Some sporadic failures were due to an early connection to the VM while
it was not fully ready. Increasing sleep times fixes these issues.
Fixes#2104
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given we already check the connected IP address matches the expected
guest IP address, the check on the "booted" message is not needed.
Fixes: #2117
Signed-off-by: Bo Chen <chen.bo@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This test is very flaky and regularly causing CI failures. Until we can
identify the root cause we should disable this test.
See: #2103
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Simplify our image handling by not copying both QCOW2 and raw images for
every test. Allow the test to choose QCOW2 or raw by specifying the
image name manually. A follow on patch will add explicity QCOW2 tests.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When an SSH command fails we want to be able to see, via a panic() why
and where it failed. Replace use of .unwrap_or_default() from SSH
command calls to ensure that we can see the location of the panic.
Also enhance the existing SSH output code to show the error if there is
one.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The boot time for direct kernel boot based tests is significantly
quicker than booting via the firmware and stock kernel as it triggers a
reboot during the boot process due to the initrd handling.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When doing a direct kernel boot only have console=ttyS0 in the command
line if we are explicitly testing the serial output. The default
behaviour is `--serial null` so this output will not be visible but will
trigger a KVM exit for every byte which is very costly when running
under nested virtualization.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Starting the virtio device threads from the VMM thread has slowed down
the start of the VM when running on a highly contested system like the
CI.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
On the CI we are seeing that sometimes the epoll is receiving these
errors which do not indicate a failure but that we should retry.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As we switched to focal for this test we no longer get any output during
the boot unless serial is used over virtio-console.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There have been a lot of flakes around tests such as
test_virtio_fs_hotplug_dax_on_w_vhost_user_fs_daemon() or
test_virtio_fs_hotplug_dax_on() which all try and hotplug memory.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the removal of vhost-user self-spawning support we should migrate
the tests to use the binaries so that we can remove the functionality
from the cloud-hypervisor binary itself.
See: #1925
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
While the addressable space size reduction of 4k in necessary due to
the Linux bug, the 64k alignment of the addressable space size is
required by Windows. This patch satisfies both.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Set the test case test_snapshot_restore X86 only, instead of excluding
it from test command line.
The command line option was added because we used to support migration
with Virtio-MMIO, but not Virtio-PCI.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Tests not ported include 1) the ones that start guest VMs without
network (e.g. test_net_hotplug, test_initramfs), 2) test_vfio that
involves l2 guest. Also, some tests that use bionic guest image are
given extended timeout (120s) for 'wait_vm_boot'.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Instead of waiting blindly with fixed amount of sleeping time, we can
use the `wait-timeout` crate to explicitly wait VM shutdown (with a
timeout). It can reduces the execution time of some tests
substantially. Also, this patch increases the `shutdown` timeout for
'test_reboot', which should fix the recent sporadic failures on this
test.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Instead of blindly waiting for 20-40s for the guest VM to boot, this
patch waits the notification from the guest VM explicitly by using a
simple TcpListener on the host and a custom systemd service in the
guest.
This patch also ported few tests to use this new machanism, while more
tests are to be ported.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Now that virtio-balloon is not declared as part of the --memory
parameter, the integration tests are updated to keep the correct
behavior.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given the increased amount of output from cloud-hypervisor, this patch
also increased the PIPE_SIZE to 32MB (from 256KB).
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch prints the complete commandline when launching
cloud-hypervisor. It also prints the details of the `ssh` command if
the command is failing.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This is a new integration test running Windows as a guest with Cloud
Hypervisor. Once the VM is booted, the test connects to the guest
through SSH and shutdown the VM. If this succeeds, this means the VM
was properly booted to userspace and that the network was functional.
Important to note that because this test generates lots of logs, it
requires a large pipe size for both stdout and stderr.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Introduce a new test that will validate the new option `max_phys_bits`
from the `--cpus` parameter behaves as expected.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since all unit and integration tests are run inside containers because
they are called from dev_cli.sh, they always run as root. That's why
both unit and integration scripts can be simplified as they don't need
to apply specific capabilities and run cargo tests in a dedicated 'kvm'
group.
Fixes#1683
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing virtio-blk hotplug test is extended by removing and
re-adding the virtio-blk device. This ensures the unplug/re-plug
feature is properly tested.
