Add config parameter to --disk called "_disable_io_uring" (the
underscore prefix indicating it is not for public consumpion.) Use this
option to disable io_uring if it would otherwise be used.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to do this we must extend the MemoryManager API to add the
ability to specify the tracking of the dirty pages when creating the
userspace mappings and also keep track of the userspace mappings that
have been created for RAM regions.
Currently the dirty pages are collected into ranges based on a block
level of 64 pages. The algorithm could be tweaked to create smaller
ranges but for now if any page in the block of 64 is dirty the whole
block is added to the range.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This also removes the need to lookup up the "exe" symlink for finding
the VMM executable path.
Fixes: #1925
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now that we have a new dedicated way of asking for a balloon through the
CLI and the REST API, we can move all the balloon code to the device
manager. This allows us to simplify the memory manager, which is already
quite complex.
It also simplifies the behavior of the balloon resizing command. Instead
of providing the expected size for the RAM, which is complex when memory
zones are involved, it now expects the balloon size. This is a much more
straightforward behavior as it really resizes the balloon to the desired
size. Additionally to the simplication, the benefit of this approach is
that it does not need to be tied to the memory manager at all.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The watchdog device is created through the "--watchdog" parameter. At
most a single watchdog can be created per VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When shutting down a VM using VFIO, the following error has been
detected:
vfio-ioctls/src/vfio_device.rs:312 -- Could not delete VFIO group:
KvmSetDeviceAttr(Error(9))
After some investigation, it appears the KVM device file descriptor used
for removing a VFIO group was already closed. This is coming from the
Rust sequence of Drop, from the DeviceManager all the way down to
VfioDevice.
Because the DeviceManager owns passthrough_device, which is effectively
a KVM device file descriptor, when the DeviceManager is dropped, the
passthrough_device follows, with the effect of closing the KVM device
file descriptor. Problem is, VfioDevice has not been dropped yet and it
still needs a valid KVM device file descriptor.
That's why the simple way to fix this issue coming from Rust dropping
all resources is to make Linux accountable for it by duplicating the
file descriptor. This way, even when the passthrough_device is dropped,
the KVM file descriptor is closed, but a duplicated instance is still
valid and owned by the VfioContainer.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Small patch creating a dedicated `block_io_uring_is_supported()`
function for the non-io_uring case, so that we can simplify the
code in the DeviceManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because of the PCI refactoring that happened in the previous commit
d793cc4da3, the ability to fully remove a
PCI device was altered.
The refactoring was correct, but the usage of a generic function to pass
the same reference for both BusDevice, PciDevice and Any + Send + Sync
causes the Arc::ptr_eq() function to behave differently than expected,
as it does not match the references later in the code. That means we
were not able to remove the device reference from the MMIO and/or PIO
buses, which was leading to some bus range overlapping error once we
were trying to add a device again to the previous range that should have
been removed.
Fixes#1802
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The PMEM support has an option called "discard_writes" which when true
will prevent changes to the device from hitting the backing file. This
is trying to be the equivalent of "readonly" support of the block
device.
Previously the memory of the device was marked as KVM_READONLY. This
resulted in a trap when the guest attempted to write to it resulting a
VM exit (and recently a warning). This has a very detrimental effect on
the performance so instead make "discard_writes" truly CoW by mapping
the memory as `PROT_READ | PROT_WRITE` and using `MAP_PRIVATE` to
establish the CoW mapping.
Fixes: #1795
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Unlike x86_64, the "interrupt_controller" in the device manager
for AArch64 is only a `Gic` object that implements the
`InterruptController` to provide the interrupt delivery service.
This is not the real GIC device so that we do not need to save
its states. Also, we do not need to insert it to the device_tree.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The value of GIC register `GICR_TYPER` is needed in restoring
the GIC states. This commit adds a field in the GIC device struct
and a method to construct its value.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In AArch64 systems, the state of GIC device can only be
retrieved from `KVM_GET_DEVICE_ATTR` ioctl. Therefore to implement
saving/restoring the GIC states, we need to make sure that the
GIC object (either the file descriptor or the device itself) can
be extracted after the VM is started.
This commit refactors the code of GIC creation by adding a new
field `gic_device_entity` in device manager and methods to set/get
this field. The GIC object can be therefore saved in the device
manager after calling `arch::configure_system`.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
If after the creation of the self-spawned backend, the VMM cannot create
the corresponding vhost-user frontend, the VMM must kill the freshly
spawned process in order to ensure the error propagation can happen.
In case the child process would still be around, the VMM cannot return
the error as it waits onto the child to terminate.
This should help us identify when self-spawned failures are caused by a
connection being refused between the VMM and the backend.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a new field to VirtioMemZone structure, as it lets us associate
with a particular virtio-mem region the amount of memory that should be
plugged in at boot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This patch simplifies the code as we have one single Option for the
VirtioMemZone. This also prepares for storing additional information
related to the virtio-mem region.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit gives the possibility to create a virtio-mem device with
some memory already plugged into it. This is preliminary work to be
able to reboot a VM with the virtio-mem region being already resized.
