When the hypervisor crate was introduced, a few places that handled
errors were commented out in favor of unwrap, but that's bad practice.
Restore proper error handling in those places in this patch.
We cannot use from_raw_os_error anymore because it is wrapped deep under
hypervisor crate. Create new custom errors instead.
Fixes: e4dee57e81 ("arch, pci, vmm: Initial switch to the hypervisor crate")
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This commit fixes some warnings introduced in the previous
hyperviosr crate PR.Removed some unused variables from arch/aarch64
module.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Start moving the vmm, arch and pci crates to being hypervisor agnostic
by using the hypervisor trait and abstractions. This is not a complete
switch and there are still some remaining KVM dependencies.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Implement the vCPU state getter and setter separately from the initial
KVM Hypervisor trait implementation, mostly for readability purposes.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
For each of the traits we are defining kvm related structures
and add the trait implementation to the structs. For more information
please see the kvm-ioctls and kvm-bindings crate.
This is a standalone implementation that does not include the switch of
the Cloud-Hypervisor vmm and arch crates to it.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
As the only hypervisor that Cloud-Hypervisor supports is KVM, the
Hypervisor trait accomodates for the upcoming KVM implementation.
This trait will be instanciated at build time through hypervisor
specific features, i.e. it's not aiming at run-time selection of
hypervisors for Cloud-Hypervisor.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This VM trait should be implemented by each underlying hypervisor.
Previously created hypervisor object should create the VM based on
already selected hypervisor. This is just the trait definition. For each
of supported hypervisor we need to implement the trait. Later we will
implement this trait for KVM and then Microsoft Hyper-V.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This Vcpu trait should be implemented by each underlying hypervisor.
Previously created hypervisor object should create the VM based on
already selected hypervisor and Vm object should create this vcpu
object based on same hyperviosr. Each of this object should be
referenced by trait object i.e <dyn Vcpu>.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The purpose of this trait is to add support for other hypervisors than
KVM, like e.g. Microsoft Hyper-V.
Further commits will define additional hypervisor related traits like
Vcpu and Vm. Each of the supported hypervisor will need to implement all
traits defined from the hypervisor crate.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Add multiple integration tests with various different CPU topologies and
check that they work as expected.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There are two CPUID leaves for handling CPU topology, 0xb and 0x1f. The
difference between the two is that the 0x1f leaf (Extended Topology
Leaf) supports exposing multiple die packages.
Fixes: #1284
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The extended topology leaf (0x1f) also needs to have the APIC ID (which
is the KVM cpu ID) set. This mirrors the APIC ID set on the 0xb topology
leaf
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than saving the individual parts into the CpuManager save the
full struct as it now also contains the topology data.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This needed to be updated to include specifying the boot and maxmium
vCPUs as well as the newly added topology for those vCPUs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows the user to optionally specify the desired CPU topology. All
parts of the topology must be specified and the product of all parts
must match the maximum vCPUs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 78ca0a942f32140465c67ea4b45d68c52c72d751.
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 6dbe8e021a64ba3742081741a7538cdfd93a102e.
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 78819f35f63f5777a58e3e1e774b3270b32881ed.
The vsock TX buffer flush operation would report inconsistent results,
under specific circumstances.
The flush operation is performed in two steps, since it's dealing with a
ring buffer, an the data to be flushed may wrap around. If the first
step was successful, but the second one failed, the whole flush
operation would report an error, thus causing flow control accounting to
lose track of the bytes that were successfully written by the first
pass.
This commit changes the flush behavior to always report success when
some data has been written to the backing stream.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 2da612a9cdce85c91fb54ab22d950ec6ccc93b27.
Fixed a bug introduced by a271d08f0b1ba0ee82761cd49244b6a8017bcede,
whereby the flow control accouting would be off by a few bytes, for
host-initiated connections.
The connection ack message ("OK <port_num><CR>") was accounted for as
data sent by the guest, so its length was substracted from the total
amount of data the guest was allowed to send.
This commit changes the way this ack message is sent, so that it
bypasses flow control accouting.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 109e631566350867dafa4b16c3919dfd1533eeea.
This commit changes the vsock connection state machine behavior to absorb
any EWOULDBLOCK errors recevied while handling an EPOLLOUT event. Previously,
this condition would lead to immediate connection termination.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 660d18cf7fee5b38c3b1b17a5da6544b9025909d.
Apparently, epoll_wait sometimes yields false EPOLLIN events (i.e. events
follwing which read() would fail with EWOULDBLOCK). This would cause the
vsock connection state machine to terminate connections, since an error
was detected on the underlying Unix socket.
This commit changes the vsock connection state machine code to handle such
erroneous EPOLLIN events by absorbing EWOULDBLOCK read() errors.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 1cc8b8a678eb28b20f5843556bdb7fbb2dfa6284.
Fixed a logical error in the vsock flow control, that would cause credit
update packets to not be sent at the right time.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is d2475773557c82d2abad2fc8bdf69e7d01444109.
Fixed a vsock muxer issue that would cause a connection to be removed
from the RX queue, even though it still had pending RX data.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Gabriel Ionescu <gbi@amazon.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
This patch adds `is_empty` method to VsockPacket to fix the
following clippy error:
error: item `vsock::packet::VsockPacket` has a public `len` method but no corresponding `is_empty` method
--> vm-virtio/src/vsock/packet.rs💯1
|
100 | / impl VsockPacket {
101 | | /// Create the packet wrapper from a TX virtq chain head.
102 | | ///
103 | | /// The chain head is expected to hold valid packet header data. A following packet buffer
... |
334 | | }
335 | | }
| |_^
|
= note: `-D clippy::len-without-is-empty` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#len_without_is_empty
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Currently, not every feature of the cloud-hypervisor is enabled
on AArch64, which means that on AArch64 machines, the
`run_unit_tests.sh` needs to be tailored and some unit test cases
should be run on x86_64 only.
Also this commit fixes the typo and unifies `Arm64` and `AArch64`
in the AArch64 document.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Its test case calls remove unconditionally. Instead of making the test
code call remove conditionally, removing the pci_support dependency
simplifies things -- that function is just a wrapper around HashMap's
remove function anyway.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
cloud-hypervisor: 763.978581807s: ERROR:pci/src/vfio.rs:651 -- failed to remove all guest memory regions from iommu table
when poweroff a vm with vfio device, clh will finally remove all guest memory region from iommu table
with the method unset_dma_map, not method setup_dma_map.
Signed-off-by: LiYa'nan <oliverliyn@gmail.com>
