Because we don't always reach the expected footprint improvements with
KSM, let's review the numbers. By reducing the expectations and
increasing the amount of pages to scan, this should stabilize the CI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To reflect updated clippy rules:
error: `if` chain can be rewritten with `match`
--> vmm/src/device_manager.rs:1508:25
|
1508 | / if ret > 0 {
1509 | | debug!("MSI message successfully delivered");
1510 | | } else if ret == 0 {
1511 | | warn!("failed to deliver MSI message, blocked by guest");
1512 | | }
| |_________________________^
|
= note: `-D clippy::comparison-chain` implied by `-D warnings`
= help: Consider rewriting the `if` chain to use `cmp` and `match`.
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#comparison_chain
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Address updated clippy errors:
error: redundant clone
--> vmm/src/device_manager.rs:699:32
|
699 | .insert(acpi_device.clone(), 0x3c0, 0x4)
| ^^^^^^^^ help: remove this
|
= note: `-D clippy::redundant-clone` implied by `-D warnings`
note: this value is dropped without further use
--> vmm/src/device_manager.rs:699:21
|
699 | .insert(acpi_device.clone(), 0x3c0, 0x4)
| ^^^^^^^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_clone
error: redundant clone
--> vmm/src/device_manager.rs:737:26
|
737 | .insert(i8042.clone(), 0x61, 0x4)
| ^^^^^^^^ help: remove this
|
note: this value is dropped without further use
--> vmm/src/device_manager.rs:737:21
|
737 | .insert(i8042.clone(), 0x61, 0x4)
| ^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_clone
error: redundant clone
--> vmm/src/device_manager.rs:754:29
|
754 | .insert(cmos.clone(), 0x70, 0x2)
| ^^^^^^^^ help: remove this
|
note: this value is dropped without further use
--> vmm/src/device_manager.rs:754:25
|
754 | .insert(cmos.clone(), 0x70, 0x2)
| ^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_clone
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We use the version that's included in the linux-loader crate. This old
version was also generating build errors after updating to the new
clippy:
e.g.:
error: unsafe function's docs miss `# Safety` section
--> arch_gen/src/x86/bootparam.rs:23:5
|
23 | / pub unsafe fn as_ptr(&self) -> *const T {
24 | | ::std::mem::transmute(self)
25 | | }
| |_____^
|
= note: `-D clippy::missing-safety-doc` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#missing_safety_doc
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This patch has been cherry-picked from the Firecracker tree. The
reference commit is 1db04ccc69862f30b7814f30024d112d1b86b80e.
Changed the host-initiated vsock connection protocol to include a
trivial handshake.
The new protocol looks like this:
- [host] CONNECT <port><LF>
- [guest/success] OK <assigned_host_port><LF>
On connection failure, the host host connection is reset without any
accompanying message, as before.
This allows host software to more easily detect connection failures, for
instance when attempting to connect to a guest server that may have not
yet started listening for client connections.
Signed-off-by: Dan Horobeanu <dhr@amazon.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch is to check if block device is readonly
when backend set readonly=true.
The lsblk command can show the RO value in the guest.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
The current backend only support rw, and we also need
add readonly support.
The new command:
vhost_user_blk \
--backend "image=/home/test.img, \
sock=/home/path/vhost.socket, \
readonly=true"
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
When the running OS has been told that a CPU should be removed it will
shutdown the CPU and then signal to the hypervisor via the "_EJ0" method
on the device that ultimately writes into an I/O port than the vCPU
should be shutdown. Upon notification the hypervisor signals to the
individual thread that it should shutdown and waits for that thread to
end.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Allow the resizing of the number of vCPUs to less than the current
active vCPUs. This does not currently remove them from the system but
the kernel will take them offline.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When we add a vCPU set an "inserting" boolean that is exposed as an ACPI
field that will be checked for and reset when the ACPI GED notification
for CPU devices happens.
This change is a precursor for CPU unplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Continue to notify on all vCPUs but instead separate the notification
functionality into two methods, CSCN that walks through all the CPUs
and CTFY which notifies based on the numerical CPU id. This is an
interim step towards only notifying on changed CPUs and ultimately CPU
removal.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The goal here is to ensure that CLI and OpenAPI both behave as closely
as possible, and also that they behave as expected.
Leveraging the reorganization of the code, we can now compare two
VmConfig structures generated from one CLI entry on one side, and from
an OpenAPI entry (JSON payload) on the other side.
Fixes#535
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for the writing of unit tests comparing two VmConfig
structures, this commit derives the PartialEq trait for VmConfig and
all embedded structures.
