cloud-hypervisor/vmm/src/cpu.rs
Michael Zhao 7199119bb2 hypervisor: Remove Vcpu::read_mpidr() on AArch64
Replaced `read_mpidr()` with `get_sys_reg()`.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2022-07-29 11:45:12 +01:00

2509 lines
90 KiB
Rust
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Copyright © 2020, Oracle and/or its affiliates.
//
// Copyright 2018 Amazon.com, Inc. or its affiliates. All Rights Reserved.
//
// Portions Copyright 2017 The Chromium OS Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE-BSD-3-Clause file.
//
// Copyright © 2019 Intel Corporation
//
// SPDX-License-Identifier: Apache-2.0 AND BSD-3-Clause
//
use crate::config::CpusConfig;
#[cfg(feature = "guest_debug")]
use crate::coredump::{
CpuElf64Writable, CpuSegment, CpuState as DumpCpusState, DumpState, Elf64Writable,
GuestDebuggableError, NoteDescType, X86_64ElfPrStatus, X86_64UserRegs, COREDUMP_NAME_SIZE,
NT_PRSTATUS,
};
use crate::device_manager::DeviceManager;
#[cfg(feature = "gdb")]
use crate::gdb::{get_raw_tid, Debuggable, DebuggableError};
use crate::memory_manager::MemoryManager;
use crate::seccomp_filters::{get_seccomp_filter, Thread};
#[cfg(target_arch = "x86_64")]
use crate::vm::physical_bits;
use crate::GuestMemoryMmap;
use crate::CPU_MANAGER_SNAPSHOT_ID;
use acpi_tables::{aml, aml::Aml, sdt::Sdt};
use anyhow::anyhow;
use arch::EntryPoint;
use arch::NumaNodes;
use devices::interrupt_controller::InterruptController;
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
use gdbstub_arch::x86::reg::{X86SegmentRegs, X86_64CoreRegs};
#[cfg(feature = "guest_debug")]
use hypervisor::arch::x86::msr_index;
#[cfg(target_arch = "x86_64")]
use hypervisor::arch::x86::CpuIdEntry;
#[cfg(feature = "guest_debug")]
use hypervisor::arch::x86::MsrEntry;
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
use hypervisor::arch::x86::{SpecialRegisters, StandardRegisters};
#[cfg(target_arch = "aarch64")]
use hypervisor::kvm::kvm_bindings;
#[cfg(feature = "tdx")]
use hypervisor::kvm::{TdxExitDetails, TdxExitStatus};
use hypervisor::{CpuState, HypervisorCpuError, HypervisorType, VmExit, VmOps};
use libc::{c_void, siginfo_t};
#[cfg(feature = "guest_debug")]
use linux_loader::elf::Elf64_Nhdr;
use seccompiler::{apply_filter, SeccompAction};
use std::collections::BTreeMap;
#[cfg(feature = "guest_debug")]
use std::io::Write;
#[cfg(feature = "guest_debug")]
use std::mem::size_of;
use std::os::unix::thread::JoinHandleExt;
use std::sync::atomic::{AtomicBool, Ordering};
use std::sync::{Arc, Barrier, Mutex};
use std::{cmp, io, result, thread};
use thiserror::Error;
use vm_device::BusDevice;
#[cfg(feature = "guest_debug")]
use vm_memory::ByteValued;
#[cfg(feature = "gdb")]
use vm_memory::{Bytes, GuestAddressSpace};
use vm_memory::{GuestAddress, GuestMemoryAtomic};
use vm_migration::{
Migratable, MigratableError, Pausable, Snapshot, SnapshotDataSection, Snapshottable,
Transportable,
};
use vmm_sys_util::eventfd::EventFd;
use vmm_sys_util::signal::{register_signal_handler, SIGRTMIN};
pub const CPU_MANAGER_ACPI_SIZE: usize = 0xc;
#[derive(Debug, Error)]
pub enum Error {
#[error("Error creating vCPU: {0}")]
VcpuCreate(#[source] anyhow::Error),
#[error("Error running bCPU: {0}")]
VcpuRun(#[source] anyhow::Error),
#[error("Error spawning vCPU thread: {0}")]
VcpuSpawn(#[source] io::Error),
#[error("Error generating common CPUID: {0}")]
CommonCpuId(#[source] arch::Error),
#[error("Error configuring vCPU: {0}")]
VcpuConfiguration(#[source] arch::Error),
#[cfg(target_arch = "aarch64")]
#[error("Error fetching preferred target: {0}")]
VcpuArmPreferredTarget(#[source] hypervisor::HypervisorVmError),
#[cfg(target_arch = "aarch64")]
