The calls to these functions are always preceded by a call to
InterruptSourceGroup::update(). By adding a masked boolean to that
function call it possible to remove 50% of the calls to the
KVM_SET_GSI_ROUTING ioctl as the the update will correctly handle the
masked or unmasked case.
This causes the ioctl to disappear from the perf report for a boot of
the VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
EDK2 execution requires a flash device at address 0.
The new added device is not a fully functional flash. It doesn't
implement any spec of a flash device. Instead, a piece of memory is used
to simulate the flash simply.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Rust 2021 edition has a few improvements over the 2018 edition. Migrate
the project to 2021 edition by following recommended migration steps.
Luckily, the code itself doesn't require fixing.
Bump MSRV to 1.56 as it is required by the 2021 edition. Also fix the
clap build dependency to make Cloud Hypervisor build again.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This is a refactoring commit to simplify source code.
Removed some functions that only return a layout const.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Some addresses defined in `layout.rs` were of type `GuestAddress`, and
are `u64`. Now align the types of all the `*_START` definitions to
`GuestAddress`.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
The reserved space is for devices.
Some devices (like TPM) require arbitrary addresses close to 4GiB.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
`RAM_64BIT_START` was set to 1 GiB, not a real 64-bit address. Now
rename it `RAM_START` to avoid confusion.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Add a new iommu parameter to VdpaConfig in order to place the vDPA
device behind a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The list of memory resources provided through the HOB wasn't accurate
because of the broken logic. The fix provides correct ranges to the
firmware.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on latest QEMU patches from branch tdx-qemu-2022.03.29-v7.0.0-rc1
we should only report as memory resources the TempMem sections from TDVF
sections.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The introduction of a error if live resizing is not possible is a
regression compared to the original behaviour where the new size would
be stored in the config and reflected in the next boot. This behaviour
was also inconsistent with the effect of resizing with no VM booted.
Instead of generating an error allow the code to go ahead and update the
config so that the new size will be available upon the reboot.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Similarly to the previous commit restricting the cpu resizing error only
to the situations where the vcpu amount has changed, let's do the same
with the memory and be consistent throughout our code base.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
188078467d made clear that resize should
only happen when dealing with a "dynamic" CpuManager. Although this is
very much correct, it causes a regression on Kata Containers (and on any
other consumer of Cloud Hypervisor) in cases where a resize would be
triggered but the vCPUs values wouldn't be changed.
There's no doubt Kata Containers could do better and do not call a
resize in such situations, and that's something that should **also** be
solved there. However, we should also work this around on Cloud
Hypervisor side as it introduces a regression with the current Kata
Containers code.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
By enabling the VIRTIO feature VIRTIO_F_IOMMU_PLATFORM for all
vhost-user devices when needed, we force the guest to use the DMA API,
making these devices compatible with TDX. By using DMA API, the guest
triggers the TDX codepath to share some of the guest memory, in
particular the virtqueues and associated buffers so that the VMM and
vhost-user backends/processes can access this memory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If EFI reset fails on the Linux kernel then it will fallthrough to CMOS
reset. Implement this as one of our reset solutions.
Fixes: #3912
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Compile this feature in by default as it's well supported on both
aarch64 and x86_64 and we only officially support using it (no non-acpi
binaries are available.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
AMX is an x86 extension adding hardware units for matrix
operations (int and float dot products). The goal of the extension is
to provide performance enhancements for these common operations.
On Linux, AMX requires requesting the permission from the kernel prior
to use. Guests wanting to make use of the feature need to have the
request made prior to starting the vm.
This change then adds the first --cpus features option amx that when
passed will enable AMX usage for guests (needs a 5.17+ kernel) or
exits with failure.
The activation is done in the CpuManager of the VMM thread as it
allows migration and snapshot/restore to work fairly painlessly for
AMX enabled workloads.
Signed-off-by: William Douglas <william.douglas@intel.com>
Disable the DAX feature from the virtio-fs implementation as the feature
is still not stable. The feature is deprecated, meaning the 'dax'
parameter will be removed in about 2 releases cycles.
In the meantime, the parameter value is ignored and forced to be
disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When running non-dynamic or with virtio-mem for hotplug the ACPI
functionality should not be included on the DSDT nor does the
MemoryManager need to be placed on the MMIO bus.
Fixes: #3883
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This is now consistent with not supplying the _CRS for the device when
CpuManager is not dynamic.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than just printing a message return an error back through the API
if the user attempts to hotplug a device that supports being behind an
IOMMU where that device isn't placed on an IOMMU segment.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Ensure devices that are specified to be on a PCI segment that is behind
the IOMMU are IOMMU enabled if possible or error out for those devices
that do not support it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Previously it was not possible to enable vIOMMU for a virtio device.
However with the ability to place an entire PCI segment behind the
IOMMU the IOMMU mapping needs to be setup for the virtio device if it is
behind the IOMMU.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This can already be calculated by the summing the tables reported by the
Linux kernel but this is more convenient.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Separate the destruction and cleanup of original VM and the creation of
the new one. In particular have a clear hand off point for resources
(e.g. reset EventFd) used by the new VM from the original. In the
situation where vm.shutdown() generates an error this also avoids the
Vmm reference to the Vm (self.vm) from being maintained.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the newly added Vdpa device along with the new vdpa parameter,
this patch enables the support for vDPA devices.
It's important to note this the only virtio device for which we provide
an ExternalDmaMapping instance. This will allow for the right DMA ranges
to be mapped/unmapped.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Introduce a new --vdpa parameter associated with a VdpaConfig for the
future creation of a Vdpa device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This will significantly reduce the size of the DSDT and the effort
required to parse them if there is no requirement to support
hotplug/unplug.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If the CpuManager is dynamic it devices CPUs can be
hotplugged/unplugged.
Since TDX does not support CPU hotplug this is currently the only
determinator as to whether the CpuManager is dynamic.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
vmm.ping/vm.info will hang for PUT method, vm.create/vmm.shutdonw hang for GET method.
Because these four APIs do not write the response body when the HTTP method does not match.
Signed-off-by: LiHui <andrewli@kubesphere.io>
In case the virtio device which requires DMA mapping is placed behind a
virtual IOMMU, we shouldn't map/unmap any region manually. Instead, we
provide the DMA handler to the virtio-iommu device so that it can
trigger the proper mappings.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
If a virtio device is associated with a DMA handler, the DMA mapping and
unmapping is performed from the device manager through the handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Given that some virtio device might need some DMA handling, we provide a
way to store this through the VirtioPciDevice layer, so that it can be
accessed when the PCI device is removed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for handling potential DMA mapping/unmapping operations for a
virtio device, we extend the MetaVirtioDevice with an additional field
that holds an optional DMA handler.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
