test.raw,sock=/tmp/vhostblk,direct=true
The "direct" parameter defaults to "false", to preserve the original
behavior.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Use RawFile as backend instead of File. This allows us to abstract
the access to the actual image with a specialized layer, so we have a
place where we can deal with the low-level peculiarities.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Doing I/O on an image opened with O_DIRECT requires to adhere to
certain restrictions, requiring the following elements to be aligned:
- Address of the source/destination memory buffer.
- File offset.
- Length of the data to be read/written.
The actual alignment value depends on various elements, and according
to open(2) "(...) there is currently no filesystem-independent
interface for an application to discover these restrictions (...)".
To discover such value, we iterate through a list of alignments
(currently, 512 and 4096) calling pread() with each one and checking
if the operation succeeded.
We also extend RawFile so it can be used as a backend for QcowFile,
so the later can be easily adapted to support O_DIRECT too.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Update queue number with 4 to verify if vhost-user-net device
and backend could work well with multiple queue.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
There are two new options num_queues and queue_size defined for
virtio-net, add them in test_valid_vm_config_net which is used
to validate that both the CLI and the OpenAPI will generate the
same configuration.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Update the common part in net_util.rs under vm-virtio to add mq
support, meanwhile enable mq for virtio-net device, vhost-user-net
device and vhost-user-net backend. Multiple threads will be created,
one thread will be responsible to handle one queue pair separately.
To gain the better performance, it requires to have the same amount
of vcpus as queue pair numbers defined for the net device, due to
the cpu affinity.
Multiple thread support is not added for vhost-user-net backend
currently, it will be added in future.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Add num_queues and queue_size for virtio-net device to make them configurable,
while add the associated options in command line.
Update cloud-hypervisor.yaml with the new options for NetConfig.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Add support to allow VMMs to open the same tap device many times, it will
create multiple file descriptors meanwhile.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Current guest kernel will check the oneline cpu count, in principle,
if the online cpu count is not smaller than the number of queue pairs
VMM reported, the net packets could be put/get to all the virtqueues,
otherwise, only the number of queue pairs that match the oneline cpu
count will have packets work with. guest kernel will send command
through control queue to tell VMMs the actual queue pair numbers which
it could currently play with. Add mq process in control queue handling
to get the queue pair number, VMM will verify if it is in a valid range,
nothing else but this.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
While feature VIRTIO_NET_F_CTRL_VQ is negotiated, control queue
will exits besides the Tx/Rx virtqueues, an epoll handler should
be started to monitor and handle the control queue event.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
As virtio spec 1.1 said, the driver uses the control queue
to send commands to manipulate various features of the devices,
such as VIRTIO_NET_F_MQ which is required by multiple queue
support. Here add the control queue handling process.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Since the common parts are put into net_util.rs under vm-virtio,
refactoring code for virtio-net device, vhost-user-net device
and backend to shrink the code size and improve readability
meanwhile.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
There are some common logic shared among virtio-net device, vhost-user-net
device and vhost-user-net backend, abstract those parts into net_util.rs
to improve code maintainability and readability.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
According to virtio spec, for used buffer notifications, if
MSI-X capability is enabled, and queue msix vector is
VIRTIO_MSI_NO_VECTOR 0xffff, the device must not deliver an
interrupt for that virtqueue.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
