Because we don't always reach the expected footprint improvements with
KSM, let's review the numbers. By reducing the expectations and
increasing the amount of pages to scan, this should stabilize the CI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch is to check if block device is readonly
when backend set readonly=true.
The lsblk command can show the RO value in the guest.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
The current backend only support rw, and we also need
add readonly support.
The new command:
vhost_user_blk \
--backend "image=/home/test.img, \
sock=/home/path/vhost.socket, \
readonly=true"
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
The goal here is to ensure that CLI and OpenAPI both behave as closely
as possible, and also that they behave as expected.
Leveraging the reorganization of the code, we can now compare two
VmConfig structures generated from one CLI entry on one side, and from
an OpenAPI entry (JSON payload) on the other side.
Fixes#535
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
On our CI the /tmp filesystem is mounted as tmpfs and this is the
location where the test disk images are located. When the CI worker
nodes have less memory and fewer CPUs the tmpfs fills up as the tests
run in parallel.
Introduce a mechanism to reduce the parallelism of the tests based on
starvation of the tmpfs disk availability.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By default, and in order to avoid falling into the legacy CLI usage, the
CPU argument should at least include "boot=" to define the number of
CPUs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to validate that multiple devices can be passed through and
they are still fully functional, this patch extends the existing VFIO
test to pass a second virtio-net device, and verifies that both
interfaces are functional by ssh'ing into each network interface.
Fixes#503
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The easiest way to detect if the kernel is willing to accept hotplug
vCPUs is to check the dmesg output.
Switch the test to bionic as the Clear Cloud image lacks "dmesg."
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to validate the new virtio-fs daemon written in Rust is
behaving correctly, a new integration test has been added. Important to
note that for now, only a test with cache=none and dax=off can be added
since the daemon does not support shared memory region yet.
The long term goal being to replace virtiofsd with vhost_user_daemon
once it will reach parity regarding the supported features.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because the vhost_user_backend crate needs some changes to support
moving the process to a different mount namespace and perform a pivot
root, it is not possible to change '/' to the given shared directory.
This commit, as a temporary measure, let the code point at the given
shared directory.
The long term solution is to perform the mount namespace change and the
pivot root as this will provide greater security.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch implements a vhost-user-fs daemon based on Rust. It only
supports communicating through the virtqueues. The support for the
shared memory region associated with DAX will be added later.
It relies on all the code copied over from the crosvm repository, based
on the commit 961461350c0b6824e5f20655031bf6c6bf6b7c30.
It also relies on the vhost_user_backend crate, limiting the amount of
code needed to get this daemon up and running.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of using bash and awk, using Rust allows us to retrieve
information about a VM process with the right permissions as we are not
forced to spawn a new child process.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The test validates that when the mergeable option is enabled, the
resulting PSS for two instances of cloud-hypervisor is lower than two
instances not using the mergeable flag.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the user indicate if the persistent memory pages should
be marked as mergeable or not, a new option is being introduced.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the user indicate if the guest RAM pages should be
marked as mergeable or not, a new option is being introduced.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When vmm.ping give a response, we expect get the version from
the VMM not the vmm create
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
vmm.ping will help to check if http API server is up and
running.
This also removes the vmm.info endpoint.
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
Use the new vhost-user-blk backend for the integration tests,
eliminating the need for building vubd using the implementation in
QEMU.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Create a vhost-user-blk backend using vhost-user-backend and following
the conventions established by the existing vhost-user-net
implementation.
This backend is based on https://github.com/slp/vhost-user-backend,
but a bit simplified, making it closer to the original implementation
in Firecracker. The main features missing are EVENT_IDX, support for
asynchronous I/O and multiqueue, but it's still fully functional and
provides a good starting point for evolving it into a more complete
implementation.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Extend VhostUserBackend trait with protocol_features(), so device
backend implementations can freely define which protocol features they
want to support.
Signed-off-by: Sergio Lopez <slp@redhat.com>
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
two extra bundles added to it.
