In order to reduce the amount of times VMs are being started through
integration tests, this commit consolidates very similar tests related
to virtio-blk into a single one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Just add a new integration test to verify that multiqueue support is
correctly supported and that we can find the right amount of queues in
the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The number of queues and the size of each queue were not configurable.
In anticipation for adding multiqueue support, this commit introduces
some new parameters to let the user decide about the number of queues
and the queue size.
Note that the default values for each of these parameters are identical
to the default values used for vhost-user-blk, that is 1 for the number
of queues and 128 for the queue size.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add explicit exclusions with --net-backend from --block-backend (and
vice-versa.) And also with "--kernel" as this is the option for "VM boot" that is never optional.
Ideally we would conflcit the backend arguments against the "vm-group"
however this does not work as it includes some arguments that have a
default value set and thus clap thinks those arguments are always
provided. Conflicting with "--kernel" is thus a reasonable compromise.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Generate the VM params until after the logging has been enabled. This
will make it possible to reuse the logging for vhost backends.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Previous commit added 'direct' support for virtio-blk to be able to
open files backing disk images with O_DIRECT, so add an integration
test for this new feature.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Previous commit added 'readonly' support for virtio-blk to be able to
configure read-only devices, so add an integration test for this new
feature.
Signed-off-by: Sergio Lopez <slp@redhat.com>
This test is a variant of test_boot_vhost_user_blk(), named
test_boot_vhost_user_blk_direct(), that instances the vhost-user-blk
daemon with 'direct=true', to test this recently introduced feature
for opening files with O_DIRECT.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Update queue number with 4 to verify if vhost-user-net device
and backend could work well with multiple queue.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
There are two new options num_queues and queue_size defined for
virtio-net, add them in test_valid_vm_config_net which is used
to validate that both the CLI and the OpenAPI will generate the
same configuration.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Add num_queues and queue_size for virtio-net device to make them configurable,
while add the associated options in command line.
Update cloud-hypervisor.yaml with the new options for NetConfig.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
This specifies how much address space should be reserved for hotplugging
of RAM. This space is reserved by adding move the start of the device
area by the desired amount.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the latest version of virtiofsd, some changes have been made
to the socket path parameter. This needs to be updated in the cloud
hypervisor codebase, so that our CI keeps running correctly.
Fixes#611
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The cache= option from the virtiofsd backend is meant to be used
depending on how the user wants to use the guest page cache. For most
use cases, we want to bypass the guest page cache to reduce the guest
memory footprint, which is why "cache=none" should be the default.
"cache=always" is the other option when the user wants to do something
specific by using the guest page cache, but should not be the default
anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With latest kernel, virtio-fs mount command has been simplified, and
this needs to be applied everywhere in our tests and documentation.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because we don't always reach the expected footprint improvements with
KSM, let's review the numbers. By reducing the expectations and
increasing the amount of pages to scan, this should stabilize the CI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch is to check if block device is readonly
when backend set readonly=true.
The lsblk command can show the RO value in the guest.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
The goal here is to ensure that CLI and OpenAPI both behave as closely
as possible, and also that they behave as expected.
Leveraging the reorganization of the code, we can now compare two
VmConfig structures generated from one CLI entry on one side, and from
an OpenAPI entry (JSON payload) on the other side.
Fixes#535
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
On our CI the /tmp filesystem is mounted as tmpfs and this is the
location where the test disk images are located. When the CI worker
nodes have less memory and fewer CPUs the tmpfs fills up as the tests
run in parallel.
Introduce a mechanism to reduce the parallelism of the tests based on
starvation of the tmpfs disk availability.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By default, and in order to avoid falling into the legacy CLI usage, the
CPU argument should at least include "boot=" to define the number of
CPUs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to validate that multiple devices can be passed through and
they are still fully functional, this patch extends the existing VFIO
test to pass a second virtio-net device, and verifies that both
interfaces are functional by ssh'ing into each network interface.
Fixes#503
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The easiest way to detect if the kernel is willing to accept hotplug
vCPUs is to check the dmesg output.
Switch the test to bionic as the Clear Cloud image lacks "dmesg."
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to validate the new virtio-fs daemon written in Rust is
behaving correctly, a new integration test has been added. Important to
note that for now, only a test with cache=none and dax=off can be added
since the daemon does not support shared memory region yet.
The long term goal being to replace virtiofsd with vhost_user_daemon
once it will reach parity regarding the supported features.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of using bash and awk, using Rust allows us to retrieve
information about a VM process with the right permissions as we are not
forced to spawn a new child process.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The test validates that when the mergeable option is enabled, the
resulting PSS for two instances of cloud-hypervisor is lower than two
instances not using the mergeable flag.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the user indicate if the persistent memory pages should
be marked as mergeable or not, a new option is being introduced.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the user indicate if the guest RAM pages should be
marked as mergeable or not, a new option is being introduced.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When vmm.ping give a response, we expect get the version from
the VMM not the vmm create
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
vmm.ping will help to check if http API server is up and
running.
This also removes the vmm.info endpoint.
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
