The information about the identifier related to a Snapshot is only
relevant from the BTreeMap perspective, which is why we can get rid of
the duplicated identifier in every Snapshot structure.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Following the new restore design, it is not appropriate to set every
virtio device threads into a paused state after they've been started.
This is why we remove the line of code pausing the devices only after
they've been restored, and replace it with a small patch in every virtio
device implementation. When a virtio device is created as part of a
restored VM, the associated "paused" boolean is set to true. This
ensures the corresponding thread will be directly parked when being
started, avoiding the thread to be in a different state than the one it
was on the source VM during the snapshot.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Following the new design proposal to improve the restore codepath when
migrating a VM, all virtio devices are supplied with an optional state
they can use to restore from. The restore() implementation every device
was providing has been removed in order to prevent from going through
the restoration twice.
Here is the list of devices now following the new restore design:
- Block (virtio-block)
- Net (virtio-net)
- Rng (virtio-rng)
- Fs (vhost-user-fs)
- Blk (vhost-user-block)
- Net (vhost-user-net)
- Pmem (virtio-pmem)
- Vsock (virtio-vsock)
- Mem (virtio-mem)
- Balloon (virtio-balloon)
- Watchdog (virtio-watchdog)
- Vdpa (vDPA)
- Console (virtio-console)
- Iommu (virtio-iommu)
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Considering error messages will be mostly nested, ensuring no
punctuation at the end will make the error log more readable.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This function is for really for the transport layer to trigger a device
reset. Instead name it appropriately for the fuzzing specific use case.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There's no need to delegate the resize operation to the virtio-balloon
thread. This can come directly from the vmm thread which will use the
Balloon object to update the VIRTIO configuration and trigger the
interrupt for the guest to be notified.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that we rely on pop_descriptor_chain() rather than iter() to iterate
over a queue, there's no more borrow on the queue itself, meaning we can
invoke add_used() directly for the iteration loop. This simplifies the
processing of the queues for each virtio device, and bring some possible
performance improvement given we don't have to iterate twice over the
list of descriptors to invoke add_used().
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Using pop_descriptor_chain() is much more appropriate than iter() since
it recreates the iterator every time, avoiding the queue to be borrowed
and allowing the virtio-net implementation to match all the other ones.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The new virtio-queue version introduced some breaking changes which need
to be addressed so that Cloud Hypervisor can still work with this
version.
The most important change is about removing a handle to the guest memory
from the Queue, meaning the caller has to provide the guest memory
handle for multiple methods from the QueueT trait.
One interesting aspect is that QueueT has been widely extended to
provide every getter and setter we need to access and update the Queue
structure without having direct access to its internal fields.
This patch ports all the virtio and vhost-user devices to this new crate
definition. It also updates both vhost-user-block and vhost-user-net
backends based on the updated vhost-user-backend crate. It also updates
the fuzz directory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of passing separately a list of Queues and the equivalent list
of EventFds, we consolidate these two through a tuple along with the
queue index.
The queue index can be very useful if looking for the actual index
related to the queue, no matter if other queues have been enabled or
not.
It's also convenient to have the EventFd associated with the Queue so
that we don't have to carry two lists with the same amount of items.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Implement the VIRTIO_BALLOON_F_REPORTING feature, indicating to the
guest it can report set of free pages. A new virtqueue dedicated for
receiving the information about the free pages is created. The VMM
releases the memory by punching holes with fallocate() if the guest
memory is backed by a file, and madvise() the host about the ranges of
memory that shouldn't be needed anymore.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding a new parameter free_page_reporting=on|off to the balloon device
so that we can enable the corresponding feature from virtio-balloon.
Running a VM with a balloon device where this feature is enabled allows
the guest to report pages that are free from guest's perspective. This
information is used by the VMM to release the corresponding pages on the
host.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Improving the existing code for better readability and in anticipation
for adding an additional virtqueue for the free page reporting feature.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of relying on the virtio-queue crate to store the information
about the MSI-X vectors for each queue, we handle this directly from the
PCI transport layer.
This is the first step in getting closer to the upstream version of
virtio-queue so that we can eventually move fully to the upstream
version.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the vm-virtio/virtio-queue crate from rust-vmm which has been
copied inside the Cloud Hypervisor tree, the entire codebase is moved to
the new definition of a Queue and other related structures.
The reason for this move is to follow the upstream until we get some
agreement for the patches that we need on top of that to make it
properly work with Cloud Hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Adding the snapshot/restore support along with migration as well,
allowing a VM with a virtio-balloon device attached to be properly
migrated.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce a common solution for spawning the virtio threads which will
make it easier to add the panic handling.
