Disable the DAX feature from the virtio-fs implementation as the feature
is still not stable. The feature is deprecated, meaning the 'dax'
parameter will be removed in about 2 releases cycles.
In the meantime, the parameter value is ignored and forced to be
disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When running non-dynamic or with virtio-mem for hotplug the ACPI
functionality should not be included on the DSDT nor does the
MemoryManager need to be placed on the MMIO bus.
Fixes: #3883
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is now consistent with not supplying the _CRS for the device when
CpuManager is not dynamic.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than just printing a message return an error back through the API
if the user attempts to hotplug a device that supports being behind an
IOMMU where that device isn't placed on an IOMMU segment.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Ensure devices that are specified to be on a PCI segment that is behind
the IOMMU are IOMMU enabled if possible or error out for those devices
that do not support it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Previously it was not possible to enable vIOMMU for a virtio device.
However with the ability to place an entire PCI segment behind the
IOMMU the IOMMU mapping needs to be setup for the virtio device if it is
behind the IOMMU.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This can already be calculated by the summing the tables reported by the
Linux kernel but this is more convenient.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Separate the destruction and cleanup of original VM and the creation of
the new one. In particular have a clear hand off point for resources
(e.g. reset EventFd) used by the new VM from the original. In the
situation where vm.shutdown() generates an error this also avoids the
Vmm reference to the Vm (self.vm) from being maintained.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the newly added Vdpa device along with the new vdpa parameter,
this patch enables the support for vDPA devices.
It's important to note this the only virtio device for which we provide
an ExternalDmaMapping instance. This will allow for the right DMA ranges
to be mapped/unmapped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce a new --vdpa parameter associated with a VdpaConfig for the
future creation of a Vdpa device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will significantly reduce the size of the DSDT and the effort
required to parse them if there is no requirement to support
hotplug/unplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the CpuManager is dynamic it devices CPUs can be
hotplugged/unplugged.
Since TDX does not support CPU hotplug this is currently the only
determinator as to whether the CpuManager is dynamic.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
vmm.ping/vm.info will hang for PUT method, vm.create/vmm.shutdonw hang for GET method.
Because these four APIs do not write the response body when the HTTP method does not match.
Signed-off-by: LiHui <andrewli@kubesphere.io>
In case the virtio device which requires DMA mapping is placed behind a
virtual IOMMU, we shouldn't map/unmap any region manually. Instead, we
provide the DMA handler to the virtio-iommu device so that it can
trigger the proper mappings.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If a virtio device is associated with a DMA handler, the DMA mapping and
unmapping is performed from the device manager through the handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given that some virtio device might need some DMA handling, we provide a
way to store this through the VirtioPciDevice layer, so that it can be
accessed when the PCI device is removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for handling potential DMA mapping/unmapping operations for a
virtio device, we extend the MetaVirtioDevice with an additional field
that holds an optional DMA handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The tuple of information related to each virtio device is too big, and
it's better to factorize it through a dedicated structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When mask a msi irq, we set the entry.masked to be true, so kvm
hypervisor will not pass the gsi to kernel through KVM_SET_GSI_ROUTING
ioctl which update kvm->irq_routing. This will trigger kernel
panic on AMD platform when the gsi is the largest one in kernel
kvm->irqfds.items:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
To solve this problem, move route.disable() before set_gsi_routes() to
remove the gsi from irqfds.items first.
This problem only exists on AMD platform, 'cause on Intel platform
kernel just return when update irte while it only prints a warning on
AMD.
Also, this patch adjusts the order of enable() and set_gsi_routes() in
unmask(), which should do no harm.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
When mask a msi irq, we set the entry.masked to be true, so kvm
hypervisor will not pass the gsi to kernel through KVM_SET_GSI_ROUTING
ioctl which update kvm->irq_routing. This will trigger kernel
panic on AMD platform when the gsi is the largest one in kernel
kvm->irqfds.items:
crash> bt
PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8"
#0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397
#1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d
#2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d
#3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d
#4 [ffffb1ba6707fb90] no_context at ffffffff856692c9
#5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51
#6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace
[exception RIP: svm_update_pi_irte+227]
RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086
RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001
RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8
RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200
R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm]
#8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm]
#9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm]
RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246
RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b
RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020
RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0
R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0
R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0
ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b
To solve this problem, move route.disable() before set_gsi_routes() to
remove the gsi from irqfds.items first.
This problem only exists on AMD platform, 'cause on Intel platform
kernel just return when update irte while it only prints a warning on
AMD.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Move to release version v0.2.0 for both vm-virtio and vhost-user-backend
crates rather than relying on their main branch, as they might be
subject to breaking changes.
Fixes#3800
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a field for its length and fix up users.
Things work just because all hardcoded values agree with each other.
This is prone to breakage.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This commit adds event fds and the event handler to send/receive
requests and responses from the GDB thread. It also adds `--gdb` flag to
enable GDB stub feature.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `stop_on_boot` to `Vm` so that the VM stops before
starting on boot requested. This change is required to keep the target
VM stopped before a debugger attached as the user expected.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `Vm::debug_request` to handle `GdbRequestPayload`,
which will be sent from the GDB thread.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds initial gdb.rs implementation for `Debuggable` trait to
describe a debuggable component. Some part of the trait bound
implementations is based on the crosvm GDB stub code [1].
[1] https://github.com/google/crosvm/blob/main/src/gdb.rs
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `KVM_SET_GUEST_DEBUG` and `KVM_TRANSLATE` ioctls to
seccomp filter to enable guest debugging without `--seccomp=false`.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
This commit adds `VmState::BreakPoint` to handle hardware breakpoint.
The VM will enter this state when a breakpoint hits or a debugger
interrupts the execution.
Signed-off-by: Akira Moroo <retrage01@gmail.com>
42b5d4a2f7 has changed how the PciBdf
field of a DeviceNode is represented (from an int32 to its own struct).
To avoid marshelling / demarshelling issues for the projects relying on
the openapi auto generated code, let's propagate the change, updating
the yaml file accordingly.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`Dies per package` setting of VCPU topology doesnot apply on AArch64.
Now we only accept `1` value. This way we can make the `dies` field
transparent, avoid it from impacting the topology setting.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>