The firmware has been recently updated to find the EFI partition, no
matter if the disk is not the first one of the list.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch introduces a specific documentation for the virtual IOMMU
device. This is important to understand what the use cases are for this
new device and how to properly use it with virtio devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit is the glue between the virtio-pci devices attached to the
vIOMMU, and the IORT ACPI table exposing them to the guest as sitting
behind this vIOMMU.
An important thing is the trait implementation provided to the virtio
vrings for each device attached to the vIOMMU, as they need to perform
proper address translation before they can access the buffers.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-vsock device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-console device should be attached to
this virtual IOMMU or not. That's why we introduce an extra option
"iommu" with the value "on" or "off". By default, the device is not
attached, which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-pmem device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-rng device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-net device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Having the virtual IOMMU created with --iommu is one thing, but we also
need a way to decide if a virtio-blk device should be attached to this
virtual IOMMU or not. That's why we introduce an extra option "iommu"
with the value "on" or "off". By default, the device is not attached,
which means "iommu=off".
One side effect of this new option is that we had to introduce a new
option for the disk path, simply called "path=".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a simple iommu boolean field to the VmConfig structure so that we
can later use it to create a virtio-iommu device for the current VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtual IOMMU exposed through virtio-iommu device has a dependency
on ACPI. It needs to expose the device ID of the virtio-iommu device,
and all the other devices attached to this virtual IOMMU. The IDs are
expressed from a PCI bus perspective, based on segment, bus, device and
function.
The guest relies on the topology description provided by the IORT table
to attach devices to the virtio-iommu device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch introduces the first implementation of the virtio-iommu
device. This device emulates an IOMMU for the guest, which allows
special use cases like nesting passed through devices, or even using
IOVAs from the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case some virtio devices are attached to the virtual IOMMU, their
vring addresses need to be translated from IOVA into GPA. Otherwise it
makes no sense to try to access them, and they would cause out of range
errors.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding virtio feature VIRTIO_F_IOMMU_PLATFORM when explicitly asked by
the user. The need for this feature is to be able to attach the virtio
device to a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding virtio feature VIRTIO_F_IOMMU_PLATFORM when explicitly asked by
the user. The need for this feature is to be able to attach the virtio
device to a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding virtio feature VIRTIO_F_IOMMU_PLATFORM when explicitly asked by
the user. The need for this feature is to be able to attach the virtio
device to a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding virtio feature VIRTIO_F_IOMMU_PLATFORM when explicitly asked by
the user. The need for this feature is to be able to attach the virtio
device to a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding virtio feature VIRTIO_F_IOMMU_PLATFORM when explicitly asked by
the user. The need for this feature is to be able to attach the virtio
device to a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding virtio feature VIRTIO_F_IOMMU_PLATFORM when explicitly asked by
the user. The need for this feature is to be able to attach the virtio
device to a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this vhost-user-fs implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind it
to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this vhost-user-net implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind it
to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this virtio-console implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind it
to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this virtio-vsock implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind
it to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this virtio-pmem implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind
it to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this virtio-rng implementation. The reason it is needed
is to support unbinding this device from the guest driver, and rebind
it to vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The virtio specification defines a device can be reset, which was not
supported by this virtio-net implementation. The reason it is needed is
to support unbinding this device from the guest driver, and rebind it to
vfio-pci driver.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As of commit 2b94334a, Firecracker includes all the changes we need.
We can now switch to using it instead of carrying a copy.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We used to have errors definitions spread across vmm, vm, api,
and http.
We now have a cleaner separation: All API routines only return an
ApiResult. All VM operations, including the VMM wrappers, return a
VmResult. This makes it easier to carry errors up to the HTTP caller.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to support further use cases where a VM configuration could be
modified through the HTTP API, we only store the passed VM config when
being asked to create a VM. The actual creation will happen when booting
a new config for the first time.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Use a more idiomatic "let Ok(foo) = result" construct for:
105 | if try_numeric.is_ok() {
| ------------------- the check is happening here
106 | self.content_length = try_numeric.unwrap();
| ^^^^^^^^^^^^^^^^^^^^
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We use the serde crate to serialize and deserialize the VmVConfig
structure. This structure will be passed from the HTTP API caller as a
JSON payload and we need to deserialize it into a VmConfig.
For a convenient use of the HTTP API, we also provide Default traits
implementations for some of the VmConfig fields (vCPUs, memory, etc...).
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The linux_loader crate Cmdline struct is not serializable.
Instead of forcing the upstream create to carry a serde dependency, we
simply use a String for the passed command line and build the actual
CmdLine when we need it (in vm::new()).
Also, the cmdline offset is not a configuration knob, so we remove it.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
They point to a vm_virtio structure (VhostUserConfig) and in order to
make the whole config serializable (through the serde crate for
example), we'd have to add a serde dependency to the vm_virtio crate.
Instead we use a local, serializable structure and convert it to
VhostUserConfig from the DeviceManager code.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The kernel path was the only mandatory command line option.
With the addition of the --api-socket option, we can run without a
kernel path and get it later through the API.
Since we can end up with VM configurations that are no longer valid by
default, we need to provide a validation check for it. For now, if the
kernel path is not defined, the VM configuration is invalid.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The API server will unconditionally run through a UNIX domain socket
which default path is /run/user/<uid>/cloud-hypervisor.<pid>.
The --api-socket command line option allows to override that default
value with some custom socket path.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
