If a new build request for master comes in don't cancel the older
builds. Cancelling older builds is very useful for PRs that are being
updated but less so for a build of the master branch that has been
triggered via a merge or a periodic build.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
For cases where IOMMU is not supported, iommu_group will be no present.
This could happened because IOMMU is off at kernel level, bios level or
is not supported at all.
Instead of fail with a generic error handle it as different use case:
Before:
ReadLink(Os { code: 2, kind: NotFound, message: "No such file or directory"})
After:
VfioNoIommuGroup("/sys/bus/pci/devices/0000:03:00.0/iommu_group")
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
Replace sudo invocations of bash creating a subshell with simpler
solutions by running the program directly on the input or using tee.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As part of bringing the tests up with virtio-mmio the virtio-fs were
wrongly disabled. Re-enable them and remove the cache size check as the
cache does not appear in /proc/iomem on virtio-mmio.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When booting from vhost-user-block the entropy is sometimes lower
triggering a flaky test. We have already use other, more reliable
methods for checking that the VM has booted.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The Vm structure was used to store a strong reference to the IO bus.
This is not needed anymore since the AddressManager is logically the
one holding this strong reference. This has been made possible by the
introduction of Weak references on the Bus structure itself.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the BusDevice devices are stored as Weak references by the
IO and MMIO buses, there's no need to use Weak references from the
DeviceManager anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the BusDevice devices are stored as Weak references by the
IO and MMIO buses, there's no need to use Weak references from the
CpuManager anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the BusDevice devices are stored as Weak references by the IO
and MMIO buses, there's no need to use Weak references from the PciBus
anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By storing a list of Weak references to BusDevice devices, the Bus
structure prevents potential cyclic dependencies from happening on
strong references.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The point is to make sure the DeviceManager holds a strong reference of
each BusDevice inserted on the IO and MMIO buses. This will allow these
buses to hold Weak references onto the BusDevice devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The method add_vfio_device() from the DeviceManager needs to be mutable
if we want later to be able to update some internal fields from the
DeviceManager from this same function.
This commit simply takes care of making the necessary changes to change
this function as mutable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's more logical to name the field referring to the DeviceManager as
"device_manager" instead of "devices".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit extends the existing test_vfio by hotplugging an extra
virtio-net device to the L2 VM. The test for validating the hotplug
succeeded is the same as the one to verify the non-hotplugged devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By inserting the DeviceManager on the IO bus, we introduced some cyclic
dependency:
DeviceManager ---> AddressManager ---> Bus ---> BusDevice
^ |
| |
+---------------------------------------------+
This cycle needs to be broken by inserting a Weak reference instead of
an Arc (considered as a strong reference).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Ensures the configuration is updated after a new device has been
hotplugged. In the event of a reboot, this means the new VM will be
started with the new device that had been previously hotplugged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit finalizes the VFIO PCI hotplug support, based on all the
previous commits preparing for it.
One thing to notice, this does not support vIOMMU yet. This means we can
hotplug VFIO PCI devices, but we cannot attach them to an existing or a
new virtio-iommu device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This factorization is very important as it will allow both the standard
codepath and the VFIO PCI hotplug codepath to rely on the same function
to perform the addition of a new VFIO PCI device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Whenever the user wants to hotplug a new VFIO PCI device, the VMM will
have to trigger a hotplug notification through the GED device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces the new command "add-device" that will let a user
hotplug a VFIO PCI device to an already running VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Through the BusDevice implementation from the DeviceManager, and by
inserting the DeviceManager on the IO bus for a specific IO port range,
the VMM now has the ability to handle PCI device hotplug.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation of inserting the DeviceManager on the IO/MMIO buses,
the DeviceManager must implement the BusDevice trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Expands the existing GED device description in the DSDT table. A new
case of hotplug notification is being added to the already existing CPU
and memory hotplug. The third case of hotplug being the addition/removal
of a PCI device, it is identified through the flag 0x4.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Create a small method that will perform both hotplug of all the devices
identified by PCIU bitmap, and then perform the hotunplug of all the
devices identified by the PCID bitmap.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The _EJ0 method provides the guest OS a way to notify the VMM that the
device has been properly ejected from the guest OS. Only after this
point, the VMM can fully remove the device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This new PHPR device in the DSDT table introduces some specific
operation regions and the associated fields.
PCIU stands for "PCI up", which identifies PCI devices that must be
added.
PCID stands for "PCI down", which identifies PCI devices that must be
removed.
B0EJ stands for "Bus 0 eject", which identifies which device on the bus
has been ejected by the guest OS.
Thanks to these fields, the VMM and the guest OS can communicate while
performing hotplug/hotunplug operations.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adds the DVNT method to the PCI0 device in the DSDT table. This new
method is responsible for checking each slot and notify the guest OS if
one of the slots is supposed to be added or removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces the ACPI support for describing the 32 device
slots attached to the main PCI host bridge.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that virtio-mmio transport has support for SHM regions we should be
able to test virtio-fs against it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The details of the SHM regions or the lack of, which is used by
virtio-fs DAX, is communicated through configuration fields on the
virtio-mmio memory region. Implement the necessary fields to return the
SHM entries and in particular return a length of (u64)-1 which is used
by the kernel to indicate there are no SHM regions.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