This patch also derives the Debug trait for the same set of structures
so that we can print them to facilitate debugging.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The OpenAPI should not have to provide a command line since the CLI
considers the command line as an empty string if nothing is provided.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This brings more modularity to the code, which will be helpful when we
will later test the CLI and OpenAPI generate the same VmConfig output.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
On our CI the /tmp filesystem is mounted as tmpfs and this is the
location where the test disk images are located. When the CI worker
nodes have less memory and fewer CPUs the tmpfs fills up as the tests
run in parallel.
Introduce a mechanism to reduce the parallelism of the tests based on
starvation of the tmpfs disk availability.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The vsock packets that we're building are resolving guest addresses to
host ones and use the latter as raw pointers.
If the corresponding guest mapped buffer spans across several regions in
the guest, they will do so in the host as well. Since we have no
guarantees that host regions are contiguous, it may lead the VMM into
trying to access memory outside of its memory space.
For now we fix that by ensuring that the guest buffers do not span
across several regions. If they do, we error out.
Ideally, we should enhance the rust-vmm memory model to support safe
acces across host regions.
Fixes CVE-2019-18960
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Highlight that we support Ubuntu Bionic and Eoan as well as Clear Linux
and update the Clear Linux versions referenced.
Also update the firmware URL to point to the latest version.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Virtio-fs maintainers recently updated the virtiofsd daemon through
their official branch on Gitlab. It includes fixes that were needed for
cloud-hypervisor to work correctly with it.
Jenkinsfile needs to be updated since the virtiofsd build requires both
libseccomp and libcap-ng to be present on the system.
One thing to notice, because the latest branch introduced a change
regarding libfuse behavior, the counterpart patch has been added to the
custom kernel branch "virtio-fs-virtio-iommu".
Fixes#536
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since the Snapshotable placeholder and Migratable traits are provided as
well, the DeviceManager object and all its objects are now Migratable.
All Migratable devices are tracked as Arc<Mutex<dyn Migratable>>
references.
Keeping track of all migratable devices allows for implementing the
Migratable trait for the DeviceManager structure, making the whole
device model potentially migratable.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Due to the amount of code currently duplicated across vhost-user devices,
the stats for this commit is on the large side but it's mostly more
duplicated code, unfortunately.
Migratable and Snapshotable placeholder implementations are provided as
well, making all vhost-user devices Migratable.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Due to the amount of code currently duplicated across virtio devices,
the stats for this commit is on the large side but it's mostly more
duplicated code, unfortunately.
Migratable and Snapshotable placeholder implementations are provided as
well, making all virtio devices Migratable.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Migratable devices can be virtio or legacy devices.
In any case, they can potentially be tracked through one of the IO bus
as an Arc<Mutex<dyn BusDevice>>. In order for the DeviceManager to also
keep track of such devices as Migratable trait objects, they must be
shared as mutable atomic references, i.e. Arc<Mutex<T>>. That forces all
Migratable objects to be tracked as Arc<Mutex<dyn Migratable>>.
Virtio devices are typically migratable, and thus for them to be
referenced by the DeviceManager, they now should be built as
Arc<Mutex<VirtioDevice>>.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The anyhow crate generates some incorrectly indented code from its
build.rs code. We don't want to run cargo fmt on this code.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The Migratable trait groups all expected capabilities of devices and
components that can be migrated.
For a component to be migrated, it must be able to pause and resume.
Once paused, it should be able to provide a snapshot of itself. It
should also be able to restore itself from a snaphot.
As a consequence, the Migratable trait will be split between the
Pausable and the Snapshotable traits. This commit only adds the
Pausable one.
All migratable devices will be tracked from the DeviceManager.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The FsConfig structure has been recently adjusted so that the default
value matches between OpenAPI and CLI. Unfortunately, with the current
description, there is no way from the OpenAPI to describe a cache_size
value "None", so that DAX does not get enabled. Usually, using a Rust
"Option" works because the default value is None. But in this case, the
default value is Some(8G), which means we cannot describe a None.
This commit tackles the problem, introducing an explicit parameter
"dax", and leaving "cache_size" as a simple u64 integer.
This way, the default value is dax=true and cache_size=8G, but it lets
the opportunity to disable DAX entirely with dax=false, which will
simply ignore the cache_size value.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the CLI and the HTTP API behave the same regarding the
VhostUserBlkConfig structure, this patch defines some default values
for num_queues, queue_size and wce.
num_queues is 1, queue_size is 128 and wce is true.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the CLI and the HTTP API behave the same regarding the
VhostUserNetConfig structure, this patch defines some default values
for num_queues, queue_size and mac.
num_queues is 2 since that's a pair of TX/RX queues, queue_size is 256
and mac is a randomly generated value.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We want to set different default configurations for vhost-user-net and
vhost-user-blk, which is the reason why the common part corresponding to
the number of queues and the queue size cannot be embedded.
This prepares for the following commit, matching API and CLI behaviors.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