First bundle is sysadmin-basic to include utility like netcat, and the
second bundle is iperf, adding the iperf binary to the image.
The image is 2G in size.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When VFIO devices are created and if the device is attached to the
virtual IOMMU, the ExternalDmaMapping trait implementation is created
and associated with the device. The idea is to build a hash map of
device IDs with their associated trait implementation.
This hash map is provided to the virtual IOMMU device so that it knows
how to properly trigger external mappings associated with VFIO devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a VFIO device should be attached to the virtual
IOMMU or not. That's why we introduce an extra option "iommu" with the
value "on" or "off". By default, the device is not attached, which means
"iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Clean up the error handling and ensure that where possible errors are
propagated. Make use of std::convert::From in order to translate error
types.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Simplify the check for the unusual situation where the memory is not
configured by using .ok_or() on the option to convert it to a result.
This cleans up a bunch of extra indentation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Remove messages that are left over from the development of the project
that represent normal operation for the backend. This cleans up the
console output and improves performance.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We pause a VM from the API, then SSH'ing into it should fail.
After resuming, SSH'ing should work again.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Because the L2 VM running in the VFIO integration test is actually
running as L3 (since the CI runs in a VM), it can take quite some
time for this VM to boot.
The way to solve this issue is to extend the sleep time before to try
communicating with the L2 VM, but also to speed up the boot time by
using virtio-console instead of serial. We suspect the use of serial,
implying PIO VM exits for each character on the serial port is quite
expensive compared to the paravirtualized console.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Azure virtual machines can have private IPs in the 172.16.x.x range,
causing some issues with the VFIO test. By using 172.17.x.x for this
test, we avoid IP conflicts.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that our custom kernel includes all the patches for the full support
of virtio-iommu, we can go one step further by attaching the virtio-net
device to the virtual IOMMU and use it to SSH some commands validating
both disks and the network card are isolated into their own IOMMU group.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that cloud-hypervisor can expose a virtual IOMMU to its guest VM,
the integration test validating the VFIO support with virtio-net can be
updated to use cloud-hypervisor exclusively.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-vsock device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-console device should be attached to
this virtual IOMMU or not. That's why we introduce an extra option
"iommu" with the value "on" or "off". By default, the device is not
attached, which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-pmem device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-rng device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-net device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-blk device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
One side effect of this new option is that we had to introduce a new
option for the disk path, simply called "path=".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We use the serde crate to serialize and deserialize the VmVConfig
structure. This structure will be passed from the HTTP API caller as a
JSON payload and we need to deserialize it into a VmConfig.
For a convenient use of the HTTP API, we also provide Default traits
implementations for some of the VmConfig fields (vCPUs, memory, etc...).
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The kernel path was the only mandatory command line option.
With the addition of the --api-socket option, we can run without a
kernel path and get it later through the API.
Since we can end up with VM configurations that are no longer valid by
default, we need to provide a validation check for it. For now, if the
kernel path is not defined, the VM configuration is invalid.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The API server will unconditionally run through a UNIX domain socket
which default path is /run/user/<uid>/cloud-hypervisor.<pid>.
The --api-socket command line option allows to override that default
value with some custom socket path.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
With the API server socket option, we will be able to support a model
where the user can start cloud-hypervisor with no options or an
alternative API server socket path. In this case, we don't want to try
to start a new guest VM, and for that we need to know if the user has
set any VM configuration at all. Grouping all VM configuration specific
options together is one way to be able to know about it.
If the user has not set any VM configuration, we only start the API
server. If it has set anything, we will verify that the overall
configuration is valid and will implicitly convert that configuration
into a request to the API server.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
An integration test relying on the new vhost-user-net backend now
replaces the previous test using the QEMU test backend. This allows
us to avoid building the QEMU backend, and we now really exercise the
vhost-user-net implementation as it is used for the ssh communication
in this test.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Create vhost-user-net backend with Tap interface, to offload network
transaction from cloud-hypervisor. The goal is to provide flexibility
about the backend being in use, but also more security as it will allow
users to isolate the backend with different security profiles since it
will run as a dedicated process on the host.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We now start the main VMM thread, which will be listening for VM and IPC
related events.
