This commit extends the existing test_vfio by hotplugging an extra
virtio-net device to the L2 VM. The test for validating the hotplug
succeeded is the same as the one to verify the non-hotplugged devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
three extra bundles added to it.
First bundle is curl, which adds the curl binary to the image, second
bundle is iperf, adding the iperf binary to the image, and third bundle
is sysadmin-basic to include utility like netcat.
The image is 2G in size.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
There is no reason to give some special capabilities to the Rust version
of virtiofsd since it behaves slightly differently and does not require
neither DAC_OVERRIDE nor SYS_ADMIN.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The unit tests require some specific Linux capabilities and also to have
access to /dev/kvm device. This commit makes sure we enable only what's
necessary instead of blindly enable full priviliges with --privileged
option.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We need the host IPC for sharing eventfds with KVM, and the host network
for VFIO.
We also enforce the no-seccomp setting on the container, to overcome any
potential filtering set by our container's Ubuntu base.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The placement of the explicit run of "test_vfio" meant it was run with
MMIO rather than PCI which meant it always failed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
test_vfio has been failing consistently on the CI so mark it with
a "#[ignore]" and then forceably build it again but ignore the build
result.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
All our tests must be run as root and thus the build directory is owned
by root after we run any of them.
Start another container to fix all permissions whenever we're done with
our tests.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
By default we will run as root inside the container, which means all the
build artifacts will be owned by root. That prevents us from properly
cleaning our build from an unprivileged host user.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When running the docker container there is no interactivity needed so
don't pass "-ti" to "docker run"
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To mitigate Azure slow disk IO, we mount /tmp on tmpfs.
This is a reproduction of our CI environment, as setup by the
Jenkinsfile.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Check the rust formatting rather than just reformatting code on the CI
agent.
Also fix a formatting error that slipped in whilst the cargo fmt check
was not working correctly.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order, among other things, to use the development CLI to run specific
integration tests. For example, to run only the memory_overhead
integration test:
./scripts/dev_cli.sh tests --integration -- memory_overhead
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We don't need to force the cargo-audit install, we can check if it's
already available instead and install if it's not.
Also, since we now have workspaces properly setup, we can call directly
into cargo fmt and avoid calling into find magic incantation.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The script is a development tool that runs all commands in a dedicated
container. This allows for containerized, isolated and reproducible
builds and CI runs.
The script supports the following command:
* build: Build Cloud Hypervisor binaries (debug and release)
* build-container: Build the container used by the script
* tests: Run unit, cargo and integration tests
$ ./scripts/dev_cli.sh help
Cloud Hypervisor dev_cli.sh
Usage: dev_cli.sh <command> [<command args>]
Available commands:
build [--debug|--release] [-- [<cargo args>]]
Build the Cloud Hypervisor binaries.
--debug Build the debug binaries. This is the default.
--release Build the release binaries.
tests [--unit|--cargo|--all]
Run the Cloud Hypervisor tests.
--unit Run the unit tests.
--cargo Run the cargo tests.
--integration Run the integration tests.
--all Run all tests.
build-container [--type]
Build the Cloud Hypervisor container.
--dev Build dev container. This is the default.
help
Display this help message.
Fixes: #682Fixes: #684
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Because of the new set of patches related to virtio-iommu allowing only
for the topology to be described through virtio configuration, this
patch updates the kernel branch and the kernel configuration our CI
relies on.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When the CI runs in a brand new VM, there's no problem with the validity
of the images as they just got downloaded from the Azure bucket.
In case of a user who runs the CI locally, while doing some debug, he
might provision the images with cloudinit at some point, and later try
to run the CI based on these same images. What happens is that the CI
might randomly fail because the provisioning will not happen again as
it already happened.
This patch ensures the CI to fail early and show an error message to
notify the user about the validity of the images, based on their
sha1sum.
Fixes#112
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The build is run against "--all-features", "pci,acpi", "pci" and "mmio"
separately. The clippy validation must be run against the same set of
features in order to validate the code is correct.
Because of these new checks, this commit includes multiple fixes
related to the errors generated when manually running the checks.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The current virtio-fs-dev branch from the official repo is breaking the
build on our Azure VMs because the glibc wrapper for renameat2() syscall
does not exist. This branch fixes the problem while the maintainers are
fixing the issue upstream.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to validate the newly created virtio-fs-virtio-iommu-5.5-rc1
branch is not breaking anything in our CI, we must try it as a temporary
branch before we can override virtio-fs-virtio-iommu.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make all the crates members of the workspace so that "cargo test
--workspace" will find them all and test them with the features enabled
that we use.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Because we don't always reach the expected footprint improvements with
KSM, let's review the numbers. By reducing the expectations and
increasing the amount of pages to scan, this should stabilize the CI.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Virtio-fs maintainers recently updated the virtiofsd daemon through
their official branch on Gitlab. It includes fixes that were needed for
cloud-hypervisor to work correctly with it.
