Commit Graph

556 Commits

Author SHA1 Message Date
Bo Chen
c5fdc47918 virtio-devices: block: Avoid panic with invalid guest address
Remove the use of 'unwrap()' that assumes the guest address for request
status is always valid, which avoid virtio-block thread panic on
malformed descriptors from the guest.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-08-09 08:06:53 -07:00
Bo Chen
3c26e9b741 virtio-devices: Drop unused 'queue_evts' from VirtioCommon
Signed-off-by: Bo Chen <chen.bo@intel.com>
2022-08-09 09:59:30 +02:00
dependabot[bot]
226a21811e build: bump anyhow from 1.0.59 to 1.0.60
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.59 to 1.0.60.
- [Release notes](https://github.com/dtolnay/anyhow/releases)
- [Commits](https://github.com/dtolnay/anyhow/compare/1.0.59...1.0.60)

---
updated-dependencies:
- dependency-name: anyhow
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-09 00:47:29 +00:00
Wei Liu
ec4a55b860 virtio-devices: drop mshv feature
There is no code that needs it.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2022-08-05 08:48:12 +02:00
Rob Bradford
3df8c6fd3b deps: Bulk upgrade dependencies
Some dependencies are not tracking the latest version in the .toml file
so update all dependencies to the latest version.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-08-04 18:53:33 +01:00
dependabot[bot]
a3bb459bff build: bump thiserror from 1.0.31 to 1.0.32
Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.31 to 1.0.32.
- [Release notes](https://github.com/dtolnay/thiserror/releases)
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.31...1.0.32)

---
updated-dependencies:
- dependency-name: thiserror
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-04 15:27:08 +00:00
dependabot[bot]
21da11cee7 build: bump serde_json from 1.0.82 to 1.0.83
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.82 to 1.0.83.
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.82...v1.0.83)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-04 11:44:58 +00:00
dependabot[bot]
bb444f3e7c build: bump libc from 0.2.126 to 0.2.127
Bumps [libc](https://github.com/rust-lang/libc) from 0.2.126 to 0.2.127.
- [Release notes](https://github.com/rust-lang/libc/releases)
- [Commits](https://github.com/rust-lang/libc/compare/0.2.126...0.2.127)

---
updated-dependencies:
- dependency-name: libc
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-04 10:39:47 +00:00
dependabot[bot]
4052a89268 build: bump serde from 1.0.141 to 1.0.142
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.141 to 1.0.142.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.141...v1.0.142)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-04 09:06:58 +00:00
dependabot[bot]
487458c9f8 build: bump anyhow from 1.0.58 to 1.0.59
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.58 to 1.0.59.
- [Release notes](https://github.com/dtolnay/anyhow/releases)
- [Commits](https://github.com/dtolnay/anyhow/compare/1.0.58...1.0.59)

---
updated-dependencies:
- dependency-name: anyhow
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-03 00:05:18 +00:00
dependabot[bot]
755eb80c49 build: bump arc-swap from 1.5.0 to 1.5.1
Bumps [arc-swap](https://github.com/vorner/arc-swap) from 1.5.0 to 1.5.1.
- [Release notes](https://github.com/vorner/arc-swap/releases)
- [Changelog](https://github.com/vorner/arc-swap/blob/master/CHANGELOG.md)
- [Commits](https://github.com/vorner/arc-swap/compare/v1.5.0...v1.5.1)

---
updated-dependencies:
- dependency-name: arc-swap
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-02 10:39:22 +01:00
dependabot[bot]
5f539e429a build: bump serde from 1.0.140 to 1.0.141
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.140 to 1.0.141.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.140...v1.0.141)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-08-02 01:06:45 +00:00
Sebastien Boeuf
a4859ffe85 virtio-devices: Optimize add_used() usage
Now that we rely on pop_descriptor_chain() rather than iter() to iterate
over a queue, there's no more borrow on the queue itself, meaning we can
invoke add_used() directly for the iteration loop. This simplifies the
processing of the queues for each virtio device, and bring some possible
performance improvement given we don't have to iterate twice over the
list of descriptors to invoke add_used().

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-29 17:41:32 +01:00
Sebastien Boeuf
87f57f7c1e virtio-devices: Improve queue handling with pop_descriptor_chain()
Using pop_descriptor_chain() is much more appropriate than iter() since
it recreates the iterator every time, avoiding the queue to be borrowed
and allowing the virtio-net implementation to match all the other ones.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-29 17:41:32 +01:00
Sebastien Boeuf
a423bf13ad virtio: Port codebase to the latest virtio-queue version
The new virtio-queue version introduced some breaking changes which need
to be addressed so that Cloud Hypervisor can still work with this
version.

