Remove clippy:all and update it with correct clippy lint,
so that it gives proper information.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
Between musl and glibc there is a difference in the signature of the
ioctl libc function. Use an anonymous cast to force the type coversion.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
According the std docs implementing From<..> is preferred since it
gives you Into<..> for free where the reverse isn’t true.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
Add a Default implementation that delegates to new, so that clippy
can be removed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
Fix these warnings:
SC2086 info: Double quote to prevent globbing and word splitting.
DL3047 info: Avoid use of wget without progress bar. Use `wget --progress=dot:giga <url>`. Or consider using `-q` or `-nv` (shorthands for `--quiet` or `--no-verbose`).
SC2006 style: Use $(...) notation instead of legacy backticks `...`.
Ignore these warning cause they break the build or they do not apply:
DL3008 warning: Pin versions in apt get install. Instead of `apt-get install <package>` use `apt-get install <package>=<version>`
DL3003 warning: Use WORKDIR to switch to a directory
SC2016 info: Expressions don't expand in single quotes, use double quotes for that.
SC2046 warning: Quote this to prevent word splitting.
DL4006 warning: Set the SHELL option -o pipefail before RUN with a pipe in it. If you are using /bin/sh in an alpine image or if your shell is symlinked to busybox then consider explicitly setting your SHELL to /bin/ash, or disable this check
SC2155 warning: Declare and assign separately to avoid masking return values.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
hadolint error:
DL3015 info: Avoid additional packages by specifying `--no-install-recommends`
Add required packages ca-certificates unzip iproute2 dbus
Without these packages build or integration tests fail if
--no-install-recommends is specified. Previously these packages were
installed as part of recommended dependency packages.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Setting environment variable
DEBIAN_FRONTEND=noninteractive
Makes unnecessary setting it in all apt-get install commands
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Some parts of Dockerfile are indented with spaces others with tabs.
Unify indentation to use spaces.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Test was failing due to regression caused by commit
d5558aea2a
Failing command:
sudo /mnt/ch-remote --api-socket /tmp/ch_api.sock resize --memory=1073741824"
Fixes#5190
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
This does the same thing as df2a7c17 ("vmm: Ignore and warn TAP FDs
sent via the HTTP request body"), but for the vm.create endpoint,
which also previously would accept file descriptors in the body, and
try to use whatever fd occupied that number as a TAP device.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Port of df2a7c17 ("vmm: Ignore and warn TAP FDs sent via the HTTP
request body"), but for the vm.create endpoint, which would previously
accept file descriptors in the body, and try to use whatever fd
occupied that number as a TAP device.
Since I had to move the wrapping of the net config in an Arc until
after it was modified, I made the same change to all other endpoints,
so the style stays consistent.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Using the data from sysfs forward the host host cache layout to the
guest using the FDT tables.
TEST=The host cache layout (from sysfs) can be seen in inside the guest
using lscpu.
Signed-off-by: zhongbingnan <zhongbingnan@bytedance.com>
Currently, vfio device fails to initialize as the msix-cap region in BAR
is mapped as RW region.
To resolve the initialization issue, this commit avoids mapping the
msix-cap region in the BAR. However, this solution introduces another
problem where aligning the msix table offset in the BAR to the page
size may cause overlap with the MMIO RW region, leading to reduced
performance. By enlarging the entire region in the BAR and relocating
the msix table to achieve page size alignment, this problem can be
overcomed effectively.
Fixes: #5292
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
To avoid code duplication extract page related functions to their
own module and add utility functions for manipulating addresses
related to page sizes
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This patch clarifies the assumptions we have regarding the guest address
space layout while creating memory mapping in E820 on x86_64 and fdt on
aarch64. It also explicitly checks on these assumptions and report
errors if these assumptions do not hold.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This commit renames `ram_region_sub_size` to `ram_region_available_size`
and make its value align down to the default page size or hugepage
size of the current memory zone, which can prevent the memory zone from
being split into misaligned parts. And if the available size of ram
region is zero, this region will be marked as consumed even it has
unused space.
Note that there is two methods to use hugepages.
1. Specify `hugepages` for `memory` or `memory-zone`, if the
`hugepage_size` is not specified, the value can be got by `statfs`
for `/dev/hugepages`.
2. Specify a `file` in hugetlbfs for `memory-zone`, the hugepage size
can also be got by `statfs` for the file.
The value for alignment will be the hugepage size if this memory zone
is using hugepages, otherwise the value will be default page size of
system.
Fixes: #5463
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
The previous `arch_memory_regions` function will provide some memory
regions with the specified memory size and fill all the previous
regions before using the next one, but sometimes there may be no need
to fill up the previous one, e.g., the previous one should be aligned
with hugepage size.
This commit make `arch_memory_regions` function not take any
parameters and return the max available regions, the memory manager
can use them on demand.
Fixes: #5463
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
The original codes did not consider that the previous memory region
might not be full and always set it to the maximum size.
This commit fixes this problem by creating memory mappings based on
the actual memory details in both E820 on x86_64 and fdt on aarch64.
Fixes: #5463
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
The device manager will set tty or pty to raw mode, all the `\n` will
be LF without CR, which makes the output difficult to read.
This commit solves it by using `write` with `\r\n` instead of
`writeln`, which can print CR and LF explicitly.
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
Remove "enum_variant_names" clippy. Enumeration variant names should
specify their variant, not repeat the enumeration name.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
Download firmware and focal image to fix issue of running vfio tests
with empty worlkoads directory:
$ scripts/dev_cli.sh tests --integration-vfio
+ cp /root/workloads/focal-server-cloudimg-amd64-custom-20210609-0.raw /root/workloads/vfio
cp: cannot stat '/root/workloads/focal-server-cloudimg-amd64-custom-20210609-0.raw': No such file or directory
+ cp /root/workloads/hypervisor-fw /root/workloads/vfio
cp: cannot stat '/root/workloads/hypervisor-fw': No such file or directory
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Program the APIC ID (CPUID leaf 0x1 EBX) with the CPU id. This resolves
an issue where the EDKII firmware expects the APIC ID to vary per-CPU.
Fixes: #5475
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Script `create-cloud-init.sh" uses the same cloud init data as the the CI
but this means it is somewhat overloaded with unhelpful network configuration
entries and scripts that are only needed for the CI.
For local testing data kept in test_data/cloud-init/ubuntu/local folder.
This contains minimum configuration data for user to test it locally.
Script assigns default IP address using "network-config" details
with --net "tap=" option. The default network interface will be "ens4".
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@intel.com>