#[error("Error initialising vCPU: {0}")]
VcpuArmInit(#[source] hypervisor::HypervisorCpuError),
#[error("Failed to join on vCPU threads: {0:?}")]
ThreadCleanup(std::boxed::Box<dyn std::any::Any + std::marker::Send>),
#[error("Error adding CpuManager to MMIO bus: {0}")]
BusError(#[source] vm_device::BusError),
#[error("Requested vCPUs exceed maximum")]
DesiredVCpuCountExceedsMax,
#[error("Cannot create seccomp filter: {0}")]
CreateSeccompFilter(#[source] seccompiler::Error),
#[error("Cannot apply seccomp filter: {0}")]
ApplySeccompFilter(#[source] seccompiler::Error),
#[error("Error starting vCPU after restore: {0}")]
StartRestoreVcpu(#[source] anyhow::Error),
#[error("Unexpected VmExit")]
UnexpectedVmExit,
#[error("Failed to allocate MMIO address for CpuManager")]
AllocateMmmioAddress,
#[cfg(feature = "tdx")]
#[error("Error initializing TDX: {0}")]
InitializeTdx(#[source] hypervisor::HypervisorCpuError),
#[cfg(target_arch = "aarch64")]
#[error("Error initializing PMU: {0}")]
InitPmu(#[source] hypervisor::HypervisorCpuError),
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
#[error("Error during CPU debug: {0}")]
CpuDebug(#[source] hypervisor::HypervisorCpuError),
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
#[error("Error translating virtual address: {0}")]
TranslateVirtualAddress(#[source] hypervisor::HypervisorCpuError),
#[cfg(all(feature = "amx", target_arch = "x86_64"))]
#[error("Error setting up AMX: {0}")]
AmxEnable(#[source] anyhow::Error),
}
pub type Result<T> = result::Result<T, Error>;
#[cfg(target_arch = "x86_64")]
#[allow(dead_code)]
#[repr(packed)]
struct LocalApic {
pub r#type: u8,
pub length: u8,
pub processor_id: u8,
pub apic_id: u8,
pub flags: u32,
}
#[allow(dead_code)]
#[repr(packed)]
#[derive(Default)]
struct Ioapic {
pub r#type: u8,
pub length: u8,
pub ioapic_id: u8,
_reserved: u8,
pub apic_address: u32,
pub gsi_base: u32,
}
#[cfg(target_arch = "aarch64")]
#[allow(dead_code)]
#[repr(packed)]
struct GicC {
pub r#type: u8,
pub length: u8,
pub reserved0: u16,
pub cpu_interface_number: u32,
pub uid: u32,
pub flags: u32,
pub parking_version: u32,
pub performance_interrupt: u32,
pub parked_address: u64,
pub base_address: u64,
pub gicv_base_address: u64,
pub gich_base_address: u64,
pub vgic_interrupt: u32,
pub gicr_base_address: u64,
pub mpidr: u64,
pub proc_power_effi_class: u8,
pub reserved1: u8,
pub spe_overflow_interrupt: u16,
}
#[cfg(target_arch = "aarch64")]
#[allow(dead_code)]
#[repr(packed)]
struct GicD {
pub r#type: u8,
pub length: u8,
pub reserved0: u16,
pub gic_id: u32,
pub base_address: u64,
pub global_irq_base: u32,
pub version: u8,
pub reserved1: [u8; 3],
}
#[cfg(target_arch = "aarch64")]
#[allow(dead_code)]
#[repr(packed)]
struct GicR {
pub r#type: u8,
pub length: u8,
pub reserved: u16,
pub base_address: u64,
pub range_length: u32,
}
#[cfg(target_arch = "aarch64")]
#[allow(dead_code)]
#[repr(packed)]
struct GicIts {
pub r#type: u8,
pub length: u8,
pub reserved0: u16,
pub translation_id: u32,
pub base_address: u64,
pub reserved1: u32,
}
#[cfg(target_arch = "aarch64")]
#[allow(dead_code)]
#[repr(packed)]
struct ProcessorHierarchyNode {
pub r#type: u8,
pub length: u8,
pub reserved: u16,
pub flags: u32,
pub parent: u32,
pub acpi_processor_id: u32,
pub num_private_resources: u32,
}
#[allow(dead_code)]
#[repr(packed)]
#[derive(Default)]
struct InterruptSourceOverride {
pub r#type: u8,
pub length: u8,
pub bus: u8,
pub source: u8,
pub gsi: u32,
pub flags: u16,
}
#[cfg(feature = "guest_debug")]
macro_rules! round_up {
($n:expr,$d:expr) => {
(($n / ($d + 1)) + 1) * $d
};
}
/// A wrapper around creating and using a kvm-based VCPU.