Fixes#1809
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The existing virtio-net hotplug test is extended by removing and
re-adding the virtio-net device. This ensures the unplug/re-plug
feature is properly tested.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As discussed in #1707, the `vcpu` thread can be stalled when using
`--serial tty`. To workaround that issue, this patch enforces to resize
the pipe size to 256K when we capture the stdout/stderr of the
cloud-hypervisor child process in the integration tests. Note that the
pipe size (256K) is chosen based on the output size of our integration
tests at this point, which may need to be increased in the future.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Now that virtio-mem supports reboot, we extend the existing integration
tests to validate the amount of RAM after reboot is the same as before
the reboot, but also that we can still resize down the VM or the memory
zone after the reboot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend the existing test to validate that each NUMA node gets assigned
the right amount of memory after each memory zone has been resized.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that we can resize each memory zone independently, this commit
extends the memory zone related test by validating 'vm.resize-zone'
works correctly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extending the Cloud-Hypervisor CI to allow for testing SGX on a
dedicated machine where special image and kernels are ready.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The goal of this commit is to rename the existing NUMA option 'id' with
'guest_numa_id'. This is done without any modification to the way this
option behaves.
The reason for the rename is caused by the observation that all other
parameters with an option called 'id' expect a string to be provided.
Because in this particular case we expect a u32 representing a proximity
domain from the ACPI specification, it's better to name it with a more
explicit name.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since both --memory-zone and --numa parameters have been updated with
addition and removal of multiple options, this commit updates the
related integration tests to ensure they are still valid.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch ported many tests to the new methodology, where the guest log
will be printed only when the test is failing.
Things to finish in follow-up PRs:
1. Special tests not ported yet include: test_reboot,
test_bzimage_reboot, test_serial_null(), test_serial_tty(),
test_serial_file(), test_virtio_console(), test_console_file(),
and test_simple_launch.
2. Few direct calls to 'Command::new(clh_command("cloud-hypervisor"))',
which is still printing the guest console
Signed-off-by: Bo Chen <chen.bo@intel.com>
By extending the existing NUMA integration test, this commit validates
the proper distances between NUMA nodes are exposed to the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend the existing NUMA integration to validate that specifying CPUs
for each NUMA node gets propagated to the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new test validates the guest OS can find the NUMA nodes which have
been defined by the user through the CLI, and that the right amount of
memory is associated with each node.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the new option 'host_numa_node' from the 'memory-zone'
parameter, the user can now define which NUMA node from the host
should be used to back the current memory zone.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a small test to validate that user defined memory zones work as
expected when using --memory-zone option.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This required a bit of rearranging as it is not possible to call
prepare_daemon() inside a catch_unwind{} block.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now the testing aspects are run inside a panic handler block rather than
inside a credibility TestBlock. If the test fails then the output from
the cloud-hypervisor binary is then presented.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This reduces the complexity of the test slightly. The PCI BDFs in the L1
needed changing as the block devices come before the network ones.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than using a credible TestBlock to capture the test assertions
instead use a catch_unwind block to catch the panic and turn
it into a Result<>.
If block panicked or the child binary had non-zero exit then, and only
then, print out the child output.
This results in a clearer test output with no interleaving.
Currently only test_counters is ported to this methodology to
demonstrate its use.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit enables the test case for testing the basic function
of virtio_vsock (i.e. without the hotplug).
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit enables the `api_create_boot` case in the integration
test as the test for the Cloud Hypervisor API server functionality.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit enables the virtio-fs related integration test cases
for AArch64.
Note that to run virtio-fs cases, the host kernel should be
newer than v5.5.
Fixes: https://github.com/cloud-hypervisor/cloud-hypervisor/issues/1516
Signed-off-by: Henry Wang <henry.wang@arm.com>
This commit enables some mmio-related integration test cases on
AArch64, including:
* some vhost_user test cases
* virtio-blk test cases
* pmem test cases
Also this commit contains a bug fix in creating virtio-blk device.
Previously, when creating the FDT, the virtio-blk device was
labeled in the reverse order of address allocation.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Under high load, the VM might take some time to hotplug the disk after
the hotplug command has been issued. For this reason, let's put a 10s
sleep before checking for the presence of the new disk.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We want to give the time to the nested VM to be fully ready before we
check it's correctly setup. This involves 3 layers of virtualization
when running the CI on Azure, which added to the high load happening
because of the parallelization, adds up to the start up time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As compiling without acpi (implied by mmio) means that the VM will
terminate on i8042 reset we cannot test the reboot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Check if increasing the time after the VM is spawned help with getting
more stable numbers for the base PSS.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The compiled AArch64 linux kernel by running `make` is in PE format
instead of vmlinux, vmlinux.pvh and bzImage format. Therefore we
need to add integration test for this case.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In order to differentiate tests that can be run in parallel versus
tests that must be run on their own, we move all tests into dedicated
modules.
The point is to avoid glitches in results that can be caused by the fact
that other tests (hence VMs) are running at the same time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the CI to rely entirely on Ubuntu cloud images. It's worth noting
that both QCOW2 and RAW images from Ubuntu Focal Fossa have been
modified to include the tools needed from integration tests.