In order to start the configured VM, we no longer directly call the VM
API but we use the IPC instead, to first create and then start a VM.
Fixes: #303
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Unlike the Vmm structure we removed with commit bdfd1a3f, this new one
is really meant to represent the VM monitoring/management object.
For that, we implement a control loop that will replace the one that's
currently embedded within the Vm structure itself.
This will allow us to decouple the VM lifecycle management from the VM
object itself, by having a constantly running VMM control loop.
Besides the VM specific events (exit, reset, stdin for now), the VMM
control loop also handles all the Cloud Hypervisor IPC requests.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Once passed to the VM creation routine, a VmConfig structure is
immutable. We can simply carry a Arc of it instead of a reference.
This also allows us to remove any lifetime bound from our VM.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The Vmm structure is just a placeholder for the KVM instance. We can
create it directly from the VM creation routine instead.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Now that vhost-user has been fixed regarding size of the virtqueues,
booting a VM with the firmware from a vhost-user-blk backend actually
works. That's why this commit updates the previously introduced
integration test to make it use the firmware instead of direct kernel
boot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit extends the existing integration test related to
vhost-user-blk by validating the block image contains one file
"foo" containing "bar".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Currently we need use backend device from Qemu to test vhost-user-blk
device. Once the rust backend is ready, we will replace it.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Now that we have expanded our address space we should add automated
testing to try VMs that use a large amount of RAM.
As the hypervisor does an anonymous mmap() for the backing of memory and
during a typical test boot the guest will not touch it all it should be
possible to test large RAM VMs even if that exceeds the RAM of the host
machine.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Label tests that definitely can't function with virtio-mmio (because
they use the firmware) and within those that can be used mark individual
assertions that will no longer hold (around PCI.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This patch extends the current set of integration tests to correctly
validate that virtio-vsock is functional. It establishes a communication
between host and guest relying on the newly integrated vsock device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Rely on the newly generated Clear Linux image for the integration
testing of cloud-hypervisor. The image has been generated using the
Clear Linux clr-installer tooling, which means it is in compliance with
the Clear Linux licensing.
This new image contains one more bundle that was not part of the default
cloudguest image. This bundle is basic-sysadmin, and contains both nc
and socat utilities.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The goal here is to decouple the Guest instance from the ssh connection
to send some commands to the guest. The reason being to allow ssh
commands to be issued from a different thread, which can be useful to
wait for the end of a command with a thread.join().
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As part of the reboot test check that the binary cleanly terminated
after the subsequent shutdown.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The new flag vsock is meant to be used in order to create a VM with a
virtio-vsock device attached to it. Two parameters are needed with this
device, "cid" representing the guest context ID, and "sock" representing
the UNIX socket path which can be accessed from the host.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The default number of MSI-X vector allocated was 2, which is the minimum
defined by the virtio specification. The reason for this minimum is that
virtio needs at least one interrupt to signal that configuration changed
and at least one to specify something happened regarding the virtqueues.
But this current implementation is not optimal because our VMM supports
as many MSI-X vectors as allowed by the MSI-X specification (2048 max).
For that reason, the current patch relies on the number of virtqueues
needed by the virtio device to determine the right amount of MSI-X
vectors needed. It's important not to forget the dedicated vector for
any configuration change too.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Being able to reboot requires us to identify all the resources we are
leaking and cleaning those up before we can enable reboot. For now if
the user requests a reboot then shutdown instead.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that we have ACPI shutdown support "reboot" will actually reboot the
VM rather than trigger the VMM to exit.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The virtiofsd daemon takes a bit of time creating and listening on the
socket. By adding 10s timeout, we make sure the vhost-user socket has
been properly created before the VMM tries to connect to it.
Also, the daemon needs cap_dac_override capabilities to access debugfs
filesystem.
Last thing, both virtio-fs and virtio-pmem tests were slightly different
from the others since they were not explicitly killing cloud-hypervisor
and virtiofsd processes once the test was done.
