Since the net_util crate contains the common code needed for processing
the control queue, let's use it and remove the duplicate from inside the
virtio-devices crate.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Moving helpers to the net_util crate since we don't want virtio-net
common code to be split between two places. The net_util crate should be
the only place to host virtio-net common code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Factorize the virtio features and vhost-user protocol features
negotiation through a common function that blk, fs and net
implementations can directly rely on.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make sure the virtio features are set upon device activation. At the
time the device is activated, we know the guest acknowledged the
features, which mean it's safe to set them back to the backend.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio features are negotiated and set at the time the device is
created, hence there's no need to set the features again while going
through the vhost-user setup that is performed upon queue activation.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the control queue is correctly handled by the backend, there's
no need to handle it as well from the VMM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Some refactoring is performed in order to always expect the irqfd to be
provided by VirtioInterrupt trait. In case no irqfd is available, we
simply fail initializing the vhost-user device. This allows for further
simplification since we can assume the interrupt will always be
triggered directly by the vhost-user backend without proxying through
the VMM. This allows for complete removal of the dedicated thread for
both block and net.
vhost-user-fs is a bit more complex as it requires the slave request
protocol feature in order to support DAX. That's why we still need the
VMM to interfere and therefore run a dedicated thread for it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now all crates use edition = "2018" then the majority of the "extern
crate" statements can be removed. Only those for importing macros need
to remain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: all if blocks contain the same code at the start
--> virtio-devices/src/mem.rs:508:9
|
508 | / if plug {
509 | | let handlers =
self.dma_mapping_handlers.lock().unwrap();
|
|_____________________________________________________________________^
|
= note: `-D clippy::branches-sharing-code` implied by `-D warnings`
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#branches_sharing_code
help: consider moving the start statements out like this
|
508 | let handlers = self.dma_mapping_handlers.lock().unwrap();
509 | if plug {
|
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: usage of `contains_key` followed by `insert` on a `BTreeMap`
--> virtio-devices/src/iommu.rs:439:17
|
439 | / if !mappings.contains_key(&domain) {
440 | | mappings.insert(domain, BTreeMap::new());
441 | | }
| |_________________^ help: try this:
`mappings.entry(domain).or_insert_with(|| BTreeMap::new());`
|
= note: `-D clippy::map-entry` implied by `-D warnings`
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#map_entry
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Issue from beta version of clippy:
--> virtio-devices/src/vsock/csm/txbuf.rs:69:34
|
69 | Box::new(unsafe {mem::MaybeUninit::<[u8;
Self::SIZE]>::uninit().assume_init()}));
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `#[deny(clippy::uninit_assumed_init)]` on by default
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#uninit_assumed_init
Fix backported Firecracker a8c9dffad439557081f3435a7819bf89b87870e7.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: reference to packed field is unaligned
--> virtio-devices/src/vhost_user/fs.rs:85:21
|
85 | fs.flags[i].bits() as i32,
| ^^^^^^^^^^^
|
= note: `-D unaligned-references` implied by `-D warnings`
= warning: this was previously accepted by the compiler but is being
phased out; it will become a hard error in a future release!
= note: for more information, see issue #82523
<https://github.com/rust-lang/rust/issues/82523>
= note: fields of packed structs are not properly aligned, and
creating a misaligned reference is undefined behavior (even if that
reference is never dereferenced)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding the support for an OVS vhost-user backend to connect as the
vhost-user client. This means we introduce with this patch a new
option to our `--net` parameter. This option is called 'server' in order
to ask the VMM to run as the server for the vhost-user socket.
Fixes#1745
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In some situations (booting with OVMF) fewer queues will be enabled
therefore we should iterate over the number of enabled queues (as passed
into VirtioDevice::activate()) rather than the number of create tap
devices.
Fixes: #2578
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This allows the guest to reprogram the offload settings and mitigates
issues where the Linux kernel tries to reprogram the queues even when
the feature is not advertised.
Fixes: #2528
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than erroring out and stalling the queue instead report an error
message if the command is invalid and return an error to the guest via
the status field.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Cleanup the control queue handling in preparation for supporting
alternative commands.
Note that this change does not make the MQ handling spec compliant.