During this effort I discovered that there were no seccomp filters
registered for the vhost-user-net thread nor the vhost-user-block
thread. This change also incorporates basic seccomp filters for those as
part of the refactoring.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We are relying on applying empty 'seccomp' filters to support the
'--seccomp false' option, which will be treated as an error with the
updated 'seccompiler' crate. This patch fixes this issue by explicitly
checking whether the 'seccomp' filter is empty before applying the
filter.
Signed-off-by: Bo Chen <chen.bo@intel.com>
For vhost-user devices, memory should be shared between CLH and
vhost-user backend. However, madvise DONTNEED doesn't working in
this case. So, let's use fallocate PUNCH_HOLE to discard those
memory regions instead.
Signed-off-by: Li Hangjing <lihangjing@bytedance.com>
Sometimes we need balloon deflate automatically to give memory
back to guest, especially for some low priority guest processes
under memory pressure. Enable deflate_on_oom to support this.
Usage: --balloon "size=0,deflate_on_oom=on" \
Signed-off-by: Fei Li <lifei.shirley@bytedance.com>
As the first step to complete live-migration with tracking dirty-pages
written by the VMM, this commit patches the dependent vm-memory crate to
the upstream version with the dirty-page-tracking capability. Most
changes are due to the updated `GuestMemoryMmap`, `GuestRegionMmap`, and
`MmapRegion` structs which are taking an additional generic type
parameter to specify what 'bitmap backend' is used.
The above changes should be transparent to the rest of the code base,
e.g. all unit/integration tests should pass without additional changes.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Add a helper to VirtioCommon which returns duplicates of the EventFds
for kill and pause event.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Now all crates use edition = "2018" then the majority of the "extern
crate" statements can be removed. Only those for importing macros need
to remain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `TYPE_UNKNOWN` contains a capitalized acronym
--> vm-virtio/src/lib.rs:48:5
|
48 | TYPE_UNKNOWN = 0xFF,
| ^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `Type_Unknown`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Even though the driver can provide fewer queues than those advertised
for some device types their is a minimum number that is required for
operation.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than having to give and return the ioeventfd used for a device
clone them each time. This will make it simpler when we start handling
the driver enabling fewer queues than advertised by the device.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to make the thread naming more useful derive their name from
the device id (which can be supplied by the user) and a device specific
suffix that has details of the individual queue (or queue pair.)
e.g.
rob@artemis:~$ pstree -p -c -l -t `pidof cloud-hypervisor`
cloud-hyperviso(27501)─┬─{_console}(27525)
├─{_disk0_q0}(27529)
├─{_disk0_q1}(27532)
├─{_net1_ctrl}(27533)
├─{_net1_qp0}(27534)
├─{_net1_qp1}(27535)
├─{_rng}(27526)
├─{http-server}(27504)
├─{seccomp_signal_}(27502)
├─{signal_handler}(27523)
├─{vcpu0}(27520)
├─{vcpu1}(27522)
└─{vmm}(27503)
Fixes: #2077
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: field assignment outside of initializer for an instance created with Default::default()
--> virtio-devices/src/mem.rs:496:9
|
496 | resp.resp_type = resp_type;
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
note: consider initializing the variable with `mem::VirtioMemResp { resp_type: resp_type, ..Default::default() }` and removing relevant reassignments
--> virtio-devices/src/mem.rs:495:9
|
495 | let mut resp = VirtioMemResp::default();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#field_reassign_with_default
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When a total ordering between multiple atomic variables is not required
then use Ordering::Acquire with atomic loads and Ordering::Release with
atomic stores.
This will improve performance as this does not require a memory fence
on x86_64 which Ordering::SeqCst will use.
Add a comment to the code in the vCPU handling code where it operates on
multiple atomics to explain why Ordering::SeqCst is required.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The virtio-balloon change the memory size is asynchronous.
VirtioBalloonConfig.actual of balloon device show current balloon size.
This commit add memory_actual_size to vm.info to show memory actual size.
Signed-off-by: Hui Zhu <teawater@antfin.com>
In order to simplify the transition to VirtioCommon and to avoid needing
to set empty fields derive Default for VirtioCommon.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As we never join the spawned virtio-devices worker threads, the error
returned from each worker thread is lost. For now, we simply print out
the error from each worker thread.
Fixes: #1551
Signed-off-by: Bo Chen <chen.bo@intel.com>
Using the Rust Barrier mechanism, this patch forces each virtio device
to acknowledge they've been correctly paused before going further.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Instead of passing only the event type through the handle_event()
callback, we make the trait slightly more generic by providing the
epoll event to each virtio device implementation.
This is particularly useful for vsock as it will need the event set.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Migrate to EpollHelper so as to remove code that is duplicated between
multiple virtio devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
