Renaming translate() to translate_gva() to clarify we want to translate
a GVA address into a GPA.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new trait simplifies the address translation of a GuestAddress by
having GuestAddress implementing it.
The three crates virtio-devices, block_util and net_util have been
updated accordingly to rely on this new trait, helping with code
readability and limiting the amount of duplicated code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Moving the whole codebase to rely on the AccessPlatform definition from
vm-virtio so that we can fully remove it from virtio-queue crate.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since we're trying to move away from the translation happening in the
virtio-queue crate, the device itself is performing the address
translation when needed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of relying on the virtio-queue crate to store the information
about the MSI-X vectors for each queue, we handle this directly from the
PCI transport layer.
This is the first step in getting closer to the upstream version of
virtio-queue so that we can eventually move fully to the upstream
version.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This crate contains up to date definition of the Queue, AvailIter,
DescriptorChain and Descriptor structures forked from the upstream
crate rust-vmm/vm-virtio 27b18af01ee2d9564626e084a758a2b496d2c618.
The following patches have been applied on top of this base in order to
make it work correctly with Cloud Hypervisor requirements:
- Add MSI vector field to the Queue
In order to help with MSI/MSI-X support, it is convenient to store the
value of the interrupt vector inside the Queue directly.
- Handle address translations
For devices with access to data in memory being translated, we add to
the Queue the ability to translate the address stored in the
descriptor.
It is very helpful as it performs the translation right after the
untranslated address is read from memory, avoiding any errors from
happening from the consumer's crate perspective. It also allows the
consumer to reduce greatly the amount of duplicated code for applying
the translation in many different places.
- Add helpers for Queue structure
They are meant to help crate's consumers getting/setting information
about the Queue.
These patches can be found on the 'ch' branch from the Cloud Hypervisor
fork: https://github.com/cloud-hypervisor/vm-virtio.git
This patch takes care of updating the Cloud Hypervisor code in
virtio-devices and vm-virtio to build correctly with the latest version
of virtio-queue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the vm-virtio/virtio-queue crate from rust-vmm which has been
copied inside the Cloud Hypervisor tree, the entire codebase is moved to
the new definition of a Queue and other related structures.
The reason for this move is to follow the upstream until we get some
agreement for the patches that we need on top of that to make it
properly work with Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce a common solution for spawning the virtio threads which will
make it easier to add the panic handling.
During this effort I discovered that there were no seccomp filters
registered for the vhost-user-net thread nor the vhost-user-block
thread. This change also incorporates basic seccomp filters for those as
part of the refactoring.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We are relying on applying empty 'seccomp' filters to support the
'--seccomp false' option, which will be treated as an error with the
updated 'seccompiler' crate. This patch fixes this issue by explicitly
checking whether the 'seccomp' filter is empty before applying the
filter.
Signed-off-by: Bo Chen <chen.bo@intel.com>
As the first step to complete live-migration with tracking dirty-pages
written by the VMM, this commit patches the dependent vm-memory crate to
the upstream version with the dirty-page-tracking capability. Most
changes are due to the updated `GuestMemoryMmap`, `GuestRegionMmap`, and
`MmapRegion` structs which are taking an additional generic type
parameter to specify what 'bitmap backend' is used.
The above changes should be transparent to the rest of the code base,
e.g. all unit/integration tests should pass without additional changes.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Add a helper to VirtioCommon which returns duplicates of the EventFds
for kill and pause event.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Simplify snapshot & restore code by using generics to specify helper
functions that take / make a Serialize / Deserialize struct
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `TYPE_UNKNOWN` contains a capitalized acronym
--> vm-virtio/src/lib.rs:48:5
|
48 | TYPE_UNKNOWN = 0xFF,
| ^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `Type_Unknown`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the function can never return an error this is now a clippy failure:
error: this function's return value is unnecessarily wrapped by `Result`
--> virtio-devices/src/watchdog.rs:215:5
|
215 | / fn set_state(&mut self, state: &WatchdogState) -> io::Result<()> {
216 | | self.common.avail_features = state.avail_features;
217 | | self.common.acked_features = state.acked_features;
218 | | // When restoring enable the watchdog if it was previously enabled. We reset the timer
... |
223 | | Ok(())
224 | | }
| |_____^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_wraps
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Even though the driver can provide fewer queues than those advertised
for some device types their is a minimum number that is required for
operation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than having to give and return the ioeventfd used for a device
clone them each time. This will make it simpler when we start handling
the driver enabling fewer queues than advertised by the device.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to make the thread naming more useful derive their name from
the device id (which can be supplied by the user) and a device specific
suffix that has details of the individual queue (or queue pair.)
e.g.
rob@artemis:~$ pstree -p -c -l -t `pidof cloud-hypervisor`
cloud-hyperviso(27501)─┬─{_console}(27525)
├─{_disk0_q0}(27529)
├─{_disk0_q1}(27532)
├─{_net1_ctrl}(27533)
├─{_net1_qp0}(27534)
├─{_net1_qp1}(27535)
├─{_rng}(27526)
├─{http-server}(27504)
├─{seccomp_signal_}(27502)
├─{signal_handler}(27523)
├─{vcpu0}(27520)
├─{vcpu1}(27522)
└─{vmm}(27503)
Fixes: #2077
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The goal here is to replace anywhere possible a virtio structure
with a "C, packed" representation by a "C" representation. Some
virtio structures are not expected to be packed, therefore there's
no reason for using the more restrictive "C, packed" representation.
This is important since "packed" representation can still cause
undefined behaviors with Rust 2018.
By removing the need for "packed" representation, we can simplify a
bit of code by deriving the Serialize trait without writing the
implementation ourselves.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to simplify the transition to VirtioCommon and to avoid needing
to set empty fields derive Default for VirtioCommon.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There will be some cases where the implementation of the snapshot()
function from the Snapshottable trait will require to modify some
internal data, therefore we make this possible by updating the trait
definition with snapshot(&mut self).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Using the Rust Barrier mechanism, this patch forces each virtio device
to acknowledge they've been correctly paused before going further.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of passing only the event type through the handle_event()
callback, we make the trait slightly more generic by providing the
epoll event to each virtio device implementation.
This is particularly useful for vsock as it will need the event set.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Currently any messages generated during the worker thread are not
shown anywhere as the thread is never join()ed on. Instead output the
error immediately.
For now only cover the subset where the work to port to EpollHandler
clashed with the seccomp filtering for virtio devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Migrate to EpollHelper so as to remove code that is duplicated between
multiple virtio devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove the write_config() implementations that only generate a warning
as that is now done at the VirtioDevice level.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Split the generic virtio code (queues and device type) from the
VirtioDevice trait, transport and device implementations.
This also simplifies the feature handling in vhost_user_backend as the
vm-virtio crate is no longer has any features.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
