The virtio specification defines a device can be reset, which was not
supported by this virtio-console implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind it
to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As of commit 2b94334a, Firecracker includes all the changes we need.
We can now switch to using it instead of carrying a copy.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We used to have errors definitions spread across vmm, vm, api,
and http.
We now have a cleaner separation: All API routines only return an
ApiResult. All VM operations, including the VMM wrappers, return a
VmResult. This makes it easier to carry errors up to the HTTP caller.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to support further use cases where a VM configuration could be
modified through the HTTP API, we only store the passed VM config when
being asked to create a VM. The actual creation will happen when booting
a new config for the first time.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We use the serde crate to serialize and deserialize the VmVConfig
structure. This structure will be passed from the HTTP API caller as a
JSON payload and we need to deserialize it into a VmConfig.
For a convenient use of the HTTP API, we also provide Default traits
implementations for some of the VmConfig fields (vCPUs, memory, etc...).
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The linux_loader crate Cmdline struct is not serializable.
Instead of forcing the upstream create to carry a serde dependency, we
simply use a String for the passed command line and build the actual
CmdLine when we need it (in vm::new()).
Also, the cmdline offset is not a configuration knob, so we remove it.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
They point to a vm_virtio structure (VhostUserConfig) and in order to
make the whole config serializable (through the serde crate for
example), we'd have to add a serde dependency to the vm_virtio crate.
Instead we use a local, serializable structure and convert it to
VhostUserConfig from the DeviceManager code.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The kernel path was the only mandatory command line option.
With the addition of the --api-socket option, we can run without a
kernel path and get it later through the API.
Since we can end up with VM configurations that are no longer valid by
default, we need to provide a validation check for it. For now, if the
kernel path is not defined, the VM configuration is invalid.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The Cloud Hyper HTTP server runs a synchronous, multi-threaded
loop that receives HTTP requests and tries to call the corresponding
endpoint handlers for the requests URIs.
An endpoint handler will parse the HTTP request and potentially
translate it into and IPC request. The handler holds an notifier and an
mspc Sender for respectively notifying and sending the IPC payload to
the VMM API server. The handler then waits for an API server response
and translate it back into an HTTP response.
The HTTP server is responsible for sending the reponse back to the
caller.
The HTTP server uses a static routes hash table that maps URIs to
endpoint handlers.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The cloud-hypervisor API uses HTTP as a transport and is accessible
through a local UNIX socket.
The API root path is /api/v1 and is a collection of RPC-style methods.
All methods are static, unlike typical REST APIs. Variable (e.g. device
IDs) are passed through the request body.
Fixes: #244
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Based off of crosvm revision b5237bbcf074eb30cf368a138c0835081e747d71
add a CMOS device. This environments that can't use KVM clock to get the
current time (e.g. Windows and EFI.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Refactor the PCI datastructures to move the device ownership to a PciBus
struct. This PciBus struct can then be used by both a PciConfigIo and
PciConfigMmio in order to expose the configuration space via both IO
port and also via MMIO for PCI MMCONFIG.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to avoid introducing a dependency on arch in the devices crate
pass the constant in to the IOAPIC device creation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Using the existing layout module start documenting the major regions of
RAM and those areas that are reserved. Some of the constants have also
been renamed to be more consistent and some functions that returned
constant variables have been replaced.
Future commits will move more constants into this file to make it the
canonical source of information about the memory layout.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We now start the main VMM thread, which will be listening for VM and IPC
related events.
In order to start the configured VM, we no longer directly call the VM
API but we use the IPC instead, to first create and then start a VM.
Fixes: #303
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Based on the newly defined Cloud Hypervisor IPC, those helpers send
VmCreate and VmStart requests respectively. This will be used by the
main thread to create and start a VM based on the CLI parameters.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This starts the main, single VMM thread, which:
1. Creates the VMM instance
2. Starts the VMM control loop
3. Manages the VMM control loop exits for handling resets and shutdowns.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Unlike the Vmm structure we removed with commit bdfd1a3f, this new one
is really meant to represent the VM monitoring/management object.
For that, we implement a control loop that will replace the one that's
currently embedded within the Vm structure itself.
This will allow us to decouple the VM lifecycle management from the VM
object itself, by having a constantly running VMM control loop.
Besides the VM specific events (exit, reset, stdin for now), the VMM
control loop also handles all the Cloud Hypervisor IPC requests.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The VMM thread and control loop will be the sole consumer of the
EpollContext and EpollDispatch API, so let's move it to lib.rs.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Cloud Hypervisor IPC is a simple, mpsc based protocol for threads to
send command to the furture VMM thread. This patch adds the API
definition for that IPC, which will be used by both the main thread
to e.g. start a new VM based on the CLI arguments and the future HTTP
server to relay external requests received from a local Unix domain
socket.
We are moving it to its own "api" module because this is where the
external API (HTTP based) will also be implemented.
The VMM thread will be listening for IPC requests from an mpsc receiver,
process them and send a response back through another mpsc channel.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
As we're going to move the control loop to the VMM thread, the exit and
reset EventFds are no longer going to be owned by the VM.
We pass a copy of them when creating the Vm instead.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to handle the VM STDIN stream from a separate VMM thread
without having to export the DeviceManager, we simply add a console
handling method to the Vm structure.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to transfer the control loop to a separate VMM thread, we want
to shrink the VM control loop to a bare minimum.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Once passed to the VM creation routine, a VmConfig structure is
immutable. We can simply carry a Arc of it instead of a reference.
This also allows us to remove any lifetime bound from our VM.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The Vmm structure is just a placeholder for the KVM instance. We can
create it directly from the VM creation routine instead.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We can integrate the kernel loading into the VM start method.
The VM start flow is then: Vm::new() -> vm.start(), which feels more
natural.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Convert Path to PathBuf and remove the associated lifetime.
Now we can remove the VmConfig associated lifetime.
Fixes#298
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