The most important change is about removing a handle to the guest memory
from the Queue, meaning the caller has to provide the guest memory
handle for multiple methods from the QueueT trait.

One interesting aspect is that QueueT has been widely extended to
provide every getter and setter we need to access and update the Queue
structure without having direct access to its internal fields.

This patch ports all the virtio and vhost-user devices to this new crate
definition. It also updates both vhost-user-block and vhost-user-net
backends based on the updated vhost-user-backend crate. It also updates
the fuzz directory.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-29 17:41:32 +01:00
dependabot[bot]
269b78ca0f build: bump serde from 1.0.139 to 1.0.140
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.139 to 1.0.140.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.139...v1.0.140)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-07-21 13:17:32 +00:00
Sebastien Boeuf
5f98710471 virtio-devices: vhost-user: Stop the vrings on a virtio reset
Whenever a virtio reset happens, the vhost-user backend should be
notified that the vring should be stopped. This is performed by calling
GET_VRING_BASE on the appropriate queue indexes.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-21 14:28:41 +02:00
Sebastien Boeuf
613c60fc6f virtio-devices: vhost-user: Enable correct queue indexes
Rather than relying on the amount of queues to enable or disable the
queue that have been activated, we rely on the actual queue indexes
provided through the tuple including the queue index, the Queue and the
EventFd. By storing the list of indexes, we simplify the code and also
make it more accurate in case some queues aren't activated.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-21 14:28:41 +02:00
Sebastien Boeuf
3f62a172b2 virtio-devices: Pass a list of tuples for virtqueues
Instead of passing separately a list of Queues and the equivalent list
of EventFds, we consolidate these two through a tuple along with the
queue index.

The queue index can be very useful if looking for the actual index
related to the queue, no matter if other queues have been enabled or
not.

It's also convenient to have the EventFd associated with the Queue so
that we don't have to carry two lists with the same amount of items.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-21 14:28:41 +02:00
Sebastien Boeuf
423c54eafe virtio-devices: Pull correct EventFd from queue_evts list
When preparing the activator, we must provide the correct queue index to
clone the right EventFd associated with the queue.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-21 14:28:41 +02:00
Sebastien Boeuf
e1a63822fa virtio-devices: fs: Reduce minimal amount of enabled queues to 1
It's not mandatory for the virtio-fs driver to enable all virtqueues
provided by the backend since all it needs is one request queue to work
correctly. Therefore we lower the minimal amount of enabled queues to 1.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-21 14:28:41 +02:00
dependabot[bot]
b440cb7d23 build: bump vmm-sys-util from 0.9.0 to 0.10.0
This patch requires the vhost-user-backend crate to be bumped from 0.5.0
to 0.5.1.

Bumps [vmm-sys-util](https://github.com/rust-vmm/vmm-sys-util) from 0.9.0 to 0.10.0.
- [Release notes](https://github.com/rust-vmm/vmm-sys-util/releases)
- [Changelog](https://github.com/rust-vmm/vmm-sys-util/blob/main/CHANGELOG.md)
- [Commits](https://github.com/rust-vmm/vmm-sys-util/compare/v0.9.0...v0.10.0)

---
updated-dependencies:
- dependency-name: vmm-sys-util
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-20 09:40:28 +00:00
dependabot[bot]
23935ad96b build: bump io-uring from 0.5.2 to 0.5.3
Bumps [io-uring](https://github.com/tokio-rs/io-uring) from 0.5.2 to 0.5.3.
- [Release notes](https://github.com/tokio-rs/io-uring/releases)
- [Commits](https://github.com/tokio-rs/io-uring/commits)

---
updated-dependencies:
- dependency-name: io-uring
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-07-12 01:55:59 +00:00
dependabot[bot]
a99c33ccfa build: bump serde from 1.0.138 to 1.0.139
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.138 to 1.0.139.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.138...v1.0.139)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-07-11 23:54:20 +00:00
Sebastien Boeuf
a650b8645f deps: bump virtio-queue from 0.3.0 to 0.4.0
And along with virtio-queue, we must also bump vhost-user-backend from
0.3.0 to 0.5.0 (since it relies on virtio-queue 0.4.0).

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-06 16:57:09 +02:00
Sebastien Boeuf
f94a5fb4e3 virtio-devices: Pass negotiated queue size to vhost-user backend
The vhost-user backend was always provided the maximum queue size but
this is incorrect. Instead it must be informed of the actual queue size
that has been negotiated with the virtio driver running in the guest.

This ensures proper functioning of vhost-user-block with the Rust
Hypervisor Firmware, which uses a hardcoded queue size of 16.

