Use independent bits for storing whether there is a CPU or memory device
changed when reporting changes via ACPI GED interrupt. This prevents a
later notification squashing an earlier one and ensure that hotplugging
both CPU and memory at the same time succeeds.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If there is a GED interrupt and the field indicates that the memory
device has changed triggers a scan of the memory devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The signal handling for vCPU signals has changed in the latest release
so switch to the new API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove the previously hardcoded IRQ number used for the GED device.
Instead allocate the IRQ using the allocator and use that value in the
definition in the ACPI device.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This device provides the ability to notify the kernel via interrupt that
there is some new hotplug activity. The type is determined by reading
from the I/O port.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Since the kvm crates now depend on vmm-sys-util, the bump must be
atomic.
The kvm-bindings and ioctls 0.2.0 and 0.4.0 crates come with a few API
changes, one of them being the use of a kvm_ioctls specific error type.
Porting our code to that type makes for a fairly large diff stat.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Update micro_http create to allow set content type.
Suggested-by: Samuel Ortiz <sameo@linux.intel.com>
Tested-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
We need to rely on the latest kvm-ioctls version to benefit from the
recent addition of unregister_ioevent(), allowing us to detach a
previously registered eventfd to a PIO or MMIO guest address.
Because of this update, we had to modify the current constraint we had
on the vmm-sys-util crate, using ">= 0.1.1" instead of being strictly
tied to "0.2.0".
Once the dependency conflict resolved, this commit took care of fixing
build issues caused by recent modification of kvm-ioctls relying on
EventFd reference instead of RawFd.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based off of crosvm revision b5237bbcf074eb30cf368a138c0835081e747d71
add a CMOS device. This environments that can't use KVM clock to get the
current time (e.g. Windows and EFI.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to avoid introducing a dependency on arch in the devices crate
pass the constant in to the IOAPIC device creation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is necesary to be able easily translate an Interrupt to a
VirtioInterrupt which is already Sync.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The command "cargo build --no-default-features" does not recursively
disable the default features across the workspace. Instead add an acpi
feature at the top-level, making it default, and then make that feature
conditional on all the crate acpi features.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Put the ACPI support behind a feature and ensure that the code compiles
without that feature by adding an extra build to Travis.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add an I/O port "device" to handle requests from the kernel to shutdown
or trigger a reboot, borrowing an I/O used for ACPI on the Q35 platform.
The details of this I/O port are included in the FADT
(SLEEP_STATUS_REG/SLEEP_CONTROL_REG/RESET_REG) with the details of the
value to write in the FADT for reset (RESET_VALUE) and in the DSDT for
shutdown (S5 -> 0x05)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a 2nd EventFd to the VM to control resetting (rebooting) the VM this
supplements the EventFd used for managing shutdown of the VM.
The default behaviour on i8042 or triple-fault based reset is currently
unchanged i.e. it will trigger a shutdown.
In order to support restarting the VM it was necessary to make start()
function take a reference to the config.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Latest clippy version complains about our existing code for the
following reasons:
- trait objects without an explicit `dyn` are deprecated
- `...` range patterns are deprecated
- lint `clippy::const_static_lifetime` has been renamed to
`clippy::redundant_static_lifetimes`
- unnecessary `unsafe` block
- unneeded return statement
All these issues have been fixed through this patch, and rustfmt has
been run to cleanup potential formatting errors due to those changes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Poor performance was observed when booting kernels with "console=ttyS0"
and the serial port disabled.
This change introduces a "null" console output mode and makes it the
default for the serial console. In this case the serial port
is advertised as per other output modes but there is no input and any
output is dropped.
Fixes: #163
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The structure of the vmm-sys-util crate has changed with lots of code
moving to submodules.
This change adjusts the use of the imported structs to reference the
submodules.
Fixes: #145
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Update all dependencies with "cargo upgrade" with the exception of
vmm-sys-utils which needs some extra porting work.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Some refactoring has taken place since the unit tests were written:
The read/write in BusDevice now take a base address and the interrupt
handling code has changed necessitating the need for a new TestInterrupt
struct.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the range base for the IO/MMIO vm exit address, a device with
multiple ranges has all the needed information for resolving which of
its range the exit is coming from
Fixes: #87
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When resolving an IO address to a device, return the range base address,
the offset, and the device itself.
This is needed for devices with multiple IO regions to find out which
region an IO/MMIO exit is coming from.
We also use this change as an opportunity to rename get_device to
resolve as we're doing more than just getting a device.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Partial sync as we're not going to use the the full_addr boolean.
This is based on crosvm commit 44863792.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
BusDevice includes two methods which are only for PCI devices, which should
be as members of PciDevice trait for a better clean high level APIs.
Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
The goal for cloud-hypervisor is to keep the host safe. With this in
mind, we want to emulate as much as possible in userspace instead of
in kernel directly.
The IOAPIC is a good candidate to move from kernel to userspace, which
is why this commit introduces a userspace implementation of the IOAPIC
82093AA based on the documentation:
https://pdos.csail.mit.edu/6.828/2016/readings/ia32/ioapic.pdf
This code is inspired from the files devices/src/ioapic.rs and
devices/src/split_irqchip_common.rs from the crosvm codebase. The
reference version used being 6c1e23eee3065b3f3d6fc4fb992ac9884dbabf68.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit anticipate the future need from having support for both
in kernel and userspace IOAPIC. The way to signal an interrupt from
the serial device will vary depending on the use case, but this should
be independent from the serial implementation itself.
That's why this patch provides a generic trait for the serial device
to call from, so that it can trigger interrupts independently from the
IOAPIC type chosen (in kernel vs userspace).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add the BSD and Apache license.
Make all crosvm references point to the BSD license.
Add the right copyrights and identifier to our VMM code.
Add Intel copyright to the vm-virtio and pci crates.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This is the only clean, or not so dirty way for us to pass a BusDevice
instance to the PciRoot add_device() method.
This is very similar to what crosvm does and we now understand why...
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Introduce emulation of i8042 device to allow the guest to stop the
VM by issuing a reset event.
The device has been copied over from the Crosvm code base, relying on
the commit 0268e26e1ac9e09aa51d733482c5df139cd8d588.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the Firecracker devices crate from commit 9cdb5b2.
It is a trimmed down version compared to the Firecracker one, to remove
a bunch of pulled dependencies (logger, metrics, rate limiter, etc...).
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
