This allocator allocates 64-bit MMIO addresses for use with platform
devices e.g. ACPI control devices and ensures there is no overlap with
PCI address space ranges which can cause issues with PCI device
remapping.
Use this allocator the ACPI platform devices.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
On FDT, VMM can allocate IRQ from 0 for devices.
But on ACPI, the lowest range below 32 has to be avoided.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Now all crates use edition = "2018" then the majority of the "extern
crate" statements can be removed. Only those for importing macros need
to remain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
On AArch64, interrupt controller (GIC) is emulated by KVM. VMM need to
set IRQ routing for devices, including legacy ones.
Before this commit, IRQ routing was only set for MSI. Legacy routing
entries of type KVM_IRQ_ROUTING_IRQCHIP were missing. That is way legacy
devices (like serial device ttyS0) does not work.
The setting of X86 IRQ routing entries are not impacted.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Currently, not every feature of the cloud-hypervisor is enabled
on AArch64, which means that on AArch64 machines, the
`run_unit_tests.sh` needs to be tailored and some unit test cases
should be run on x86_64 only.
Also this commit fixes the typo and unifies `Arm64` and `AArch64`
in the AArch64 document.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Implemented GSI allocator and system allocator for AArch64.
Renamed some layout definitions to align more code between architectures.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The allocator already had functions to allocate and free both IO and 64
bits MMIO address spaces, but it only had an allocating function for 32
bits MMIO address space.
With this new function, it will be now possible to remove cleanly some
ranges from the 32 bits MMIO address space.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is one corner case which was not properly handled by the current
code from our AddressAllocator. If both the address start (from the
next range) and the requested region size are already aligned on the
same value as "alignment", when doing the substract of the requested
size + alignment, the returned address is already aligned. The problem
is that we might end up overlapping with an existing range since the
check between the available delta and the requested size does not take
into account a full extra alignment.
By substracting the requested size + alignment - 1 from the address
start of the next range, we ensure this kind of corner case would not
happen since the address won't be naturally aligned and after some
adjustment from the function align_address(), the correct start address
will be returned.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With this new AddressAllocator as part of the SystemAllocator, the
VMM can now decide with finer granularity where to place memory.
By allocating the RAM and the hole into the MMIO address space, we
ensure that no memory will be allocated by accident where the RAM or
where the hole is.
And by creating the new MMIO hole address space, we create a subset
of the entire MMIO address space where we can place 32 bits BARs for
example.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The requested address for a range can be the base of the entire
address space, this is a valid use case.
In particular, when creating an MMIO address space of 0-64GiB, we
might want to create a range of 0-1GiB if the RAM of our VM is 1G.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch fixes the function first_available_range() responsible
for finding the first range that could fit the requested size.
The algorithm was working, that is allocating ranges from the end
of the address space because we created an empty region right at the
end. But the problem is, the VMM might request for some specific
allocations at fixed address to allocate the RAM for example. In this
case, the RAM range could be 0-1GiB, which means with the previous
algorithm, the new available range would have been found right after
1GiB.
This is not the intended behavior, and that's why the algorithm has
been fixed by this patch, making sure to walk down existing ranges
starting from the end.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
GSI (Global System Interrupt) is an extension of just a linear array of
IRQs. It takes IOAPICs into account for example.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
There is alignment support for AddressAllocator but there are occations
that the alignment is known only when we call allocate(). One example
is PCI BAR which is natually aligned, means for which we have to align
the base address to its size.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
This is only for allocating the port IO address range.
If a platform does not have PIO devices at all, the address
range will simply be unused.
So, simplify the vm-allocator data structure by making both
MMIO and PIO mandatory.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
The IO memory alignment should be set as byte alignment instead of 0x400
which is copied from crosvm.
Signed-off-by: Jing Liu <jing2.liu@linux.intel.com>
We can only free ranges that exactly map an already allocated one, i.e.
this is not a range resizing.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Add the BSD and Apache license.
Make all crosvm references point to the BSD license.
Add the right copyrights and identifier to our VMM code.
Add Intel copyright to the vm-virtio and pci crates.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This is based on the crosvm resource allocator from commit 107edb3e.
We only have PIO and MMIO address space to handle, and don't have a GPU
specific path and space.
Also, we support allocating a range at a specified address. This is
mostly useful for PIO, but might be also necessary for MMIO.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