Partially fixes #4285

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-06 14:45:46 +01:00
Sebastien Boeuf
00800b8499 virtio-devices: Remove deprecated call to VHOST_USER_RESET_OWNER
The latest vhost-user specification describes VHOST_USER_RESET_OWNER
command as deprecated with the following explanation:

  This is no longer used. Used to be sent to request disabling all
  rings, but some back-ends interpreted it to also discard connection
  state (this interpretation would lead to bugs). It is recommended that
  back-ends either ignore this message, or use it to disable all rings.

Also, it's been observed that when using either Rust Hypervisor Firmware
or EDK2 OVMF firmware with SPDK (using the block device as the boot
disk), the virtio reset that happens when the firmware no longer needs
to access the block device caused a failure by triggering the command
VHOST_USER_RESET_OWNER.

For all these reasons, this patch simplifies the virtio reset
implementation by simply disabling the virtqueues and no longer calling
into VHOST_USER_RESET_OWNER.

Partially fixes #4285

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-07-06 14:45:46 +01:00
dependabot[bot]
4f611c8654 build: bump serde from 1.0.137 to 1.0.138
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.137 to 1.0.138.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.137...v1.0.138)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-07-06 00:56:48 +00:00
Rob Bradford
adf5881757 build: #[allow(clippy::significant_drop_in_scrutinee) in some crates
This check is new in the beta version of clippy and exists to avoid
potential deadlocks by highlighting when the test in an if or for loop
is something that holds a lock. In many cases we would need to make
significant refactorings to be able to pass this check so disable in the
affected crates.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-06-30 20:50:45 +01:00
Rob Bradford
44eca31642 build: Fix beta clippy issue (needless_return)
warning: accessing first element with `data.get(0)`
    --> virtio-devices/src/transport/pci_device.rs:1055:34
     |
1055 |                 if let Some(v) = data.get(0) {
     |                                  ^^^^^^^^^^^ help: try: `data.first()`
     |
     = note: `#[warn(clippy::get_first)]` on by default
     = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#get_first

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-06-30 20:50:45 +01:00
Rob Bradford
2716bc3311 build: Fix beta clippy issue (derive_partial_eq_without_eq)
warning: you are deriving `PartialEq` and can implement `Eq`
  --> vmm/src/serial_manager.rs:59:30
   |
59 | #[derive(Debug, Clone, Copy, PartialEq)]
   |                              ^^^^^^^^^ help: consider deriving `Eq` as well: `PartialEq, Eq`
   |
   = help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-06-30 20:50:45 +01:00
dependabot[bot]
3d66e86604 build: bump serde_json from 1.0.81 to 1.0.82
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.81 to 1.0.82.
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.81...v1.0.82)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-06-30 17:56:47 +01:00
dependabot[bot]
eb55d0809e build: bump anyhow from 1.0.57 to 1.0.58
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.57 to 1.0.58.
- [Release notes](https://github.com/dtolnay/anyhow/releases)
- [Commits](https://github.com/dtolnay/anyhow/compare/1.0.57...1.0.58)

---
updated-dependencies:
- dependency-name: anyhow
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-06-21 00:46:25 +00:00
Wei Liu
439823e7ea virtio-devices: drop Send+Sync bounds for DmaRemapping
Signed-off-by: Wei Liu <liuwe@microsoft.com>
2022-06-20 23:28:57 +01:00
Rob Bradford
ade3a9c8f6 virtio-devices, vmm: Optimised async virtio device activation
In order to ensure that the virtio device thread is spawned from the vmm
thread we use an asynchronous activation mechanism for the virtio
devices. This change optimises that code so that we do not need to
iterate through all virtio devices on the platform in order to find the
one that requires activation. We solve this by creating a separate short
lived VirtioPciDeviceActivator that holds the required state for the
activation (e.g. the clones of the queues) this can then be stored onto
the device manager ready for asynchronous activation.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-06-01 09:42:02 +02:00
Rob Bradford
fa07d83565 Revert "virtio-devices, vmm: Optimised async virtio device activation"
This reverts commit f160572f9d.

There has been increased flakiness around the live migration tests since
this was merged. Speculatively reverting to see if there is increased
stability.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-05-21 21:27:33 +01:00
Rob Bradford
f160572f9d virtio-devices, vmm: Optimised async virtio device activation
In order to ensure that the virtio device thread is spawned from the vmm
thread we use an asynchronous activation mechanism for the virtio
devices. This change optimises that code so that we do not need to
iterate through all virtio devices on the platform in order to find the
one that requires activation. We solve this by creating a separate short
lived VirtioPciDeviceActivator that holds the required state for the
activation (e.g. the clones of the queues) this can then be stored onto
the device manager ready for asynchronous activation.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2022-05-20 17:07:13 +01:00
Sebastien Boeuf
49db713124 virtio-devices, vmm: Remove unused macro rules
Latest cargo beta version raises warnings about unused macro rules.
Simply remove them to fix the beta build.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-05-20 09:59:43 +01:00
dependabot[bot]
0e16ffbcff build: bump libc from 0.2.125 to 0.2.126
Bumps [libc](https://github.com/rust-lang/libc) from 0.2.125 to 0.2.126.
- [Release notes](https://github.com/rust-lang/libc/releases)
- [Commits](https://github.com/rust-lang/libc/compare/0.2.125...0.2.126)

---
updated-dependencies:
- dependency-name: libc
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-18 07:14:37 +00:00
Maksym Pavlenko
3a0429c998 cargo: Clean up serde dependencies
There is no need to include serde_derive separately,
as it can be specified as serde feature instead.

