Instead of erroring out when trying to change the configuration of the
VM somewhere between the VM was created but not yet booted, let's allow
users to change that without any issue, as long as the VM has already
been created.
Fixes: #3639
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add very basic unit for the vm_add_$device() functions, so we can
easily expand those when changing its behaviour in the coming commits.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of doing the validation of the configuration change as part of
the vm, let's do this in the uper layer, in the Vmm.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's move add_to_config to config.rs so it can be used from both inside
and outside of the vm.rs file.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The GitHub security reporting link only works for those who are
repository owners.
Fixes: #3701
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
TDx support is already present on the project for quite some time, but
the TDx configuration was not yet exposed to the ones using CH via the
OpenAPI auto generated code.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Since the devices behind the IOMMU cannot be changed at runtime we offer
the ability to place all devices on user chosen segments behind the
IOMMU. This allows the hotplugging of devices behind the IOMMU provided
that they are assigned to a segment that is located behind the iommu.
Fixes: #911
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introducing a new integration test relying on the virtio-balloon ability
to free host pages that have been reported as freed by the guest.
This test checks that after consuming a lot of RAM in the guest, the VMM
process is able to releases the pages reported by the guest. Simply done
by checking the RSS associated with the VMM's process follows the memory
trend in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Implement the VIRTIO_BALLOON_F_REPORTING feature, indicating to the
guest it can report set of free pages. A new virtqueue dedicated for
receiving the information about the free pages is created. The VMM
releases the memory by punching holes with fallocate() if the guest
memory is backed by a file, and madvise() the host about the ranges of
memory that shouldn't be needed anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a new parameter free_page_reporting=on|off to the balloon device
so that we can enable the corresponding feature from virtio-balloon.
Running a VM with a balloon device where this feature is enabled allows
the guest to report pages that are free from guest's perspective. This
information is used by the VMM to release the corresponding pages on the
host.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Improving the existing code for better readability and in anticipation
for adding an additional virtqueue for the free page reporting feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
No need to run the Jenkins CI on pull request for which exclusively
markdown files have been modified.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since AZURE_CONNECTION_STRING is only useful for the Windows build,
let's remove it from other builds where it's not invoked.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a bit of documentation and links about the TDShim and how to run
it with Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This should not occur as ioeventfd is used for notification. Such an
error message would have made the discovery of the underlying cause of
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to allow for human readable output for the VM configuration, we
pull it out of the snapshot, which becomes effectively the list of
states from the VM. The configuration is stored through a dedicated file
in JSON format (not including any binary output).
Having the ability to read and modify the VM configuration manually
between the snapshot and restore phases makes debugging easier, as well
as empowers users for extending the use cases relying on the
snapshot/restore feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As per this kernel documentation:
For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN,
KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding
operations are complete (and guest state is consistent) only after userspace
has re-entered the kernel with KVM_RUN. The kernel side will first finish
incomplete operations and then check for pending signals.
The pending state of the operation is not preserved in state which is
visible to userspace, thus userspace should ensure that the operation is
completed before performing a live migration. Userspace can re-enter the
guest with an unmasked signal pending or with the immediate_exit field set
to complete pending operations without allowing any further instructions
to be executed.
Since we capture the state as part of the pause and override it as part
of the resume we must ensure the state is consistent otherwise we will
lose the results of the MMIO or PIO operation that caused the exit from
which we paused.
Fixes: #3658
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove the bits about this feature being experimental, as well as
limitations around virtio-mem and vhost-user devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The patch mechanism in Cargo.toml doesn't support features to be
specified, and was leading to the following warning:
warning: patch for `kvm-bindings` uses the features mechanism.
default-features and features will not take effect because the patch
dependency does not support this mechanism
Removing the "features" parameter from the patch fixes this warning
without breaking the build.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we allows to reuse the struct `Guest` with kernel paths and
kernel commands (e.g. hardcoded constants) that are tests-specific.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Instead of using hardcoded firmware paths inside the `Guest` struct
constructor, this commit removes `fw_path` related code paths from the
`Guest` struct and asks each test constructs its firmware path
explicitly. This allows better flexibility for the `Guest` struct so
that it can be reused for the performance tests we are adding soon.
Signed-off-by: Bo Chen <chen.bo@intel.com>
If a payload is found in the TDVF section, and after it's been copied to
the guest memory, make sure to create the corresponding TdPayload
structure and insert it through the HOB.
Signed-off-by: Jiaqi Gao <jiaqi.gao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a new method to the TdHob structure so that we can easily insert
a HOB_PAYLOAD_INFO_TABLE into the HOB.
Signed-off-by: Jiaqi Gao <jiaqi.gao@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case of TDX, if a kernel and/or a command line are provided by the
user, they can't be treated the same way as for the non-TDX case. That
is why this patch ensures the function load_kernel() is only invoked for
the non-TDX case.
For the TDX case, whenever TDVF contains a Payload and/or PayloadParam
sections, the file provided through --kernel and the parameters provided
through --cmdline are copied at the locations specified by each TDVF
section.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the recent updates of the TDVF specification introducing new
types of TDVF sections, let's extend the enum in our code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The TDVF specification has been updated with the ability to provide a
specific payload, which means we will be able to achieve direct kernel
boot.
For that reason, let's not prevent the user from using --kernel
parameter when running with TDX.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make sure Cloud Hypervisor relies on upstream and actively maintained
vfio-ioctls crate from the rust-vmm/vfio repository instead of the
deprecated version coming from rust-vmm/vfio-ioctls repository.
Fixes#3673
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that we introduced a separate method to indicate when the migration
is started, both start_dirty_log() and stop_dirty_log() don't have to
carry an implicit meaning as they can focus entirely on the dirty log
being started or stopped.
For that reason, we can now safely move stop_dirty_log() to the code
section performing non-local migration. It makes only sense to stop
logging dirty pages if this has been started before.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to clearly decouple when the migration is started compared to
when the dirty logging is started, we introduce a new method to the
Migratable trait. This clarifies the semantics as we don't end up using
start_dirty_log() for identifying when the migration has been started.
And similarly, we rely on the already existing complete_migration()
method to know when the migration has been ended.
A bug was reported when running a local migration with a vhost-user-net
device in server mode. The reason was because the migration_started
variable was never set to "true", since the start_dirty_log() function
was never invoked.
Signed-off-by: lizhaoxin1 <Lxiaoyouling@163.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since both vhost-user-block and vhost-user-net backend now rely on the
upstream vhost-user-backend crate from rust-vmm, we can simply remove
the local version of the crate from our repository.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of relying on the local version of vhost-user-backend, this
patch allows the block backend implementation to rely on the upstream
version of the crate from rust-vmm.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