According to the specification MQ should only be enabled once the number
of queue pairs the guest would like to use has been specified. The only
improvement towards the specication in this change is correct error
handling if the guest specifies an inappropriate number of queues (out
of range.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Configure the tap offload features to match those that the guest has
acknowledged. The function for converting virtio to tap features came
from crosvm:
4786cee521/devices/src/virtio/net.rs (115)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to support using Versionize for state structures it is necessary
to use simpler, primitive, data types in the state definitions used for
snapshot restore.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Duplicate the fd that is specified in the config so that be used again
after a reboot. When rebooting we destroy all VM state and restore from
the config.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With current serde_derive it is possible to #[derive(Serialize)] on
packed structures if they implement Copy. This allows the removal of the
manual equivalent code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Simplify snapshot & restore code by using generics to specify helper
functions that take / make a Serialize / Deserialize struct
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This patch moves out the actual processing on the TX queue from the
`handle_tx_event()` function into a separate function,
e.g. `process_tx()`. This allows us to resume the TX queue processing
without reading from the TX queue EventFd, which is needed for rate
limiting support.
No functional change.
Signed-off-by: Bo Chen <chen.bo@intel.com>
To support I/O throttling on virt-net devices, we need to use the
'rate_limiter' module from the 'net_utils' crate. Given the
'virtio-devices' crate has dependency on the 'net_utils', we will need
to move the 'rate_limiter' module out of the 'virtio-devices' crate to
avoid circular dependency issue. Considering the 'rate_limiter' is not
virtio specific and could be reused for non virtio devices, we move it
to its own crate.
Signed-off-by: Bo Chen <chen.bo@intel.com>
warning: name `IORegion` contains a capitalized acronym
--> pci/src/configuration.rs:320:5
|
320 | IORegion = 0x01,
| ^^^^^^^^ help: consider making the acronym lowercase, except the initial letter (notice the capitalization): `IoRegion`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: name `ConvertFromUTF8` contains a capitalized acronym
--> virtio-devices/src/vsock/unix/mod.rs:32:5
|
32 | ConvertFromUTF8(std::str::Utf8Error),
| ^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `ConvertFromUtf8`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `TYPE_UNKNOWN` contains a capitalized acronym
--> vm-virtio/src/lib.rs:48:5
|
48 | TYPE_UNKNOWN = 0xFF,
| ^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `Type_Unknown`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In case of the virtio frontend driver doesn't need interupts for
certain queue event, it may explicitly write VIRTIO_MSI_NO_VECTOR
to the virtio common configuration, or it may doesn't configure
the event type vector at all.
This patch initializes both MSI-X configuration vector and queue vector
with VIRTIO_MSI_NO_VECTOR, so that the backend drivers won't trigger
unexpected interrupts to the guest.
Signed-off-by: Zide Chen <zide.chen@intel.com>
Now that virtio devices can be updated with add_memory_region(), there's
no need to keep update_memory() around.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Assuming vhost-user devices support CONFIGURE_MEM_SLOTS protocol
feature, we introduce a new method to the VirtioDevice trait in order to
update one single memory at a time.
In case CONFIGURE_MEM_SLOTS is not supported by the backend (feature not
acked), we fallback onto the current way of updating the memory
mappings, that is with SET_MEM_TABLE.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
On x86_64 architecture, multiple syscalls were missing when shutting
down the vhost-user-net device along with the VM. This was causing the
usual crash related to seccomp filters.
This commit adds these missing syscalls to fix the issue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is no need to get the vring base when resetting the vhost-user
device. This was mostly ignored, but in some cases, it was causing some
actual errors.
A reset must simply be a combination of disabling the vrings along with
the reset of the owner.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Originally, VhostUserSetup is only used by vhost-user-fs. While
vhost-user-blk and vhost-user-net have their own error messages,
we rename VhostUserSetup to VhostUserFsSetup.
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Create two functions for registering/unregistering DMA mapping handlers,
each handler being associated with a VFIO device.
Whenever the plugged_size is modified (which means triggered by the
virtio-mem driver in the guest), the virtio-mem backend is responsible
for updating the DMA mappings related to every VFIO device through the
handler previously provided.
It's important to update the map when the handler is either registered
or unregistered as well, as we don't want to miss some plugged memory
that would have been added before the VFIO device is added to the VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Moving to the latest version of the rust-vmm/vhost crate, before it gets
published on crates.io.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In particular update for the vmm-sys-util upgrade and all the other
dependent packages. This requires an updated forked version of
kvm-bindings (due to updated vfio-ioctls) but allowed the removal of our
forked version of kvm-ioctls.
The changes to the API from kvm-ioctls and vmm-sys-util required some
other minor changes to the code.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The vhost crate from rust-vmm is ready, which is why we do the switch
from the Cloud Hypervisor fork to the upstream crate.
At the same time, we rename the crate from vhost_rs to vhost.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that ExternalDmaMapping is defined in vm-device, let's use it from
there.
This commit also defines the function get_host_address_range() to move
away from the vfio-ioctls dependency.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The main idea behind this commit is to remove all the complexity
associated with TX/RX handling for virtio-net. By using writev() and
readv() syscalls, we could get rid of intermediate buffers for both
queues.
