There's no need to delegate the resize operation to the virtio-balloon
thread. This can come directly from the vmm thread which will use the
Balloon object to update the VIRTIO configuration and trigger the
interrupt for the guest to be notified.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Update the implementation of the process_queue() function to match all
other virtio devices implementations. This solves some issue related to
potential out-of-bound accesses to the former used_desc_heads list.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Multiple rust-vmm crates must be updated at once given the vm-memory one
has been updated and they all rely on vm-memory.
- vm-memory from 0.8.0 to 0.9.0
- vhost from 0.4.0 to 0.5.0
- virtio-queue from 0.5.0 to 0.6.0
- vhost-user-backend from 0.6.0 to 0.7.0
- linux-loader from 0.4.0 to 0.5.0
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It provides fuzzer a reliable way to wait for a sequence of events
to complete for virtio-devices while not using a fixed timeout to
maintain the full speed of fuzzing.
Take virtio-block as an example, the 'queue event' with a valid
available queue setup can trigger a 'completion event'. This is a
meaningful virtio-block code path of processing guest inputs which is
our target for fuzzing virtio devices.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Through multiple changes, this patch aims at providing a reliable
solution for detecting the state of the PTY's connection. Being able to
find out when the other end of the PTY is connected is essential to
prevent the loss of data being output through the PTY. When the PTY
isn't connected, the output is buffered through the SerialBuffer, the
same solution that was created for the serial port initially.
Fixes#4521
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extending and improving both the structure and the trait allows for more
flexibility regarding what can be achieved with the epoll loop. It
allows for a timeout to be configured instead of the default blocking
behavior. There is a new method in the trait to notify the caller that
the timeout has been reached. And there's a new knob to be notified with
the full list of events before the internal code will actually loop over
every event.
All of these new features are not affecting the previous behavior, and
using EpollHelper::run() should be unchanged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reads from the random file may only be partial, e.g., if the random file is an ordinary text
file. When that happens, the device needs to signal to the driver that only parts of the buffer have
been overwritten.
Signed-off-by: Markus Napierkowski <markus.napierkowski@cyberus-technology.de>
Remove the use of 'unwrap()' that assumes the guest address for request
status is always valid, which avoid virtio-block thread panic on
malformed descriptors from the guest.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Some dependencies are not tracking the latest version in the .toml file
so update all dependencies to the latest version.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that we rely on pop_descriptor_chain() rather than iter() to iterate
over a queue, there's no more borrow on the queue itself, meaning we can
invoke add_used() directly for the iteration loop. This simplifies the
processing of the queues for each virtio device, and bring some possible
performance improvement given we don't have to iterate twice over the
list of descriptors to invoke add_used().
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Using pop_descriptor_chain() is much more appropriate than iter() since
it recreates the iterator every time, avoiding the queue to be borrowed
and allowing the virtio-net implementation to match all the other ones.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The new virtio-queue version introduced some breaking changes which need
to be addressed so that Cloud Hypervisor can still work with this
version.
The most important change is about removing a handle to the guest memory
from the Queue, meaning the caller has to provide the guest memory
handle for multiple methods from the QueueT trait.
One interesting aspect is that QueueT has been widely extended to
provide every getter and setter we need to access and update the Queue
structure without having direct access to its internal fields.
This patch ports all the virtio and vhost-user devices to this new crate
definition. It also updates both vhost-user-block and vhost-user-net
backends based on the updated vhost-user-backend crate. It also updates
the fuzz directory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Whenever a virtio reset happens, the vhost-user backend should be
notified that the vring should be stopped. This is performed by calling
GET_VRING_BASE on the appropriate queue indexes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Rather than relying on the amount of queues to enable or disable the
queue that have been activated, we rely on the actual queue indexes
provided through the tuple including the queue index, the Queue and the
EventFd. By storing the list of indexes, we simplify the code and also
make it more accurate in case some queues aren't activated.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of passing separately a list of Queues and the equivalent list
of EventFds, we consolidate these two through a tuple along with the
queue index.
The queue index can be very useful if looking for the actual index
related to the queue, no matter if other queues have been enabled or
not.
It's also convenient to have the EventFd associated with the Queue so
that we don't have to carry two lists with the same amount of items.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When preparing the activator, we must provide the correct queue index to
clone the right EventFd associated with the queue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's not mandatory for the virtio-fs driver to enable all virtqueues
provided by the backend since all it needs is one request queue to work
correctly. Therefore we lower the minimal amount of enabled queues to 1.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
And along with virtio-queue, we must also bump vhost-user-backend from
0.3.0 to 0.5.0 (since it relies on virtio-queue 0.4.0).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The vhost-user backend was always provided the maximum queue size but
this is incorrect. Instead it must be informed of the actual queue size
that has been negotiated with the virtio driver running in the guest.
