This patch has been cherry-picked from the Firecracker tree. The
reference commit is 78ca0a942f32140465c67ea4b45d68c52c72d751.
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 6dbe8e021a64ba3742081741a7538cdfd93a102e.
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 78819f35f63f5777a58e3e1e774b3270b32881ed.
The vsock TX buffer flush operation would report inconsistent results,
under specific circumstances.
The flush operation is performed in two steps, since it's dealing with a
ring buffer, an the data to be flushed may wrap around. If the first
step was successful, but the second one failed, the whole flush
operation would report an error, thus causing flow control accounting to
lose track of the bytes that were successfully written by the first
pass.
This commit changes the flush behavior to always report success when
some data has been written to the backing stream.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 2da612a9cdce85c91fb54ab22d950ec6ccc93b27.
Fixed a bug introduced by a271d08f0b1ba0ee82761cd49244b6a8017bcede,
whereby the flow control accouting would be off by a few bytes, for
host-initiated connections.
The connection ack message ("OK <port_num><CR>") was accounted for as
data sent by the guest, so its length was substracted from the total
amount of data the guest was allowed to send.
This commit changes the way this ack message is sent, so that it
bypasses flow control accouting.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 109e631566350867dafa4b16c3919dfd1533eeea.
This commit changes the vsock connection state machine behavior to absorb
any EWOULDBLOCK errors recevied while handling an EPOLLOUT event. Previously,
this condition would lead to immediate connection termination.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 660d18cf7fee5b38c3b1b17a5da6544b9025909d.
Apparently, epoll_wait sometimes yields false EPOLLIN events (i.e. events
follwing which read() would fail with EWOULDBLOCK). This would cause the
vsock connection state machine to terminate connections, since an error
was detected on the underlying Unix socket.
This commit changes the vsock connection state machine code to handle such
erroneous EPOLLIN events by absorbing EWOULDBLOCK read() errors.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 1cc8b8a678eb28b20f5843556bdb7fbb2dfa6284.
Fixed a logical error in the vsock flow control, that would cause credit
update packets to not be sent at the right time.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is d2475773557c82d2abad2fc8bdf69e7d01444109.
Fixed a vsock muxer issue that would cause a connection to be removed
from the RX queue, even though it still had pending RX data.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch adds `is_empty` method to VsockPacket to fix the
following clippy error:
error: item `vsock::packet::VsockPacket` has a public `len` method but no corresponding `is_empty` method
--> vm-virtio/src/vsock/packet.rs💯1
|
100 | / impl VsockPacket {
101 | | /// Create the packet wrapper from a TX virtq chain head.
102 | | ///
103 | | /// The chain head is expected to hold valid packet header data. A following packet buffer
... |
334 | | }
335 | | }
| |_^
|
= note: `-D clippy::len-without-is-empty` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_without_is_empty
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Currently, not every feature of the cloud-hypervisor is enabled
on AArch64, which means that on AArch64 machines, the
`run_unit_tests.sh` needs to be tailored and some unit test cases
should be run on x86_64 only.
Also this commit fixes the typo and unifies `Arm64` and `AArch64`
in the AArch64 document.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Its test case calls remove unconditionally. Instead of making the test
code call remove conditionally, removing the pci_support dependency
simplifies things -- that function is just a wrapper around HashMap's
remove function anyway.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
cloud-hypervisor: 763.978581807s: ERROR:pci/src/vfio.rs:651 -- failed to remove all guest memory regions from iommu table
when poweroff a vm with vfio device, clh will finally remove all guest memory region from iommu table
with the method unset_dma_map, not method setup_dma_map.
Signed-off-by: LiYa'nan <oliverliyn@gmail.com>
Upon PCI hotplug, the VMM now returns some information about the device
name and the associated b/d/f. This patch extends the integration tests
so that we validate the response is the one that is expected.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that PCI device hotplug returns a response, the OpenAPI definition
must reflect it, describing what is expected to be received.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to provide a more comprehensive b/d/f to the user, the
serialization of PciDeviceInfo is implemented manually to control the
formatting.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch completes the series by connecting the dots between the HTTP
frontend and the device manager backend.
Any request to hotplug a VFIO, disk, fs, pmem, net, or vsock device will
now return a response including the device name and the place of the
device in the PCI topology.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Pass from the device manager to the calling code the information about
the PCI device that has just been hotplugged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to provide the device name and PCI b/d/f associated with a
freshly hotplugged device, the hotplugging functions from the device
manager return a new structure called PciDeviceInfo.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Rust nightly builds are currently failing due to a crate outside of
our control not meeting the latest cargo requirements.
See XAMPPRocky/remove_dir_all#19
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The support of AArch64 is in very early stage. The steps in building and
runing on X86 and AArch64 can not align well yet. Adding AArch64 content
to README.md would produce much divergence.
Adding a guide in docs/ folder could be a better way to start now.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
X86 and AArch64 work in different ways to shutdown a VM.
X86 exit VMM event loop through ACPI device;
AArch64 need to exit from CPU loop of a SystemEvent.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Screened IO bus because it is not for AArch64.
Enabled Serial, RTC and Virtio devices with MMIO transport option.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Implemented GSI allocator and system allocator for AArch64.
Renamed some layout definitions to align more code between architectures.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This fixes the build warning below
warning: use of deprecated item 'tap::tests::pnet::datalink::NetworkInterface::mac_address': Please use NetworkInterface's field 'mac' instead.
--> net_util/src/tap.rs:530:24
|
530 | (interface.mac_address(), tx, rx)
| ^^^^^^^^^^^
|
= note: `#[warn(deprecated)]` on by default
Signed-off-by: Anatol Belski <ab@php.net>
For correctness, when the CPUID supports the LA57 feature, the VMM sets
the CR4.LA57 register, which means a fifth level of page table might be
needed. Even if it's not needed because the kernel should not use
addresses over 1GiB, it's better to define this new level anyway.
This patch only applies to the Linux boot codepath, which means it
affects both vmlinux without PVH and bzImage binaries. The bzImage
does not need this since the page tables and CR4 registers are set in
the decompression code from the kernel.
And for vmlinux with PVH, if we follow the PVH specification, the kernel
must be responsible for setting things up, but the implementation is
missing. This means for now that PVH does not support LA57 with 5 levels
of paging.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