The complexity regarding the TAP registration has been simplified as
well. The RX queue is only processed when some data are ready to be
read from TAP. The event related to the RX queue getting more
descriptors only serves the purpose to register the TAP file if it's not
already.
With all these simplifications, the code is more readable but more
performant as well. We can see an improvement of 10% for a single
queue device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the function can never return an error this is now a clippy failure:
error: this function's return value is unnecessarily wrapped by `Result`
--> virtio-devices/src/watchdog.rs:215:5
|
215 | / fn set_state(&mut self, state: &WatchdogState) -> io::Result<()> {
216 | | self.common.avail_features = state.avail_features;
217 | | self.common.acked_features = state.acked_features;
218 | | // When restoring enable the watchdog if it was previously enabled. We reset the timer
... |
223 | | Ok(())
224 | | }
| |_____^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#unnecessary_wraps
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In anticipation for supporting the notifier function for the legacy
interrupt source group, we need this function to return an EventFd
instead of a reference to this same EventFd.
The reason is we can't return a reference when there's an Arc<Mutex<>>
involved in the call chain.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This thread is virtio-net specific, so it is not handled in the common
virtio device code.
The non-vhost implementation resumes the thread itself. Do the same
thing for vhost-user-net.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This commit introduces a new information to the VirtioMemZone structure
in order to know if the memory zone is backed by hugepages.
Based on this new information, the virtio-mem device is now able to
determine if madvise(MADV_DONTNEED) should be performed or not. The
madvise documentation specifies that MADV_DONTNEED advice will fail if
the memory range has been allocated with some hugepages.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Hui Zhu <teawater@antfin.com>
This commit performs some refactoring to make all functions a method
from a specific object, and in particular methods for MemEpollHandler.
The point is to simplify the code to make it more readable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adjust the code to comply better with the virtio-mem specification by
adding some validation for the virtio-mem configuration, but also by
updating the virtio-mem configuration itself.
Nowhere in the virtio-mem specification is stated the usable region size
must be adjusted everytime the plugged size changes. For simplification
reason, and without going against the specification, the usable region
size is now kept static, setting its value to the size of the whole
region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By introducing a ResizeSender object, we avoid having a Resize clone
with a different content than the original Resize object.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Using directly preadv and pwritev, we can simply use a RawFd instead of
a file, and we don't need to use the more complex implementation from
the qcow crate.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit adds the asynchronous support for fixed VHD disk files.
It introduces FixedVhd as a new ImageType, moving the image type
detection to the block_util crate (instead of qcow crate).
It creates a new vhd module in the block_util crate in order to handle
VHD footer, following the VHD specification.
It creates a new fixed_vhd_async module in the block_util crate to
implement the asynchronous version of fixed VHD disk file. It relies on
io_uring.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch enables multi-queue support for creating virtio-net devices by
accepting multiple TAP fds, e.g. '--net fds=3:7'.
Fixes: #2164
Signed-off-by: Bo Chen <chen.bo@intel.com>
This helper can open a TAP device and configure the interface on it. If
the device needs to be opened multiple times for MQ then it also handles
that correctly.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that BlockIoUring is the only implementation of virtio-block,
handling both synchronous and asynchronous backends based on the
AsyncIo trait, we can rename it to Block.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that both synchronous and asynchronous backends rely on the
asynchronous version of virtio-block (namely BlockIoUring), we can
get rid of the synchronous version (namely Block).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the synchronous QCOW file implementation present in the qcow
crate, we created a new qcow_sync module in block_util that ports this
synchronous implementation to the AsyncIo trait.
The point is to reuse virtio-blk asynchronous implementation for both
synchronous and asynchronous backends.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the synchronous RAW file implementation present in the qcow
crate, we created a new raw_sync module in block_util that ports this
synchronous implementation to the AsyncIo trait.
The point is to reuse virtio-blk asynchronous implementation for both
synchronous and asynchronous backends.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the new DiskFile and AsyncIo traits, the implementation of
asynchronous block support does not have to be tied to io_uring anymore.
Instead, the only thing the virtio-blk implementation knows is that it
is using an asynchronous implementation of the underlying disk file.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Even though the driver can provide fewer queues than those advertised
for some device types their is a minimum number that is required for
operation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It is permissable for the driver to program fewer queues than offered by
the device. Filter the queues so that only the ready ones are included
and check that they have valid addresses configured.
Fixes: #2136
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Don't assume that the number of queues provided match the number of
queues offered. The virtio spec allows the driver to program fewer
queues.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>