Fixes#182
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
panic()ing after a panic() has already been recovered by the credibility
test system (i.e. after an aver! has failed) results in an abort which
triggers SIGILL.
Adjust the SSH based commands to generate a Result<...,Error> which we
then either propagate through the test block. Or if the function is
directly being evaluated in an aver! macro call .unwrap_with_default()
(or .unwrap_or() in the case where the default would be wrong.)
See #182
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When virtio-fs is being tested through the integration tests, there is
one specific test where DAX and cache region are disabled. In this case
the virtiofsd daemon should be used with the correct option cache=none
instead of cache=always.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Latest clippy version complains about our existing code for the
following reasons:
- trait objects without an explicit `dyn` are deprecated
- `...` range patterns are deprecated
- lint `clippy::const_static_lifetime` has been renamed to
`clippy::redundant_static_lifetimes`
- unnecessary `unsafe` block
- unneeded return statement
All these issues have been fixed through this patch, and rustfmt has
been run to cleanup potential formatting errors due to those changes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By introducing new kernel configuration related to DAX support, the
tests are not working as they were before. The format of the image
passed through virtio-pmem needs to be in proper raw format, otherwise
the virtio-pmem driver cannot complete its probing.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing integration tests are extended to support both use cases
where dax=on and dax=off.
In order to support DAX, the kernel configuration needs to be updated to
include CONFIG_FS_DAX and CONFIG_ZONE_DEVICE.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to support the more performant version of virtio-fs, that is
the one relying on a shared memory region between host and guest, we
introduce two new parameters to the --fs device.
The "dax" parameter allows the user to choose if he wants to use the
shared memory region with virtio-fs. By default, this parameter is "on".
The "cache_size" parameter allows the user to specify the amount of
memory that should be shared between host and guest. By default, the
value of this parameter is 8Gib as advised by virtio-fs maintainers.
Note that dax=off and cache_size are incompatible.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because the way to mount virtio-fs filesystem changed with newest
kernel, we need to update the mount command in our integration tests.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Poor performance was observed when booting kernels with "console=ttyS0"
and the serial port disabled.
This change introduces a "null" console output mode and makes it the
default for the serial console. In this case the serial port
is advertised as per other output modes but there is no input and any
output is dropped.
Fixes: #163
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This makes the log macros (error!, warn!, info!, etc) in the code work.
It currently defaults to showing only error! messages, but by passing an
increasing number of "-v"s on the command line the verbosity can be
increased.
By default log output goes onto stderr but it can also be sent to a
file.
Fixes: #121
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce a new DiskConfig implementation for Ubuntu Bionic with
different cloud init preparation details and use this when testing with
test_simple_launch.
Adjust the memory expectation for downwards as the EFI boot results in a
slightly different memory map. Also enable serial port as Ubuntu does
not support a virtio-console based boot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than embed the disks in a vector and have integer indicies into
the vector for the different disks instead abstract this through an enum
type used on the DiskConfig trait.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extract the network configuration into its own struct and also extract
the prepare_files() and prepare_cloudinit() functions into a struct for
the Clear Linux distribution.
This struct is behind a trait that is used by the Guest implementation
to prepare the files.
This will allow a different implementation to be used for the Ubuntu
disk files.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
And rename the default user from "admin" to "cloud" as the admin user
clashes with a standard user and group name on Ubuntu.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The newer kernel is resulting in entropy being slightly lower than
previously. Adjust the expected entropy downwards.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This should reduce the integration testing time considerably. When a
custom kernel is no longer required we can pull kernel from tarball
again.
Fixes: #100
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The VFIO integration test first boots a QEMU guest and then assigns the
QEMU virtio-pci networking device into a nested cloud-hypervisor guest.
We then check that we can ssh into the nested guest and verify that it's
running with the right kernel command line.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
With the VFIO crate, we can now support directly assigned PCI devices
into cloud-hypervisor guests.
We support assigning multiple host devices, through the --device command
line parameter. This parameter takes the host device sysfs path.