Signed-off-by: Maksym Pavlenko <pavlenko.maksym@gmail.com>
2022-05-18 08:21:19 +02:00
dependabot[bot]
7db7410920 build: bump virtio-queue from 0.2.0 to 0.3.0
Bumps [virtio-queue](https://github.com/rust-vmm/vm-virtio) from 0.2.0 to 0.3.0.
- [Release notes](https://github.com/rust-vmm/vm-virtio/releases)
- [Commits](https://github.com/rust-vmm/vm-virtio/compare/virtio-queue-v0.2.0...virtio-queue-v0.3.0)

Also relies on main branch from vhost-user-backend since it moved to
virtio-queue 0.3.0 as well, and without this change it wouldn't compile.

---
updated-dependencies:
- dependency-name: virtio-queue
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-05-16 11:47:20 +02:00
Sebastien Boeuf
64c76693c4 virtio-devices: Clone Queue with method from vm-virtio
Rely on the newly added helper from vm-virtio crate to keep cloning the
list of Queue structures.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-05-16 11:47:20 +02:00
dependabot[bot]
95c6ee3e6a build: bump serde_json from 1.0.80 to 1.0.81
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.80 to 1.0.81.
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.80...v1.0.81)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-04 00:37:09 +00:00
dependabot[bot]
30e06eaaba build: bump log from 0.4.16 to 0.4.17
Bumps [log](https://github.com/rust-lang/log) from 0.4.16 to 0.4.17.
- [Release notes](https://github.com/rust-lang/log/releases)
- [Changelog](https://github.com/rust-lang/log/blob/master/CHANGELOG.md)
- [Commits](https://github.com/rust-lang/log/commits/0.4.17)

---
updated-dependencies:
- dependency-name: log
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-03 01:00:20 +00:00
dependabot[bot]
960a9e0ff7 build: bump libc from 0.2.124 to 0.2.125
Bumps [libc](https://github.com/rust-lang/libc) from 0.2.124 to 0.2.125.
- [Release notes](https://github.com/rust-lang/libc/releases)
- [Commits](https://github.com/rust-lang/libc/compare/0.2.124...0.2.125)

---
updated-dependencies:
- dependency-name: libc
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-02 18:15:25 +00:00
dependabot[bot]
3277c27e0d build: bump serde_derive from 1.0.136 to 1.0.137
Bumps [serde_derive](https://github.com/serde-rs/serde) from 1.0.136 to 1.0.137.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.136...v1.0.137)

---
updated-dependencies:
- dependency-name: serde_derive
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-02 17:27:47 +00:00
dependabot[bot]
691d9b16db build: bump serde from 1.0.136 to 1.0.137
Bumps [serde](https://github.com/serde-rs/serde) from 1.0.136 to 1.0.137.
- [Release notes](https://github.com/serde-rs/serde/releases)
- [Commits](https://github.com/serde-rs/serde/compare/v1.0.136...v1.0.137)

---
updated-dependencies:
- dependency-name: serde
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-02 15:52:41 +00:00
dependabot[bot]
938b0bfcec build: bump serde_json from 1.0.79 to 1.0.80
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.79 to 1.0.80.
- [Release notes](https://github.com/serde-rs/json/releases)
- [Commits](https://github.com/serde-rs/json/compare/v1.0.79...v1.0.80)

---
updated-dependencies:
- dependency-name: serde_json
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-02 13:13:26 +00:00
dependabot[bot]
b60e6f7cb1 build: bump thiserror from 1.0.30 to 1.0.31
Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.30 to 1.0.31.
- [Release notes](https://github.com/dtolnay/thiserror/releases)
- [Commits](https://github.com/dtolnay/thiserror/compare/1.0.30...1.0.31)

---
updated-dependencies:
- dependency-name: thiserror
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2022-05-02 09:53:42 +00:00
Sebastien Boeuf
6df8f0bbf3 virtio-devices: iommu: Report request error back to guest
Improve the request parsing/handling code by allowing an error status to
be returned back to the guest driver before we return an error
internally.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2022-04-26 13:07:32 +02:00