Signed-off-by: Hui Zhu <teawater@antfin.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that virtio-mem device accept a guest NUMA node as parameter, we
retrieve this information from the list of NUMA nodes. Based on the
memory zone associated with the virtio-mem device, we obtain the NUMA
node identifier, which we provide to the virtio-mem device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Implement support for associating a virtio-mem device with a specific
guest NUMA node, based on the ACPI proximity domain identifier.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
For more consistency and help reading the code better, this commit
renames all 'virtiomem*' variables into 'virtio_mem*'.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both MemoryManager and DeviceManager are updated through this commit to
handle the creation of multiple virtio-mem devices if needed. For now,
only the framework is in place, but the behavior remains the same, which
means only the memory zone created from '--memory' generates a
virtio-mem region that can be used for resize.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Extract common code for adding devices to the PCI bus into its own
function from the VFIO and VIRTIO code paths.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This removes the dependency of the pci crate on the devices crate which
now only contains the device implementations themselves.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There will be some cases where the implementation of the snapshot()
function from the Snapshottable trait will require to modify some
internal data, therefore we make this possible by updating the trait
definition with snapshot(&mut self).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It is otherwise seems to be able to cause resource conflicts with
Windows APCI_HAL. The OS might do a better job on assigning resources
to this device, withouth them to be requested explicitly. 0xcf8 and
0xcfc are only what is certainly needed for the PCI device enumeration.
Signed-off-by: Anatol Belski <anatol.belski@microsoft.com>
Some OS might check for duplicates and bail out, if it can't create a
distinct mapping. According to ACPI 5.0 section 6.1.12, while _UID is
optional, it becomes required when there are multiple devices with the
same _HID.
Signed-off-by: Anatol Belski <ab@php.net>
This patch added the seccomp_filter module to the virtio-devices crate
by taking reference code from the vmm crate. This patch also adds
allowed-list for the virtio-block worker thread.
Partially fixes: #925
Signed-off-by: Bo Chen <chen.bo@intel.com>
By adding a new io_uring feature gate, we let the user the possibility
to choose if he wants to enable the io_uring improvements or not.
Since the io_uring feature depends on the availability on recent host
kernels, it's better if we leave it off for now.
As soon as our CI will have support for a kernel 5.6 with all the
features needed from io_uring, we'll enable this feature gate
permanently.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case the host supports io_uring and the specific io_uring options
needed, the VMM will choose the asynchronous version of virtio-blk.
This will enable better I/O performances compared to the default
synchronous version.
This is also important to note the VMM won't be able to use the
asynchronous version if the backend image is in QCOW format.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Cloud Hypervisor allows either the serial or virtio console to output to
TTY, but TTY input is pushed to both.
This is not correct. When Linux guest is configured to spawn TTYs on
both ttyS0 and hvc0, the user effectively issues the same commands twice
in different TTYs.
Fix this by only direct input to the one choice that is using host side
TTY.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This is a counter exposed via an I/O port that runs at 3.579545MHz. Here
we use a hardcoded I/O and expose the details through the FADT table.
TEST=Boot Linux kernel and see the following in dmesg:
[ 0.506198] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We store the device passthrough handler, so we should use it through our
internal API and only carry the passed through device configuration.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
That function is going to return a handle for passthrough related
operations.
Move create_kvm_device code there.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
In this commit we saved the BDF of a PCI device and set it to "devid"
in GSI routing entry, because this field is mandatory for GICv3-ITS.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Move the definition of RawFile from virtio-devices crate into qcow
crate. All the code that consumes RawFile also already depends on the
qcow crate for image file type detection so this change breaks the
need for the qcow crate to depend on the very large virtio-devices
crate.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit store balloon size to MemoryConfig.
After reboot, virtio-balloon can use this size to inflate back to
the size before reboot.
Signed-off-by: Hui Zhu <teawater@antfin.com>
The code is purely for maintaining an internal counter. It is not really
tied to KVM.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
The _fd suffix is KVM specific. But since it now point to an hypervisor
agnostic hypervisor::Vm implementation, we should just rename it vm.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Split the generic virtio code (queues and device type) from the
VirtioDevice trait, transport and device implementations.
This also simplifies the feature handling in vhost_user_backend as the
vm-virtio crate is no longer has any features.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The observation is that the GSI hashmap remains untouched before getting
passed into the MSI interrupt manager. We can create that hashmap
directly in the interrupt manager's new function.
The drops one import from the interrupt module.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
That removes one more KVM-ism in VMM crate.
Note that there are more KVM specific code in those files to be split
out, but we're not at that stage yet.
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Collate the virtio device counters in DeviceManager for each device that
exposes any and expose it through the recently added HTTP API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The same way the VM and the vCPUs are restored in a paused state, all
devices associated with the device manager must be restored in the same
paused state.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When the hypervisor crate was introduced, a few places that handled
errors were commented out in favor of unwrap, but that's bad practice.