pub struct Vcpu {
// The hypervisor abstracted CPU.
vcpu: Arc<dyn hypervisor::Vcpu>,
id: u8,
#[cfg(target_arch = "aarch64")]
mpidr: u64,
saved_state: Option<CpuState>,
}
impl Vcpu {
/// Constructs a new VCPU for `vm`.
///
/// # Arguments
///
/// * `id` - Represents the CPU number between [0, max vcpus).
/// * `vm` - The virtual machine this vcpu will get attached to.
/// * `vm_ops` - Optional object for exit handling.
pub fn new(
id: u8,
vm: &Arc<dyn hypervisor::Vm>,
vm_ops: Option<Arc<dyn VmOps>>,
) -> Result<Self> {
let vcpu = vm
.create_vcpu(id, vm_ops)
.map_err(|e| Error::VcpuCreate(e.into()))?;
// Initially the cpuid per vCPU is the one supported by this VM.
Ok(Vcpu {
vcpu,
id,
#[cfg(target_arch = "aarch64")]
mpidr: 0,
saved_state: None,
})
}
/// Configures a vcpu and should be called once per vcpu when created.
///
/// # Arguments
///
/// * `kernel_entry_point` - Kernel entry point address in guest memory and boot protocol used.
/// * `vm_memory` - Guest memory.
/// * `cpuid` - (x86_64) CpuId, wrapper over the `kvm_cpuid2` structure.
pub fn configure(
&mut self,
#[cfg(target_arch = "aarch64")] vm: &Arc<dyn hypervisor::Vm>,
kernel_entry_point: Option<EntryPoint>,
#[cfg(target_arch = "x86_64")] vm_memory: &GuestMemoryAtomic<GuestMemoryMmap>,
#[cfg(target_arch = "x86_64")] cpuid: Vec<CpuIdEntry>,
#[cfg(target_arch = "x86_64")] kvm_hyperv: bool,
) -> Result<()> {
#[cfg(target_arch = "aarch64")]
{
self.init(vm)?;
self.mpidr = arch::configure_vcpu(&self.vcpu, self.id, kernel_entry_point)
.map_err(Error::VcpuConfiguration)?;
}
info!("Configuring vCPU: cpu_id = {}", self.id);
#[cfg(target_arch = "x86_64")]
arch::configure_vcpu(
&self.vcpu,
self.id,
kernel_entry_point,
vm_memory,
cpuid,
kvm_hyperv,
)
.map_err(Error::VcpuConfiguration)?;
Ok(())
}
/// Gets the MPIDR register value.
#[cfg(target_arch = "aarch64")]
pub fn get_mpidr(&self) -> u64 {
self.mpidr
}
/// Gets the saved vCPU state.
#[cfg(target_arch = "aarch64")]
pub fn get_saved_state(&self) -> Option<CpuState> {
self.saved_state.clone()
}
/// Initializes an aarch64 specific vcpu for booting Linux.