Jenkinsfile needs to be updated since the virtiofsd build requires both
libseccomp and libcap-ng to be present on the system.
One thing to notice, because the latest branch introduced a change
regarding libfuse behavior, the counterpart patch has been added to the
custom kernel branch "virtio-fs-virtio-iommu".
Fixes#536
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The anyhow crate generates some incorrectly indented code from its
build.rs code. We don't want to run cargo fmt on this code.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We need to validate that OpenAPI YAML definition is not broken by each
and every pull request. The easiest way is to rely on the Docker image
provided by OpenAPITools, as it allows us to validate the definition
with one simple command.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because the resources on the amount of worker nodes we can have access
to through Travis is limited, we offload the burden of running all tests
related to Cargo inside the Azure VM directly.
This will have the positive effect of stopping the build very early in
case something goes wrong during the Cargo testing.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to validate that multiple devices can be passed through and
they are still fully functional, this patch extends the existing VFIO
test to pass a second virtio-net device, and verifies that both
interfaces are functional by ssh'ing into each network interface.
Fixes#503
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The setcap tool is unusual in its behaviour in that it will process each
parameter separately and abort if one of the parameters is invalid (e.g.
after a symlink.) But any previous parameters will be correctly
processed. This means that depending on the generated test binary name
an invalid entry might occur before it and thus abort the setcap.
Fix to only setcap on the test binary by excluding the other files.
Because the binary name is based on a hash the PR that introduced this
version worked but once merged the hash changed and broke the build.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to validate the new virtio-fs daemon written in Rust is
behaving correctly, a new integration test has been added. Important to
note that for now, only a test with cache=none and dax=off can be added
since the daemon does not support shared memory region yet.
The long term goal being to replace virtiofsd with vhost_user_daemon
once it will reach parity regarding the supported features.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
By giving the same caps to both cloud-hypervisor and the test binary, we
can access information under /proc related to the VM PID.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The test validates that when the mergeable option is enabled, the
resulting PSS for two instances of cloud-hypervisor is lower than two
instances not using the mergeable flag.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Update all references to the new repository locations. Many of these will
redirect however the one used for the hypervisor-fw binary does not so
this is required to allow the builds to pass.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Use the new vhost-user-blk backend for the integration tests,
eliminating the need for building vubd using the implementation in
QEMU.
Signed-off-by: Sergio Lopez <slp@redhat.com>
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
two extra bundles added to it.
First bundle is sysadmin-basic to include utility like netcat, and the
second bundle is iperf, adding the iperf binary to the image.
The image is 2G in size.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Azure virtual machines can have private IPs in the 172.16.x.x range,
causing some issues with the VFIO test. By using 172.17.x.x for this
test, we avoid IP conflicts.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Now that cloud-hypervisor can expose a virtual IOMMU to its guest VM,
the integration test validating the VFIO support with virtio-net can be
updated to use cloud-hypervisor exclusively.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because we want both early support for virtio-fs and virtio-iommu, our
custom kernel is now based on the kernel branch virtio-fs-virtio-iommu.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We no longer build vubridge, so we end up cloning qemu and building
virtiofs and the block backend all the time.
Fixes: #312
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
An integration test relying on the new vhost-user-net backend now
replaces the previous test using the QEMU test backend. This allows
us to avoid building the QEMU backend, and we now really exercise the
vhost-user-net implementation as it is used for the ssh communication
in this test.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit extends the existing integration test related to
vhost-user-blk by validating the block image contains one file
"foo" containing "bar".
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Currently we need use backend device from Qemu to test vhost-user-blk
device. Once the rust backend is ready, we will replace it.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
By relying on a decompressed image, this patch assumes that downloading
the image will always be faster than decompressing it from the worker
VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Rely on the newly generated Clear Linux image for the integration
testing of cloud-hypervisor. The image has been generated using the
Clear Linux clr-installer tooling, which means it is in compliance with
the Clear Linux licensing.