Restore proper error handling in those places in this patch.
We cannot use from_raw_os_error anymore because it is wrapped deep under
hypervisor crate. Create new custom errors instead.
Fixes: e4dee57e81 ("arch, pci, vmm: Initial switch to the hypervisor crate")
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Start moving the vmm, arch and pci crates to being hypervisor agnostic
by using the hypervisor trait and abstractions. This is not a complete
switch and there are still some remaining KVM dependencies.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to provide the device name and PCI b/d/f associated with a
freshly hotplugged device, the hotplugging functions from the device
manager return a new structure called PciDeviceInfo.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Screened IO bus because it is not for AArch64.
Enabled Serial, RTC and Virtio devices with MMIO transport option.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This removes the need to use CAP_NET_ADMIN privileges and instead the
host MAC addres is either provided by the user or alternatively it is
retrieved from the kernel.
TEST=Run cloud-hypervisor without CAP_NET_ADMIN permission and a
preconfigured tap device:
sudo ip tuntap add name tap0 mode tap
sudo ifconfig tap0 192.168.249.1 netmask 255.255.255.0 up
cargo clean
cargo build
target/debug/cloud-hypervisor --serial tty --console off --kernel ~/src/rust-hypervisor-firmware/target/target/release/hypervisor-fw --disk path=~/workloads/clear-33190-kvm.img --net tap=tap0
VM was also rebooted to check that works correctly.
Fixes: #1274
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There is a much stronger PCI dependency from vfio_pci.rs than a VFIO one
from pci/src/vfio.rs. It seems more natural to have the PCI specific
VFIO implementation in the PCI crate rather than the other way around.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit only implements the InterruptController crate on AArch64.
The device specific part for GIC is to be added.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
IOAPIC, a X86 specific interrupt controller, is referenced by device
manager and CPU manager. To work with more architectures, a common
type for all architectures is needed.
This commit introduces trait InterruptController to provide architecture
agnostic functions. Device manager and CPU manager can use it without
caring what the underlying device is.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This is a preparing commit to build and test CH on AArch64. All building
issues were fixed, but no functionality was introduced.
For X86, the logic of code was not changed at all.
For ARM, the architecture specific part is still empty. And we applied
some tricks to workaround lint warnings. But such code will be replaced
later by other commits with real functionality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This config option provided very little value and instead we now enable
this feature (which then lets the guest control the cache mode)
unconditionally.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add a new "host_mac" parameter to "--net" and "--net-backend" and use
this to set the MAC address on the tap interface. If no address is given
one is randomly assigned and is stored in the config.
Support for vhost-user-net self spawning was also included.
Fixes: #1177
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
By passing a reference of the DeviceTree to the AddressManager, we can
now update the DeviceTree whenever a PCI BAR is reprogrammed. This is
mandatory to maintain the correct resources information related to each
virtio-pci device, which will ensure correct information will be stored
upon VM snapshot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We want to be able to share the same DeviceTree across multiple threads,
particularly to handle the use case where PCI BAR reprogramming might
need to update the tree while from another thread a new device is being
added to the tree.
That's why this patch moves the DeviceTree instance into an Arc<Mutex<>>
so that we can later share a reference of the same mutable tree with the
AddressManager responsible for handling PCI BAR reprogramming.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By using the vector of resources provided by the DeviceNode, the device
manager can store the information related to PCI BARs from a virtio-pci
device. Based on this, and upon VM restoration, the device manager can
restore the BARs in the expected location in the guest address space.
One thing to note is that we only need to provide the VirtioPciDevice
with the configuration BAR (BAR 0) since the SHaredMemory BAR info comes
from the virtio device directly.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the new field "pci_bdf", a virtio-pci device can be restored at
the same place on the PCI bus it was located before the VM snapshot.
This ensures consistent placement on the PCI bus, based on the stored
information related to each device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Switch to using the recently added OptionParser in the code that parses
the network backend.
Whilst doing this also update the net-backend syntax to use "sock"
rather than socket.
Fixes: #1092
Partially fixes: #1091
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This module will be dedicated to DeviceNode and DeviceTree definitions
along with some dedicated unit tests.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This iterator will let the VMM enumerate the resources associated
with the DeviceManager, allowing for introspection.
Moreover, by implementing a double ended iterator, we can get the
hierarchy from the leaves to the root of the tree, which is very
helpful in the context of restoring the devices in the right order.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that the device tree fully replaced the need for a dedicated list of
migratable devices, this commit cleans up the codebase by removing it
from the DeviceManager.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit switches from migratable_devices to device_tree in order to
restore devices exclusively based on the device tree.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit adds an extra field to the DeviceNode so that the structure
can hold a Migratable device. The long term plan is to be able to remove
the dedicated table of migratable devices, but instead rely only on the
device tree.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to hide the complexity chosen for the device tree stored in
the DeviceManager, we introduce a new DeviceTree structure.
For now, this structure is a simple passthrough of a HashMap, but it can
be extended to handle some DeviceTree specific operations.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