#[cfg(target_arch = "aarch64")]
pub fn init(&self, vm: &Arc<dyn hypervisor::Vm>) -> Result<()> {
let mut kvi: kvm_bindings::kvm_vcpu_init = kvm_bindings::kvm_vcpu_init::default();
// This reads back the kernel's preferred target type.
vm.get_preferred_target(&mut kvi)
.map_err(Error::VcpuArmPreferredTarget)?;
// We already checked that the capability is supported.
kvi.features[0] |= 1 << kvm_bindings::KVM_ARM_VCPU_PSCI_0_2;
kvi.features[0] |= 1 << kvm_bindings::KVM_ARM_VCPU_PMU_V3;
// Non-boot cpus are powered off initially.
if self.id > 0 {
kvi.features[0] |= 1 << kvm_bindings::KVM_ARM_VCPU_POWER_OFF;
}
self.vcpu.vcpu_init(&kvi).map_err(Error::VcpuArmInit)
}
/// Runs the VCPU until it exits, returning the reason.
///
/// Note that the state of the VCPU and associated VM must be setup first for this to do
/// anything useful.
pub fn run(&self) -> std::result::Result<VmExit, HypervisorCpuError> {
self.vcpu.run()
}
}
const VCPU_SNAPSHOT_ID: &str = "vcpu";
impl Pausable for Vcpu {}
impl Snapshottable for Vcpu {
fn id(&self) -> String {
VCPU_SNAPSHOT_ID.to_string()
}
fn snapshot(&mut self) -> std::result::Result<Snapshot, MigratableError> {
let saved_state = self
.vcpu
.state()
.map_err(|e| MigratableError::Pause(anyhow!("Could not get vCPU state {:?}", e)))?;
let mut vcpu_snapshot = Snapshot::new(&format!("{:03}", self.id));
vcpu_snapshot.add_data_section(SnapshotDataSection::new_from_state(
VCPU_SNAPSHOT_ID,
&saved_state,
)?);
self.saved_state = Some(saved_state);
Ok(vcpu_snapshot)
}
fn restore(&mut self, snapshot: Snapshot) -> std::result::Result<(), MigratableError> {
let saved_state: CpuState = snapshot.to_state(VCPU_SNAPSHOT_ID)?;
self.vcpu
.set_state(&saved_state)
.map_err(|e| MigratableError::Pause(anyhow!("Could not set the vCPU state {:?}", e)))?;
self.saved_state = Some(saved_state);
Ok(())
}
}
pub struct CpuManager {
hypervisor_type: HypervisorType,
config: CpusConfig,
#[cfg_attr(target_arch = "aarch64", allow(dead_code))]
interrupt_controller: Option<Arc<Mutex<dyn InterruptController>>>,
#[cfg_attr(target_arch = "aarch64", allow(dead_code))]
vm_memory: GuestMemoryAtomic<GuestMemoryMmap>,
#[cfg(target_arch = "x86_64")]
cpuid: Vec<CpuIdEntry>,
#[cfg_attr(target_arch = "aarch64", allow(dead_code))]
vm: Arc<dyn hypervisor::Vm>,
vcpus_kill_signalled: Arc<AtomicBool>,
vcpus_pause_signalled: Arc<AtomicBool>,
exit_evt: EventFd,
#[cfg_attr(target_arch = "aarch64", allow(dead_code))]
reset_evt: EventFd,
#[cfg(feature = "gdb")]
vm_debug_evt: EventFd,
vcpu_states: Vec<VcpuState>,
selected_cpu: u8,
vcpus: Vec<Arc<Mutex<Vcpu>>>,
seccomp_action: SeccompAction,
vm_ops: Arc<dyn VmOps>,
#[cfg_attr(target_arch = "aarch64", allow(dead_code))]
acpi_address: Option<GuestAddress>,
proximity_domain_per_cpu: BTreeMap<u8, u32>,
affinity: BTreeMap<u8, Vec<u8>>,
dynamic: bool,
}
const CPU_ENABLE_FLAG: usize = 0;
const CPU_INSERTING_FLAG: usize = 1;
const CPU_REMOVING_FLAG: usize = 2;
const CPU_EJECT_FLAG: usize = 3;
const CPU_STATUS_OFFSET: u64 = 4;
const CPU_SELECTION_OFFSET: u64 = 0;
impl BusDevice for CpuManager {
fn read(&mut self, _base: u64, offset: u64, data: &mut [u8]) {
// The Linux kernel, quite reasonably, doesn't zero the memory it gives us.