Fixes: #60
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Two integration tests are added for testing the implemented virtio
console device for single port operation. One checks the presence
and the simple stdout operation. The other test checks the stdout
on file (option: file) using virtio console.
Signed-off-by: A K M Fazla Mehrab <fazla.mehrab.akm@intel.com>
To use the implemented virtio console device, the users can select one
of the three options ("off", "tty" or "file=/path/to/the/file") with
the command line argument "--console". By default, the console is
enabled as a device named "hvc0" (option: tty). When "off" option is
used, the console device is not added to the VM configuration at all.
Signed-off-by: A K M Fazla Mehrab <fazla.mehrab.akm@intel.com>
Create a struct to handle all the details for the guest under test
including details of network and disks.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Allow replacement of the network details used for the VM. By replacing
those from the file checked into the source tree we can continue to use
the file in the tree for manual testing but adjust the network per-VM to
allow parallel testing.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In the future this will provide the basis for the ability to customise
the cloud-init file per VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By sleeping more earlier this will speed up the tests as the SSH
connection will complete on the first attempt and thus alleviate timeout
and backoff delays.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use the tempdir crate to create a temporary directory that is deleted
when the structure goes out of scope.
Use this temporary directory for all temporary test files created by the
tests. The cloud init file is still in /tmp as that is created by the
test wrapper code.
This is the first stage towards being able to run the integration tests
in parallel.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a "--serial" command line that takes as input either "off", "tty"
(default and current behaviour) and "file=/path/to/file".
When "--serial off" is used the serial device is not added to the VM
configuration at all.
Integration tests added that check for interrupts present (or not) and
that when sending to a file the file contains the expected serial
output.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that cloud-hypervisor VMM supports virtio-pmem, it can directly
boot a VM from an image exposed as a persistent memory block device.
That's why there is no need to force the --disk option as being
mandatory.
Fixes#90
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Until now, the VMM was only accepting a single instance of virtio-net
device. This commit extends the virtio-net support by allowing several
devices to be created for a single VM.
Fixes#71
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
For every parameter dealing with a size as option, such as memory or
virtio-pmem, the CLI can now parse sizes with the suffixes K, M or G.
Fixes#70
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Until now, the VMM was only accepting a single instance of virtio-pmem
device. This commit extend the virtio-pmem support by allowing several
devices to be created for a single VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add 2 integration tests to validate virtio-pmem works as expected.
One test takes care of checking the ability to read and write to this
persistent memory from the guest, and validates that the data is
carried over the virtualization boundary.
The other test ensures the VM can be booted directly from an image
that would be passed through virtio-pmem.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch plumbs the virtio-pmem device to the VMM. By adding a new
command line option "--pmem", we can now expose some persistent memory
to the guest OS, backed by the provided source.
The point of having such support in cloud-hypervisor is to be able to
share some memory between the host and the guest as DAXable.
One interesting use case is to boot directly from an image passed
through virtio-pmem, instead of going through virtio-blk. This can
allow good performances while avoiding the guest cache, which would
prevent the VM memory footprint from growing too much.
Fixes#68
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Until now, the VMM was only accepting a single instance of a virtio-fs
device. This commit extend the virtio-fs support by allowing several
devices to be created for a single VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces the testing of the --fs option based on the
virtio-fs implementation. This does not simply add a test, but also
updates the integration script by generating a new kernel embedding
the virtio-fs patches and by downloading the virtiofsd daemon.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In the context of vhost-user, we need the guest RAM to be backed by
a file in order to be accessed by an external process. This patch
adds the new flag "file=" to the "--memory" option so that we can
specify from the command line if the memory needs to be backed, and
by which specific file.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The user can now share some files and directories with the guest by
providing the corresponding vhost-user socket. The virtiofsd daemon
should be started by the user before to start the VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the newly added code, we expect the split irqchip to be used.
