This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
A Snapshottable component can snapshot itself and
provide a MigrationSnapshot payload as a result.
A MigrationSnapshot payload is a map of component IDs to a list of
migration sections (MigrationSection). As component can be made of
several Migratable sub-components (e.g. the DeviceManager and its
device objects), a migration snapshot can be made of multiple snapshot
itself.
A snapshot is a list of migration sections, each section being a
component state snapshot. Having multiple sections allows for easier and
backward compatible migration payload extensions.
Once created, a migratable component snapshot may be transported and this
is what the Transportable trait defines, through 2 methods: send and recv.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
When a virtio device is paused an event is written to the appropriate
"pause" EventFd for the device. This will be noticed by the the device's
epoll_wait(), an atomic bool checked an if true then the thread is
parked(). When resuming the bool is reset and the thread is unpark()ed.
However the event triggering the pause is still in the EventFd so the
epoll_wait() will continue to return but because the boolean is not set
the thread will not be park()ed but instead we will busy loop around an
event that is not being consumed.
The solution is to drain the "pause" EventFd when the event is first
received and thus the epoll_wait() will only return for the pause event
once. This resolves the infinite epoll_wait() wake-ups.
Fixes: #869
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Relying on the latest vm-memory version, including the freshly
introduced structure GuestMemoryAtomic, this patch replaces every
occurrence of Arc<ArcSwap<GuestMemoryMmap> with
GuestMemoryAtomic<GuestMemoryMmap>.
The point is to rely on the common RCU-like implementation from
vm-memory so that we don't have to do it from Cloud-Hypervisor.
Fixes#735
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Remove duplicated code across the different devices by handling
the virtio feature pages in VirtioDevice itself rather than
in the backends. This works as no virtio devices use feature
bits beyond 64-bits.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Now that we unified epoll_thread to potentially be a vector of threads,
it makes sense to make it a plural field.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Although only the block and net virtio devices can actually be multi
threaded (for now), handling them as special cases makes the code more
complex.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Callbacks are not the most Rust idiomatic way of programming. The right
way is to use a Trait to provide multiple implementation of the same
interface.
Additionally, a Trait will allow for multiple functions to be defined
while using callbacks means that a new callback must be introduced for
each new function we want to add.
For these two reasons, the current commit modifies the existing
VirtioInterrupt callback into a Trait of the same name.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This allows us to change the memory map that is being used by the
devices via an atomic swap (by replacing the map with another one). The
ArcSwap provides the mechanism for atomically swapping from to another
whilst still giving good read performace. It is inside an Arc so that we
can use a single ArcSwap for all users.
Not covered by this change is replacing the GuestMemoryMmap itself.
This change also removes some vertical whitespace from use blocks in the
files that this commit also changed. Vertical whitespace was being used
inconsistently and broke rustfmt's behaviour of ordering the imports as
it would only do it within the block.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Due to the amount of code currently duplicated across virtio devices,
the stats for this commit is on the large side but it's mostly more
duplicated code, unfortunately.
Migratable and Snapshotable placeholder implementations are provided as
well, making all virtio devices Migratable.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Adding virtio feature VIRTIO_F_IOMMU_PLATFORM when explicitly asked by
the user. The need for this feature is to be able to attach the virtio
device to a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this virtio-rng implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind
it to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Following the refactoring of the code allowing multiple threads to
access the same instance of the guest memory, this patch goes one step
further by adding RwLock to it. This anticipates the future need for
being able to modify the content of the guest memory at runtime.
The reasons for adding regions to an existing guest memory could be:
- Add virtio-pmem and virtio-fs regions after the guest memory was
created.
- Support future hotplug of devices, memory, or anything that would
require more memory at runtime.
Because most of the time, the lock will be taken as read only, using
RwLock instead of Mutex is the right approach.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The VMM guest memory was cloned (copied) everywhere the code needed to
have ownership of it. In order to clean the code, and in anticipation
for future support of modifying this guest memory instance at runtime,
it is important that every part of the code share the same instance.
Because VirtioDevice implementations need to have access to it from
different threads, that's why Arc must be used in this case.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The structure of the vmm-sys-util crate has changed with lots of code
moving to submodules.
This change adjusts the use of the imported structs to reference the
submodules.
Fixes: #145
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The existing code taking care of the epoll loop was too restrictive as
it was propagating the error returned from the epoll_wait() syscall, no
matter what was the error. This causes the epoll loop to be broken,
leading to a non-functional virtio device.
This patch enforces the parsing of the returned error and prevent from
the error propagation in case it is EINTR, which stands for Interrupted.
In case the epoll loop is interrupted, it is appropriate to retry.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As per the VIRTIO specification, every virtio device configuration can
be updated while the guest is running. The guest needs to be notified
when this happens, and it can be done in two different ways, depending
on the type of interrupt being used for those devices.
In case the device uses INTx, the allocated IRQ pin is shared between
queues and configuration updates. The way for the guest to differentiate
between an interrupt meant for a virtqueue or meant for a configuration
update is tied to the value of the ISR status field. This field is a
simple 32 bits bitmask where only bit 0 and 1 can be changed, the rest
is reserved.
In case the device uses MSI/MSI-X, the driver should allocate a
dedicated vector for configuration updates. This case is much simpler as
it only requires the device to send the appropriate MSI vector.
The cloud-hypervisor codebase was not supporting the update of a virtio
device configuration. This patch extends the existing VirtioInterrupt
closure to accept a type that can be Config or Queue, so that based on
this type, the closure implementation can make the right choice about
which interrupt pin or vector to trigger.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because we cannot always assume the irq fd will be the way to send
an IRQ to the guest, this means we cannot make the assumption that
every virtio device implementation should expect an EventFd to
trigger an IRQ.
This commit organizes the code related to virtio devices so that it
now expects a Rust closure instead of a known EventFd. This lets the
caller decide what should be done whenever a device needs to trigger
an interrupt to the guest.
The closure will allow for other type of interrupt mechanism such as
MSI to be implemented. From the device perspective, it could be a
pin based interrupt or an MSI, it does not matter since the device
will simply call into the provided callback, passing the appropriate
Queue as a reference. This design keeps the device model generic.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Most of the code is taken from crosvm(bbd24c5) but is modified to
be adapted to the current VirtioDevice definition and epoll
implementation.
A new command option '--rng' is provided and it gives one the option
to override the entropy source which is /dev/urandom by default.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