data.fill(0);
match offset {
CPU_SELECTION_OFFSET => {
data[0] = self.selected_cpu;
}
CPU_STATUS_OFFSET => {
if self.selected_cpu < self.max_vcpus() {
let state = &self.vcpu_states[usize::from(self.selected_cpu)];
if state.active() {
data[0] |= 1 << CPU_ENABLE_FLAG;
}
if state.inserting {
data[0] |= 1 << CPU_INSERTING_FLAG;
}
if state.removing {
data[0] |= 1 << CPU_REMOVING_FLAG;
}
} else {
warn!("Out of range vCPU id: {}", self.selected_cpu);
}
}
_ => {
warn!(
"Unexpected offset for accessing CPU manager device: {:#}",
offset
);
}
}
}
fn write(&mut self, _base: u64, offset: u64, data: &[u8]) -> Option<Arc<Barrier>> {
match offset {
CPU_SELECTION_OFFSET => {
self.selected_cpu = data[0];
}
CPU_STATUS_OFFSET => {
if self.selected_cpu < self.max_vcpus() {
let state = &mut self.vcpu_states[usize::from(self.selected_cpu)];
// The ACPI code writes back a 1 to acknowledge the insertion
if (data[0] & (1 << CPU_INSERTING_FLAG) == 1 << CPU_INSERTING_FLAG)
&& state.inserting
{
state.inserting = false;
}
// Ditto for removal
if (data[0] & (1 << CPU_REMOVING_FLAG) == 1 << CPU_REMOVING_FLAG)
&& state.removing
{
state.removing = false;
}
// Trigger removal of vCPU
if data[0] & (1 << CPU_EJECT_FLAG) == 1 << CPU_EJECT_FLAG {
if let Err(e) = self.remove_vcpu(self.selected_cpu) {
error!("Error removing vCPU: {:?}", e);
}
}
} else {
warn!("Out of range vCPU id: {}", self.selected_cpu);
}
}
_ => {
warn!(
"Unexpected offset for accessing CPU manager device: {:#}",
offset
);
}
}
None
}
}
#[derive(Default)]
struct VcpuState {
inserting: bool,
removing: bool,
handle: Option<thread::JoinHandle<()>>,
kill: Arc<AtomicBool>,
vcpu_run_interrupted: Arc<AtomicBool>,
}
impl VcpuState {
fn active(&self) -> bool {
self.handle.is_some()
}
fn signal_thread(&self) {
if let Some(handle) = self.handle.as_ref() {
loop {
unsafe {
libc::pthread_kill(handle.as_pthread_t() as _, SIGRTMIN());
}
if self.vcpu_run_interrupted.load(Ordering::SeqCst) {
break;
} else {
// This is more effective than thread::yield_now() at
// avoiding a priority inversion with the vCPU thread
thread::sleep(std::time::Duration::from_millis(1));
}
}
}
}
fn join_thread(&mut self) -> Result<()> {
if let Some(handle) = self.handle.take() {
handle.join().map_err(Error::ThreadCleanup)?