This means fio, iperf, iperf3, netcat and socat have been added to the
image. The snapd package have been fully removed as it was expecting the
support for squashfs (not present when using our own kernel from direct
kernel boot), which was causing some failures, and was preventing
cloud-init from terminating properly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With QCOW disk images the space needed is greater than the size of the
iamge as any "zero" blocks in the image are allocated when they are
touched making the image bigger.
Here we add a threshold of 6GiB with added debugging messages to ensure
that there is sufficient disk space to run the tests.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Extend the existing integration test test_snapshot_restore by testing
with more than one vCPU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a simple test to check that the data from the counters matches what
is expected and that the value of the counters increases after an
operation that will hit all counters.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a request is made to increase the number of vCPUs in the VM attempt
to reuse any previously removed (and hence inactive) vCPUs before
creating new ones.
This ensures that the APIC ID is not reused for a different KVM vCPU
(which is not allowed) and that the APIC IDs are also sequential.
The two key changes to support this are:
* Clearing the "kill" bit on the old vCPU state so that it does not
immediately exit upon thread recreation.
* Using the length of the vcpus vector (the number of allocated vcpus)
rather than the number of active vCPUs (.present_vcpus()) to determine
how many should be created.
This change also introduced some new info!() debugging on the vCPU
creation/removal path to aid further development in the future.
TEST=Expanded test_cpu_hotplug test.
Fixes: #1338
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that snapshot/restore is symmetrical, that is the VM must be paused
before it is snapshot and it must be resumed after it's been restored,
the integration test is updated accordingly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add multiple integration tests with various different CPU topologies and
check that they work as expected.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Upon PCI hotplug, the VMM now returns some information about the device
name and the associated b/d/f. This patch extends the integration tests
so that we validate the response is the one that is expected.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This revised version of the patch reuses the back-off strategy from
'ssh_command()' to deal with varying booting time.
Fixes: #1209
Signed-off-by: Bo Chen <chen.bo@intel.com>
This config option provided very little value and instead we now enable
this feature (which then lets the guest control the cache mode)
unconditionally.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that snapshot/restore support has been enabled for virtio-vsock, the
corresponding integration test is expanded with some validation that
virtio-vsock supports to be snapshot and restored.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When compiled with pci feature, the integration test now validates that
/dev/vdb can be correctly read while being placed behing a virtual
IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The integration test validating that --serial off works correctly was
not properly written as it was using the FW, which by default would use
the kernel command line found in the EFI partition. Unfortunately, this
kernel command line was including "console=ttyS0", which causes the
kernel to try to write to the serial port, even if there's no serial
port being emulated.
The problem is, when no emulation of the serial port is provided, the
default value returned on 0x3f8 is 0, which makes the guest kernel think
that some data needs to be read.
The only way to avoid all this is by ensuring we can control the kernel
command line by removing any occurence of "console=ttyS0" from it.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend the set of tests we have for virtio-net and vhost-user-net to
check for host MAC address setting.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There's a simple way to trigger PCI BAR reprogramming for a given
device, by removing it and then hotplugging it back. The Linux kernel
will simply choose to place the BARs at different location than the ones
chosen by Cloud-Hypervisor. By doing so, and creating the snapshot after
this hotplug operation, we can manage to validate that the resource are
correctly restored for a given virtio-pci device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that snapshot/restore feature is stable for both virtio-mmio and
virtio-pci devices, we re-enable the integration test for validating
snapshot/restore does not get broken.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that virtio-fs has unplug support try unplugging and readding the
virtio-fs device.
Fixes: #1050
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The mmio integration test build currently doesn't use ACPI so piggyback
on that test variation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Continue to try and track down the instability in the numbers generated
by this test by removing the (unused) network interface. It's possible
we are getting broadcast packets into the tap device and generating a
variable size of allocations.
See: #760
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Switch to using the recently added OptionParser in the code that parses
the network backend.
Whilst doing this also update the net-backend syntax to use "sock"
rather than socket.
Fixes: #1092
Partially fixes: #1091
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To aid the debugging of why the test_memory_overhead sometimes fails
print a details of all the named regions that it uses in its
calculation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The current tests support giving a tap name but they only test with tap
interfaces that already exist.
Fixes: #871
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We pass it to the integration and unit tests script through --libc.
Cargo tests are left unmodified.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
If a size is specified use it (in particular this is required if the
destination is a directory) otherwise seek in the file to get the size
of the file.
Add a new check that the size is a multiple of 2MiB otherwise the kernel
will reject it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The new 'shared' and 'hugepages' controls aim to replace the 'file'
option in MemoryConfig. This patch also updated all related integration
tests to use the new controls (instead of providing explicit paths to
"/dev/shm" or "/dev/hugepages").