This new image contains one more bundle that was not part of the default
cloudguest image. This bundle is basic-sysadmin, and contains both nc
and socat utilities.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to make the tests more verbose and help identify more quickly
where a test might be failing, this patch adds the ability for the unit
tests to print useful information with println.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Running the integration test script showed the following error:
+ '[' '!' -f /home/rob/workloads/virtiofsd
scripts/run_integration_tests.sh: line 84: [: missing `]'
+ -f /home/rob/workloads/vubridge ']'
scripts/run_integration_tests.sh: line 84: -f: command not found
This was preventing the test from reusing build QEMU artifacts.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The virtiofsd daemon takes a bit of time creating and listening on the
socket. By adding 10s timeout, we make sure the vhost-user socket has
been properly created before the VMM tries to connect to it.
Also, the daemon needs cap_dac_override capabilities to access debugfs
filesystem.
Last thing, both virtio-fs and virtio-pmem tests were slightly different
from the others since they were not explicitly killing cloud-hypervisor
and virtiofsd processes once the test was done.
Fixes#182
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Rather than set filesystem permissions on the /dev/kvm device instead
use the kvm group added by installing qemu for running the unit tests.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adjust to reflect that it's QEMU being built here in preparation for
subsequent PRs that also want to build QEMU.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When running the script from an interactive environment there are always
some files inside the git directory that rm prompts to delete so instead
pass "-f" to avoid that.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to be able to use the latest version from virtiofsd binary, the
integration tests will now build it directly from a branch located on
sboeuf's QEMU fork. The same way the kernel is hosted on sboeuf's linux
kernel fork, this allows to update the version of the virtiofs daemon
based on latest patches from virtio-fs maintainers.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The last kernel we were using included some manual porting of the
virtio-pmem and virtio-fs patches. By moving to 5.3-rc3, we are now
closer to upstream since the virtio-pmem patches are part of the linux
kernel now. Additionally, this includes the latest patches from
virtio-fs maintainers, which works with the latest version of virtiofsd.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With the addition of commands after running the integration tests the
exit code of the tests were lost.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Download Bionic image and convert to raw (the QCOW version of the file
doesn't currently work) for running the integration tests.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add cloud-init data for Ubuntu and introduce a convenience script that
can be used to generate cloud-init disk images for manual testing.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This should reduce the integration testing time considerably. When a
custom kernel is no longer required we can pull kernel from tarball
again.
Fixes: #100
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The VFIO integration test first boots a QEMU guest and then assigns the
QEMU virtio-pci networking device into a nested cloud-hypervisor guest.
We then check that we can ssh into the nested guest and verify that it's
running with the right kernel command line.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In some situations it is possible for the setting of the capabilities to
fail due to the variable naming of the build artifacts resulting in the
first parameter to setcap being rejected and thus the whole command
failing.
Use xargs -n 1 to ensure that every potential target independently has
its caps set.
Further it was observed that in some situations the binary produced by
cargo test --all --no-run would not be used and instead a new binary
would be produced when the test was run using the second method. This
again would result in test failures as that binary did not have the
desired capabilities set. Therefore build the test binaries with the
same methodology used to run them.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In the future this will provide the basis for the ability to customise
the cloud-init file per VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The addition of [workspace] to the top level Cargo.toml is necessary to
have the binaries colocated together.
The Cargo.lock files have also been refreshed by the change to the
Cargo.toml.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add 2 integration tests to validate virtio-pmem works as expected.
One test takes care of checking the ability to read and write to this
persistent memory from the guest, and validates that the data is
carried over the virtualization boundary.
The other test ensures the VM can be booted directly from an image
that would be passed through virtio-pmem.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This commit introduces the testing of the --fs option based on the
virtio-fs implementation. This does not simply add a test, but also
updates the integration script by generating a new kernel embedding
the virtio-fs patches and by downloading the virtiofsd daemon.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Download and build a Linux kernel and use the vmlinux produced as the
kernel used with a direct boot kernel test.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Switch the Clear Linux version to a newer release and cache that in an
azure bucket in the same region to improve the CI speed.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Launch the test binary by command rather than using using the vmm layer.
This makes it easier to manage the running VM as you can explicitly kill
it.
Also switch to using credibility for the tests which catches assertions
and continues with subsequent commands and reports the issues at the
end. This means it is possible to cleanup even on failed test runs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add basic integration testing of the hypervisor using a cloud-init to
configure the VM at boot and SSH to control it at runtime.
Initial test just boots the VM up checks some basic resources and
reboots. With a second test that calls into the first to check that
subsequent tests work correctly.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
