Add a test that supports configuring serial and console as TTY mode
at the same time. With this configuration, the VM can set up a legacy
serial device as an early printk console device, and then change to a
virito console device after the virito console device is initialized.
In this case, we can capture the logs printed by legacy serial on early
boot, and later by the virtio console.
Signed-off-by: Yong He <alexyonghe@tencent.com>
Cloud Hypovrisor supports legacy serial device and virito console device
for VMs. Using legacy serial device, CH can capture full VM console logs,
but its implementation is based on KVM PIO emulation and has poor
performance. Using the virtio console device, the VM console logs will
be sent to CH through the virtio ring, the performance is better, but CH
will only capture the VM console logs after the virtio console device is
initialized, the VM early startup logs will be discarded.
This patch provides a way to enable both the legacy serial device and the
virtio console device as a TTY mode by setting the leagcy serial port as
the VM's early printk device and setting the virtio console as the VM's
main console device.
Then CH can capture early boot logs from the legacy serial device and
capture later logs from the virito console device with better performance.
Signed-off-by: Yong He <alexyonghe@tencent.com>
The script "run_integration_tests_vfio.sh" requires to be ran on a
specific machine with specific hardware (e.g. the "vfio" bera-metal
worker equipped with a Nvidia Tesla T4 card). So the provisioning of the
running machine is out of the scope of this script, including the custom
guest image with Nvidia drivers installed, and properly configured
Nvidia Tesla T4 card.
See: #4405, #5509
Signed-off-by: Bo Chen <chen.bo@intel.com>
With #4324 being resolved, the nested VFIO test (e.g. "test_vfio") is
now a part of the general Azure VM-based workers. No need to run it on
the bare-metal worker.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Now, default values for vcpu topology are 0s, that is not correct and may
lead to bug. Fix it by setting default value to 1s. Also add check in
case one or more of these values are zero.
Fixes: #5892
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
virtiofsd must be built with the default gnu toolchain so clear the
environment variables that may poisoned by the alternative C library
support.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The seccompiler v0.4.0 started to use `seccomp` syscall instead of the
`prctl` syscall. Also, threads for virtio-deivces should not need any of
these syscalls anyway.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This is very similar MMIO read emulation for SEV-SNP guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
MMIO emulation is also performed via VMGEXIT in case of SEV-SNP guest.
Emulation is done in a very similar way like a regular guest. Just need
to make sure that guest memory is access via read/write GPA hypercall
instead of directly accessing it.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Legacy port emulation requires reading RAX register from GHCB page for
SEV-SNP guest. This is the major difference between a regular guest and
SEV-SNP enabled guest.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Currently MSHV does not support fetching extended guest report and thus
return an appropriate error stating the NAE event is not valid.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Nuno Das Neves <nudasnev@microsoft.com>
As part of this handling there are 4 different operations:
1. Getting the hypervisor preffered doorbell page GPA.
2. Informing hypervisor about the doorbell page chosen by the guest
3. Querying the GPA of the doorbell page
4. Clearing the GPA of the doorbell page from hypervisor
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
As part of handling this request, hypervisor is expected to three
things:
1. Maximum GHCB protocol version supported.
2. Minimum GHCB protocol version supported.
3. SEV-page table encryption bit number.
If the guest cannot support the protocol range supplied by the
hypervisor, it should terminate
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
SEV-SNP guest allocates a GHCB page and in order to update hypervisor
about the same, there is a vmgexit which allows registering GHCB page
with the hypervisor.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
A VMGEXIT exit occurs for any of the listed NAE events in the GHCB
specification [1] (e.g. CPUID, RDMSR/WRMSR, MMIO, port IO, etc.). Some
of these events are handled by hypervisor while other are handled by
VMM. Currently, we are adding support for one such request i.e.,
report supported SEV-SNP features by hypervisor.
[1] GHCB protocol specification:
https://www.amd.com/content/dam/amd/en/documents/epyc-technical-docs/specifications/56421.pdf
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This is the function that needs to be called by the VMM
to inform the MSHV that isolation is complete and inform
PSP about this completion.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add hypervisor VM specific API to import the isolated
pages. Hypervisor adds those pages for PSP measurement.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This patch fixes following warnings:
error: boolean to int conversion using if
--> vmm/src/vm.rs:866:42
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| __________________________________________^
| | 1 // SEV_SNP_ENABLED
| | } else {
| | 0 // SEV_SNP_DISABLED
| | })
| |_____________________^ help: replace with from: `u64::from(sev_snp_enabled.into())`
|
= note: `-D clippy::bool-to-int-with-if` implied by `-D warnings`
= note: `sev_snp_enabled.into() as u64` or `sev_snp_enabled.into().into()` can also be valid options
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#bool_to_int_with_if
error: useless conversion to the same type: `bool`
--> vmm/src/vm.rs:866:45
|
| .create_vm_with_type(if sev_snp_enabled.into() {
| ^^^^^^^^^^^^^^^^^^^^^^ help: consider removing `.into()`: `sev_snp_enabled`
|
= note: `-D clippy::useless-conversion` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#useless_conversion
error: could not compile `vmm` due to 2 previous errors
Signed-off-by: Muminul Islam <muislam@microsoft.com>