Fixes: #1011
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
The newly added integration test "test_snapshot_restore" is very
unstable, which causes our CI to fail on most pull requests, which is
not acceptable. That's why we ignore this test until we can fix the
stability issue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that we have multiple virtio devices supporting snapshot and restore
operations, we can add a new integration test to validate the migration
feature works as expected.
The important part is virtio-net as it is used to ssh into the VM to
verify the VM has been restored in the proper state.
This test only works for virtio-mmio for now. Further support for
testing virtio-pci will be added once the virtio-pci transport layer
will support migration.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is some duplication between regular and hotplug virtio-fs tests
that can be factorized by adding a simple hotplug flag to choose if each
test should run with or without hotplugging the device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
One more time, we're extending the VFIO integration test to verify that
a VFIO device passed through a VM is still usable after some new memory
has been hotplugged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
the integration test creates an initramfs image based on AlpineLinux mini root filesystem
with a simple /init script that just echoes a string to the console. The string
is passed via the kernel cmdline as an environment variable.
Signed-off-by: Damjan Georgievski <gdamjan@gmail.com>
All vhost-user-blk, vhost-user-net and virtio-fs integration tests are
extended with memory resizing. The point is to validate that we can
hotplug some memory and keep these backends to work as expected.
Just a note that because memory resizing is not supported by mmio, we
limit these extensions to all non-mmio use cases.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The same Clear Linux kernel command line was repeated again and again in
the code. That's why this commit takes care of factorizing it, which
simplifies the code but also simplify maintenance whenever we'd need to
update the block UUID.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The hypervisor-fw does not support virtio-blk through mmio transport
layer, therefore we can only run tests with mmio if these tests boot
directly to kernel.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There's no reason mmio builds cannot support vhost-user-blk, therefore
there's no reason to skip these tests for mmio.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As a first step towards factorizing as many vhost-user-blk tests as
possible, this patch takes care of unifying their expected output.
It also makes a clear separation between the tests booting from
vhost-user-blk from the ones passing an extra volume.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to limit code duplication, vhost-user-net integration tests are
further factorized, as they now include the self spawning test.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Factorise test_virtio_pmem to test changes are not persisted if file is
readonly.
As virtio-mem is now supported in the upstream kernel we can switch to
using the firmware.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than using a raw OS disk image. This will be useful when the test
is extended to doing I/O on the image.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This feature is stable and there is no need for this to be behind a
flag. This will also reduce the time needed to run the integration test
as we will not be running them all again under the flag.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add an integration test that builds cloud-hypervisor with
the pvh_boot feature and boots a kernel built with CONFIG_PVH.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Add a new id option to the VFIO hotplug command so that it matches the
VFIO coldplug semantic.
This is done by refactoring the existing code for VFIO hotplug, where
VmAddDeviceData structure is replaced by DeviceConfig. This structure is
the one used whenever a VFIO device is coldplugged, which is why it
makes sense to reuse it for the hotplug codepath.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Replace sudo invocations of bash creating a subshell with simpler
solutions by running the program directly on the input or using tee.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As part of bringing the tests up with virtio-mmio the virtio-fs were
wrongly disabled. Re-enable them and remove the cache size check as the
cache does not appear in /proc/iomem on virtio-mmio.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When booting from vhost-user-block the entropy is sometimes lower
triggering a flaky test. We have already use other, more reliable
methods for checking that the VM has booted.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit extends the existing test_vfio by hotplugging an extra
virtio-net device to the L2 VM. The test for validating the hotplug
succeeded is the same as the one to verify the non-hotplugged devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that virtio-mmio transport has support for SHM regions we should be
able to test virtio-fs against it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
three extra bundles added to it.
First bundle is curl, which adds the curl binary to the image, second
bundle is iperf, adding the iperf binary to the image, and third bundle
is sysadmin-basic to include utility like netcat.
The image is 2G in size.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
On tests that expect a clean shutdown there is no need to try and kill
the child after wait() has returned as the process has already exited.
Further there is no need to sleep before wait() as wait will block until
the VM and VMM shutdown is complete.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This should address any flakiness as the VMM process will have
completely terminated and all files closed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Many of the tests attempted to SSH into the VM and then run "shutdown"
but don't actually check that the VM has shutdown correctly and proceed
to kill the child process. Remove the associated SSH commands and sleeps
from those tests that are not explicitly checking the shutdown
behaviour.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Only some tests require the output for the tests to be captured so
default to not capturing the output to a pipe and instead make it
controllable.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Many of the tests use an identical network configuration. Add a
GuestCommand::default_net() to generate this configuration and use it
wherever possible.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Many of the tests use an identical disk configuration. Add a
GuestCommand::default_disks() to generate this configuration and use it
wherever possible.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is a thin wrapper over std::process:Command which currently only
specifies the default binary but in future will handle more default
behaviour.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