This ensures proper functioning of vhost-user-block with the Rust
Hypervisor Firmware, which uses a hardcoded queue size of 16.
Partially fixes#4285
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The latest vhost-user specification describes VHOST_USER_RESET_OWNER
command as deprecated with the following explanation:
This is no longer used. Used to be sent to request disabling all
rings, but some back-ends interpreted it to also discard connection
state (this interpretation would lead to bugs). It is recommended that
back-ends either ignore this message, or use it to disable all rings.
Also, it's been observed that when using either Rust Hypervisor Firmware
or EDK2 OVMF firmware with SPDK (using the block device as the boot
disk), the virtio reset that happens when the firmware no longer needs
to access the block device caused a failure by triggering the command
VHOST_USER_RESET_OWNER.
For all these reasons, this patch simplifies the virtio reset
implementation by simply disabling the virtqueues and no longer calling
into VHOST_USER_RESET_OWNER.
Partially fixes#4285
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This check is new in the beta version of clippy and exists to avoid
potential deadlocks by highlighting when the test in an if or for loop
is something that holds a lock. In many cases we would need to make
significant refactorings to be able to pass this check so disable in the
affected crates.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: accessing first element with `data.get(0)`
--> virtio-devices/src/transport/pci_device.rs:1055:34
|
1055 | if let Some(v) = data.get(0) {
| ^^^^^^^^^^^ help: try: `data.first()`
|
= note: `#[warn(clippy::get_first)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#get_first
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: you are deriving `PartialEq` and can implement `Eq`
--> vmm/src/serial_manager.rs:59:30
|
59 | #[derive(Debug, Clone, Copy, PartialEq)]
| ^^^^^^^^^ help: consider deriving `Eq` as well: `PartialEq, Eq`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to ensure that the virtio device thread is spawned from the vmm
thread we use an asynchronous activation mechanism for the virtio
devices. This change optimises that code so that we do not need to
iterate through all virtio devices on the platform in order to find the
one that requires activation. We solve this by creating a separate short
lived VirtioPciDeviceActivator that holds the required state for the
activation (e.g. the clones of the queues) this can then be stored onto
the device manager ready for asynchronous activation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This reverts commit f160572f9d.
There has been increased flakiness around the live migration tests since
this was merged. Speculatively reverting to see if there is increased
stability.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to ensure that the virtio device thread is spawned from the vmm
thread we use an asynchronous activation mechanism for the virtio
devices. This change optimises that code so that we do not need to
iterate through all virtio devices on the platform in order to find the
one that requires activation. We solve this by creating a separate short
lived VirtioPciDeviceActivator that holds the required state for the
activation (e.g. the clones of the queues) this can then be stored onto
the device manager ready for asynchronous activation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Latest cargo beta version raises warnings about unused macro rules.
Simply remove them to fix the beta build.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is no need to include serde_derive separately,
as it can be specified as serde feature instead.
Signed-off-by: Maksym Pavlenko <pavlenko.maksym@gmail.com>
Rely on the newly added helper from vm-virtio crate to keep cloning the
list of Queue structures.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Improve the request parsing/handling code by allowing an error status to
be returned back to the guest driver before we return an error
internally.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extend the Domain structure to store the information about each domain
being in bypass mode or not. Based on this new information, the address
translation of the virtio devices is performed according to the bypass
mode of each domain. And both MAP/UNMAP requests are generating errors
in case the domain has been previously set to bypass mode.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for associating more than mappings with a domain, we
factorize the list of mappings associated with a domain behind a
dedicated Domain structure. We also update the field name so that it
reads better in the code.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Exposing the VIRTIO_IOMMU_F_BYPASS_CONFIG feature to the guest, which
allows to update the bypass global knob through virtio configuration.
Based on the value of this global knob, the address translations for
endpoints that have not been added to a domain is allowed with a simple
identity mapping.
By default, we enable the bypass mode for all endpoints that are not
attached to any domain.
Fixes#3987
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the VIRTIO specification, we must be able to support multiple
endpoints per domain. This is fixed along with the introduction of some
simplification regarding how we can retrieve the external mapping
directly based on the endpoint.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If the guest has not activated the virtio-mem device then reject an
attempt to resize using it.
Fixes: #4001
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
