If we do not need an anonymous file backing the memory then do not
create one.
As a side effect this addresses an issue with CoW (mmap with MAP_PRIVATE
but no MAP_ANONYMOUS) when the memory is pinned for VFIO.
Fixes: #4805
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
After testing, io_uring_is_supported() causes about 38ms of
overhead when creating virtio-blk. By modifying the position
of io_uring_is_supported(), the overhead of creating virtio-blk
is reduced to less than 1ms when we close io_uring.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Until there is a need for sharing the memory fd with a child process, we
should err on the safe side to close it on exec.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Following the new design proposal to improve the restore codepath when
migrating a VM, all virtio devices are supplied with an optional state
they can use to restore from. The restore() implementation every device
was providing has been removed in order to prevent from going through
the restoration twice.
Here is the list of devices now following the new restore design:
- Block (virtio-block)
- Net (virtio-net)
- Rng (virtio-rng)
- Fs (vhost-user-fs)
- Blk (vhost-user-block)
- Net (vhost-user-net)
- Pmem (virtio-pmem)
- Vsock (virtio-vsock)
- Mem (virtio-mem)
- Balloon (virtio-balloon)
- Watchdog (virtio-watchdog)
- Vdpa (vDPA)
- Console (virtio-console)
- Iommu (virtio-iommu)
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The add_device() function, from the device manager code, takes a
DeviceConfig as a parameter, instead of a VmAddDevice.
The change was originally done as part of 34412c9b41 and it didn't
break Kata Containers because the VmAddDevice and DeviceConfig structs
share most of their fields, besides the optional for serialization
`pci_segment`, which is not used by the client yet.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This is preliminary work to ensure a migrated VM is created right before
it is restored. This will be useful when moving to a design where the VM
is both created and restored simultaneously from the Snapshot.
In details, that means the MemoryManager is the object that must be
created upon receiving the config from the source VM, so that memory
content can be later received and filled into the GuestMemory.
Only after these steps happened, the snapshot is received from the
source VM, and the actual Vm object can be created from both the
snapshot and the MemoryManager previously created.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
These look alarming if you are booting with the a distro kernel which is
now a recommended approach.
See: #4786
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The restore path of MemoryManager is handled specially without
implementing a `Snapshottable:restore()`. Removing the explicit call to
it along the migration code path to avoid confusions.
See: #4783
Signed-off-by: Bo Chen <chen.bo@intel.com>
Vdpa now implements the Migratable trait, which allows the device to be
added to the DeviceTree and therefore allows live migrating any vDPA
device that supports being suspended.
Given a vDPA device can't be resumed from a suspended state without
having to reset everything, we don't support pause/resume for a vDPA
device, as well as snapshot/restore (which requires resume to be
supported).
In order for the migration to work locally, reusing the same device on
the same host machine, the vhost-vdpa handler is dropped after the
snapshot has been performed, which allows the destination VM to open the
device without any conflict about the device being busy.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding VHOST_VDPA_GET_CONFIG_SIZE and VHOST_VDPA_SUSPEND to the list of
authorized ioctls for the vmm thread.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we have all functions related to generate default values of
vm-config structs in the same location.
Signed-off-by: Bo Chen <chen.bo@intel.com>
These have been replaced by members of PayloadConfig and should be
removed in v28.0 (mentioned in v26.0 release notes.)
Fixes: #4737
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is consistent when considering that some structs have a
`#[derive(Default)`] so it makes sense for the default implementations
to be in the same location.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Place the data structures that are required for constructing a VmConfig
into it's own module from the logic that exists to suppot them.
This is useful as a consumer of the API can now clearly see what data
structures make up the API for creating VMs.
This has no functional change and I made no attempt to clean up the
ordering (it's as in the original file) nor any other clean up.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Bumps [clap](https://github.com/clap-rs/clap) from 3.2.22 to 4.0.9.
- [Release notes](https://github.com/clap-rs/clap/releases)
- [Changelog](https://github.com/clap-rs/clap/blob/master/CHANGELOG.md)
- [Commits](clap-rs/clap@v3.2.22...v4.0.9)
---
updated-dependencies:
- dependency-name: clap
dependency-type: direct:production
update-type: version-update:semver-major
...
Moving to the major version 4 introduced some breaking changes which had
to be handled manually.
Fixes#4709
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This option is needed for the openapi consumer (e.g. Kata Containers) to
load firmware (e.g. td-shim) for booting.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This simplifies the CI process but also logical with the existing
functionality under "guest_debug" (dumping guest memory).
Fixes: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding the support for the user to set the MTU for the vhost-user-net
backend, which allows the integration test to be extended with the test
of the MTU parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adjust MTU logic such that:
1. Apply an MTU to the TAP interface if the user supplies it
2. Always query the TAP interface for the MTU and expose that.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This simplifes the buld and checks with very little overhead and the
fwdebug device is I/O port device on 0x402 that can be used by edk2 as a
very simple character device.
See: #4679
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add tracing of the VM boot sequence from the point at which the request
to create a VM is received to the hand-off to the vCPU threads running.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a new feature "tracing" that enables tracing functionality via the
"tracer" crate (sadly features and crates cannot share the same name.)
Setup: tracer::start()
The main functionality is a tracer::trace_scope()! macro that will add
trace points for the duration of the scope. Tracing events are per
thread.
Finish: tracer::end() this will write the trace file (pretty printed
JSON) to a file in the current directory.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a new "mtu" parameter to the NetConfig structure and therefore to
the --net option. This allows Cloud Hypervisor's users to define the
Maximum Transmission Unit (MTU) they want to use for the network
interface that they create.
In details, there are two main aspects. On the one hand, the TAP
interface is created with the proper MTU if it is provided. And on the
other hand the guest is made aware of the MTU through the VIRTIO
configuration. That means the MTU is properly set on both the TAP on the
host and the network interface in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