This means we should not see any "timer" or "cascade" components
attached to the IOAPIC since our userspace IOAPIC does not advertise
those.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
KVM exposes CPUID 0BH when host supports that, but the APIC ID that KVM
provides is the host APIC ID so we need replace that with ours.
Without this Linux guest reports something like:
[Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 APIC: 21
Fixes#42
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Download and build a Linux kernel and use the vmlinux produced as the
kernel used with a direct boot kernel test.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With slide variations in the kernel the memory size checks can fail so
round down the testing numbers to the nearest multiple of 1000 to make
the tests more stable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Switch the Clear Linux version to a newer release and cache that in an
azure bucket in the same region to improve the CI speed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Launch the test binary by command rather than using using the vmm layer.
This makes it easier to manage the running VM as you can explicitly kill
it.
Also switch to using credibility for the tests which catches assertions
and continues with subsequent commands and reports the issues at the
end. This means it is possible to cleanup even on failed test runs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add basic integration testing of the hypervisor using a cloud-init to
configure the VM at boot and SSH to control it at runtime.
Initial test just boots the VM up checks some basic resources and
reboots. With a second test that calls into the first to check that
subsequent tests work correctly.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The command line parsing of the user input was not properly
abstracted from the vmm specific code. In the case of --net,
the parsing was done when the device manager was adding devices.
In order to fix this confusion, this patch introduces a new
module "config" dedicated to the translation of a VmParams
structure into a VmCfg structure. The former is built based
on the input provided by the user, while the latter is the
result of the parsing of every options.
VmCfg is meant to be consumed by the vmm specific code, and
it is also a fully public structure so that it can directly
be built from a testing environment.
Fixes#31
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Store the list of disks in a Vec<PathBuf> and then iterate over that
when creating the block devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Recent refactoring of the flags parsing broke the --net behavior where
the network tap interface should be created by the VMM if the user does
not provide any argument to this option.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
CONTRIBUTING.md: removed a space to suport markdown linking
Refactored cmdline and net_params arguments to use option adapters
to achieve the same parsed results in a "more rusty" way.
Deleted a space in the contributing markdown to link properly.
Signed-off-by: Logan Saso <logansaso+tech@gmail.com>
If no commandline is supplied replace with an empty string. No kernel
commandline is needed when using the firmware to boot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Until now, the only way to get some networking with cloud-hypervisor
was to let the user create a TAP interface first, and then to provide
the name of this interface to the VMM.
This patch extend the previous behavior by adding the support for the
creation of a brand new TAP interface from the VMM itself. In case no
interface name is provided through "tap=<if_name>", we will assume
the user wants the VMM to create and set the interface on its behalf,
no matter the value of other parameters (ip, mask, and mac).
In this same scenario, because the user expects the VMM to create the
TAP interface, he can also provide the associated IP address and subnet
mask associated with it. In case those values are not provided, some
default ones will be picked.
No matter the value of "tap", the MAC address will always be set, and
if no value is provided, the VMM will come up with a default value for
it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Most of the code is taken from crosvm(bbd24c5) but is modified to
be adapted to the current VirtioDevice definition and epoll
implementation.
A new command option '--rng' is provided and it gives one the option
to override the entropy source which is /dev/urandom by default.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
This patch expand the device registration to add a new virtio-net
device in case the user provide the appropriate flag --net from the
command line.
If the flag is provided, the code will parse the TAP interface name
and the expected MAC address from the command line. The VM will be
connected to the provided TAP interface, and it will communicate the
MAC address to the virtio-net driver.
If the flag is not provided, the VM will not register any virtio-net
device, therefore it will not have any connectivity with the host.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the user choose which kernel parameters to append, the
kernel boot parameters can be now specified from the command line.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the new virtio-blk support, this commit allows any user to
specify a --disk option in order to select the rootfs it wants to
use for the VM.
For now it assumes the partition 3 /dev/vd3 is the one where we can
find the rootfs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the Firecracker devices crate from commit 9cdb5b2.
It is a trimmed down version compared to the Firecracker one, to remove
a bunch of pulled dependencies (logger, metrics, rate limiter, etc...).
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
