We create 2 different interrupt managers for separately handling
creation of legacy and MSI interrupt groups.
Doing so allows us to have a cleaner interrupt manager and IOAPIC
initialization path. It also prepares for an InterruptManager trait
design improvement where we remove the interrupt source type dependency
by associating an interrupt configuration type to the trait.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The existing code taking care of the epoll loop was too restrictive as
it was considering all errors the same. But in case the error is EINTR,
this means the syscall has been interrupted while waiting, and it should
be resumed to wait again.
This patch enforces the parsing of the returned error and prevent the
code from assuming EINTR should be handled as all other errors.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Check the rust formatting rather than just reformatting code on the CI
agent.
Also fix a formatting error that slipped in whilst the cargo fmt check
was not working correctly.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order, among other things, to use the development CLI to run specific
integration tests. For example, to run only the memory_overhead
integration test:
./scripts/dev_cli.sh tests --integration -- memory_overhead
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
A previous version of this change attempted to avoid panicking by not
using .expect() when handling an error when attempting to write to the
log file. Unfortunately the macro eprintln!() that was used to replace
the .expect() also has the behaviour of panicking if stderr cannot be
used. Instead swallow the error completely as if writing to the log has
failed at logging time it is almost certainly the case that any message
about the log would also not be seen.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Since the vhost-user-blk binary will be removed and the newer
release will integrate this block backend into cloud-hypervisor
binary. The block backend code has been added num_queues cmdline
support, we need update multiple queues help info for this
block-backend in the cloud-hypervisor.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
We measure the memory overhead that the VMM process adds to the guest VM
and compare it with a maximum acceptable limit. The test is run against
a simple VM, running 1 vCPU and 512MB of RAM. Although this is not by
any mean a comprehensive VMM overhead measurement, it will allow us to
detect when and if any PR makes our code cross an arbitrary memory
overhead threshold.
Fixes: #64
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
As this can happen during the running of the VMM we should be very
careful not to panic() as that can lead to a thread being used by the VM
disappearing.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
A reference to the VmFd is stored on the AddressManager so it is not
necessary to pass in the VmInfo into all methods that need it as it can
be obtained from the AddressManager.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The DeviceManager has a reference to the MemoryManager so use that to
get the GuestMemoryMmap rather than the version stored in the VmInfo
struct.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove the use of vm_info in methods to get the config and instead use
the config stored on the DeviceManager itself.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove some in/out parameters and instead rely on them as members of the
&mut self parameter. This prepares the way to more easily store state on
the DeviceManager.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove some in/out parameters and instead rely on them as members of the
&mut self parameter. A follow-up commit will change the callee functions
that create the devices themselves.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Modify these functions to take an &mut self and become methods on
DeviceManager. This allows the removal of some in/out parameters and
leads the way to further refactoring and simplification.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MemoryManager should only be included on the I/O bus when doing ACPI
builds as that is the only time it will be interrogated.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently the MemoryManager is only used on the ACPI code paths after
the DeviceManager has been created. This will change in a future commit
as part of the refactoring so for now always include it but name it with
underscore prefix to indicate it might not always be used.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding the num_queues parameter for vhost-user-blk backend, which
can enable MQ support in the backend.
This patch has enabled the MQ support from handle_event, and the
vhost-user-backend crate will enable multiple threads to call this
handle_event to handle read/write operations.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
The previous code only support one queue, and we need
to support MQ in vhost user block device. This patch
can work with SPDK with MQ setting.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
We don't need to force the cargo-audit install, we can check if it's
already available instead and install if it's not.
Also, since we now have workspaces properly setup, we can call directly
into cargo fmt and avoid calling into find magic incantation.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The script is a development tool that runs all commands in a dedicated
container. This allows for containerized, isolated and reproducible
builds and CI runs.
The script supports the following command:
* build: Build Cloud Hypervisor binaries (debug and release)
* build-container: Build the container used by the script
* tests: Run unit, cargo and integration tests
$ ./scripts/dev_cli.sh help
Cloud Hypervisor dev_cli.sh
Usage: dev_cli.sh <command> [<command args>]
Available commands:
build [--debug|--release] [-- [<cargo args>]]
Build the Cloud Hypervisor binaries.
--debug Build the debug binaries. This is the default.
--release Build the release binaries.
tests [--unit|--cargo|--all]
Run the Cloud Hypervisor tests.
--unit Run the unit tests.
--cargo Run the cargo tests.
--integration Run the integration tests.
--all Run all tests.
build-container [--type]
Build the Cloud Hypervisor container.
--dev Build dev container. This is the default.
help
Display this help message.
Fixes: #682Fixes: #684
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Because of the new set of patches related to virtio-iommu allowing only
for the topology to be described through virtio configuration, this
patch updates the kernel branch and the kernel configuration our CI
relies on.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that devices attached to the virtual IOMMU are described through
virtio configuration, there is no need for the DeviceManager to store
the list of IDs for all these devices. Instead, things are handled
locally when PCI devices are being added.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of relying on the ACPI tables to describe the devices attached
to the virtual IOMMU, let's use the virtio topology, as the ACPI support
is getting deprecated.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the new structures previously introduced, the new topology
feature is being fully implemented through this commit. This allows
the description of the devices attached to the virtual IOMMU, which
is why a new function attach_devices() has been introduced. It gives
the virtual IOMMU device the full list of devices which must be attached
to it, letting the device share this information through its virtio
configuration.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio-iommu device defines a new virtio feature allowing the
topology to be discovered fully through virtio configuration.
By topology, it means describing the devices attached to the virtual
IOMMU. This is currently managed through ACPI with IORT and VIOT table,
but this is another way of describing it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio capability VIRTIO_PCI_CAP_PCI_CFG is exposed through the
device's PCI config space the same way other virtio-pci capabilities
are exposed.
The main and important difference is that this specific capability is
designed as a way for the guest to access virtio capabilities without
mapping the PCI BAR. This is very rarely used, but it can be useful when
it is too early for the guest to be able to map the BARs.
One thing to note, this special feature MUST be implemented, based on
the virtio specification.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to anticipate the need to support more features related to the
access of a device's PCI config space, this commits changes the self
reference in the function read_config_register() to be mutable.
This also brings some more flexibility for any implementation of the
PciDevice trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
