Depending on the host OS the code for looking up the time for the CMOS
make require extra syscalls to be permitted for the vCPU thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In case the VFIO device does not support MSI or MSI-X, the capabilities
should not be parsed, avoiding the exposure of unsupported capabilities.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make sure to propagate the error coming from VfioDevice when trying to
enable INTx, MSI or MSI-X interrutps.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since INTx is now supported for VFIO PCI devices, there is no more
limitations regarding VFIO, which means the documentation must be
updated accordingly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With all the preliminary work done in the previous commits, we can
update the VFIO implementation to support INTx along with MSI and MSI-X.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Here we are adding the PCI routing table, commonly called _PRT, to the
ACPI DSDT. For simplification reasons, we chose not to implement PCI
links as this involves dynamic decision from the guest OS, which result
in lots of complexity both from an AML perspective and from a device
manager perspective.
That's why the _PRT creates a static list of 32 entries, each assigned
with the IRQ number previously reserved by the device manager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to support INTx for PCI devices, each PCI device must be
assigned an IRQ. This is preliminary work to reserve 8 IRQs which will
be shared across the 32 PCI devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for accessing the legacy interrupt manager from the
function creating a VFIO PCI device, we store it as part of the
DeviceManager, to make it available for all methods.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The DeviceManager already has a hold onto the MSI interrupt manager,
therefore there's no need to pass it through every function. Instead,
let's simplify the code by using the attribute from DeviceManager's
instance.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both GIC and IOAPIC must implement a new method notifier() in order to
provide the caller with an EventFd corresponding to the IRQ it refers
to.
This is needed in anticipation for supporting INTx with VFIO PCI
devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for supporting the notifier function for the legacy
interrupt source group, we need this function to return an EventFd
instead of a reference to this same EventFd.
The reason is we can't return a reference when there's an Arc<Mutex<>>
involved in the call chain.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Swap the last two parameters of guest_mem_{read,write} to be consistent
with other read / write functions.
Use more descriptive parameter names.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This reflects that it generates CPUID state used across all vCPUs.
Further ensure that errors from this function get correctly propagated.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the code for populating the CPUID with KVM HyperV emulation details from
the per-vCPU CPUID handling code to the shared CPUID handling code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the code for populating the CPUID with details of the CPU
identification from the per-vCPU CPUID handling code to the shared CPUID
handling code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Move the code for populating the CPUID with details of the maximum
address space from the per-vCPU CPUID handling code to the shared CPUID
handling code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add the ability for cloud-hypervisor to create, manage and monitor a
pty for serial and/or console I/O from a user. The reasoning for
having cloud-hypervisor create the ptys is so that clients, libvirt
for example, could exit and later re-open the pty without causing I/O
issues. If the clients were responsible for creating the pty, when
they exit the main pty fd would close and cause cloud-hypervisor to
get I/O errors on writes.
Ideally the main and subordinate pty fds would be kept in the main
vmm's Vm structure. However, because the device manager owns parsing
the configuration for the serial and console devices, the information
is instead stored in new fields under the DeviceManager structure
directly.
From there hooking up the main fd is intended to look as close to
handling stdin and stdout on the tty as possible (there is some future
work ahead for perhaps moving support for the pty into the
vmm_sys_utils crate).
The main fd is used for reading user input and writing to output of
the Vm device. The subordinate fd is used to setup raw mode and it is
kept open in order to avoid I/O errors when clients open and close the
pty device.
The ability to handle multiple inputs as part of this change is
intentional. The current code allows serial and console ptys to be
created and both be used as input. There was an implementation gap
though with the queue_input_bytes needing to be modified so the pty
handlers for serial and console could access the methods on the serial
and console structures directly. Without this change only a single
input source could be processed as the console would switch based on
its input type (this is still valid for tty and isn't otherwise
modified).
Signed-off-by: William Douglas <william.r.douglas@gmail.com>
This thread is virtio-net specific, so it is not handled in the common
virtio device code.
The non-vhost implementation resumes the thread itself. Do the same
thing for vhost-user-net.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Use the newly added hugepages_size option if provided by the user to
pick a huge page size when creating the memfd region. If none is
specified use the system default.
Sadly different huge pages cannot be tested by an integration test as
creating a pool of the non-default size cannot be done at runtime
(requires kernel to be booted with certain parameters.)
TETS=Manually tested with a kernel booted with both 1GiB and 2MiB huge
pages (hugepagesz=1G hugepages=1 hugepagesz=2M hugepages=512)
Fixes: #2230
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Including a warning that the user is respsonsible for ensuring that they
have sufficient pages of the specified size.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows the user to use an alternative huge page size otherwise the
default size will be used.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit introduces a new information to the VirtioMemZone structure
in order to know if the memory zone is backed by hugepages.
Based on this new information, the virtio-mem device is now able to
determine if madvise(MADV_DONTNEED) should be performed or not. The
madvise documentation specifies that MADV_DONTNEED advice will fail if
the memory range has been allocated with some hugepages.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Hui Zhu <teawater@antfin.com>
This commit performs some refactoring to make all functions a method
from a specific object, and in particular methods for MemEpollHandler.
The point is to simplify the code to make it more readable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adjust the code to comply better with the virtio-mem specification by
adding some validation for the virtio-mem configuration, but also by
updating the virtio-mem configuration itself.
Nowhere in the virtio-mem specification is stated the usable region size
must be adjusted everytime the plugged size changes. For simplification
reason, and without going against the specification, the usable region
size is now kept static, setting its value to the size of the whole
region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By introducing a ResizeSender object, we avoid having a Resize clone
with a different content than the original Resize object.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
MOV R/RM is a special case of MOVZX, so we generalize the mov_r_rm macro
to make it support both instructions.
Fixes: #2227
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The vhd module is the implementation of the VHD specification, which is
why it is important to unit test it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Let's create a fixed VHD disk file from the existing RAW file thanks to
qemu-img, and create a new integration test to validate that
Cloud-Hypervisor can boot VHD disk image.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the simplified version of the synchronous support for RAW
disk files, the new fixed_vhd_sync module in the block_util crate
introduces the synchronous support for fixed VHD disk files.
With this patch, the fixed VHD support is complete as it is implemented
in both synchronous and asynchronous versions.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Using directly preadv and pwritev, we can simply use a RawFd instead of
a file, and we don't need to use the more complex implementation from
the qcow crate.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