}
Ok(())
}
fn unpark_thread(&self) {
if let Some(handle) = self.handle.as_ref() {
handle.thread().unpark()
}
}
}
impl CpuManager {
#[allow(unused_variables)]
#[allow(clippy::too_many_arguments)]
pub fn new(
config: &CpusConfig,
device_manager: &Arc<Mutex<DeviceManager>>,
memory_manager: &Arc<Mutex<MemoryManager>>,
vm: Arc<dyn hypervisor::Vm>,
exit_evt: EventFd,
reset_evt: EventFd,
#[cfg(feature = "gdb")] vm_debug_evt: EventFd,
hypervisor: Arc<dyn hypervisor::Hypervisor>,
seccomp_action: SeccompAction,
vm_ops: Arc<dyn VmOps>,
#[cfg(feature = "tdx")] tdx_enabled: bool,
numa_nodes: &NumaNodes,
) -> Result<Arc<Mutex<CpuManager>>> {
let guest_memory = memory_manager.lock().unwrap().guest_memory();
let mut vcpu_states = Vec::with_capacity(usize::from(config.max_vcpus));
vcpu_states.resize_with(usize::from(config.max_vcpus), VcpuState::default);
let hypervisor_type = hypervisor.hypervisor_type();
#[cfg(target_arch = "x86_64")]
let sgx_epc_sections = memory_manager
.lock()
.unwrap()
.sgx_epc_region()
.as_ref()
.map(|sgx_epc_region| sgx_epc_region.epc_sections().values().cloned().collect());
#[cfg(target_arch = "x86_64")]
let cpuid = {
let phys_bits = physical_bits(config.max_phys_bits);
arch::generate_common_cpuid(
hypervisor,
config
.topology
.clone()
.map(|t| (t.threads_per_core, t.cores_per_die, t.dies_per_package)),
sgx_epc_sections,
phys_bits,
config.kvm_hyperv,
#[cfg(feature = "tdx")]
tdx_enabled,
)
.map_err(Error::CommonCpuId)?
};
#[cfg(all(feature = "amx", target_arch = "x86_64"))]
if config.features.amx {
const ARCH_GET_XCOMP_GUEST_PERM: usize = 0x1024;
const ARCH_REQ_XCOMP_GUEST_PERM: usize = 0x1025;
const XFEATURE_XTILEDATA: usize = 18;
const XFEATURE_XTILEDATA_MASK: usize = 1 << XFEATURE_XTILEDATA;
// This is safe as the syscall is only modifing kernel internal
// data structures that the kernel is itself expected to safeguard.
let amx_tile = unsafe {
libc::syscall(
libc::SYS_arch_prctl,
ARCH_REQ_XCOMP_GUEST_PERM,
XFEATURE_XTILEDATA,
)
};
if amx_tile != 0 {
return Err(Error::AmxEnable(anyhow!("Guest AMX usage not supported")));
} else {
// This is safe as the mask being modified (not marked mutable as it is
// modified in unsafe only which is permitted) isn't in use elsewhere.
let mask: usize = 0;
let result = unsafe {
libc::syscall(libc::SYS_arch_prctl, ARCH_GET_XCOMP_GUEST_PERM, &mask)
};
if result != 0 || (mask & XFEATURE_XTILEDATA_MASK) != XFEATURE_XTILEDATA_MASK {
return Err(Error::AmxEnable(anyhow!("Guest AMX usage not supported")));
}
}
}
let device_manager = device_manager.lock().unwrap();
let proximity_domain_per_cpu: BTreeMap<u8, u32> = {
let mut cpu_list = Vec::new();
for (proximity_domain, numa_node) in numa_nodes.iter() {
for cpu in numa_node.cpus.iter() {
cpu_list.push((*cpu, *proximity_domain))
}
}
cpu_list
}
.into_iter()
.collect();
let affinity = if let Some(cpu_affinity) = config.affinity.as_ref() {
cpu_affinity
.iter()
.map(|a| (a.vcpu, a.host_cpus.clone()))
.collect()
} else {
BTreeMap::new()
};
#[cfg(feature = "tdx")]
let dynamic = !tdx_enabled;
#[cfg(not(feature = "tdx"))]
let dynamic = true;
let acpi_address = if dynamic {
Some(
device_manager
.allocator()
.lock()
.unwrap()
.allocate_platform_mmio_addresses(None, CPU_MANAGER_ACPI_SIZE as u64, None)
.ok_or(Error::AllocateMmmioAddress)?,
)
} else {
None
};
let cpu_manager = Arc::new(Mutex::new(CpuManager {
hypervisor_type,
config: config.clone(),
interrupt_controller: device_manager.interrupt_controller().clone(),
vm_memory: guest_memory,
#[cfg(target_arch = "x86_64")]
cpuid,
vm,
vcpus_kill_signalled: Arc::new(AtomicBool::new(false)),
vcpus_pause_signalled: Arc::new(AtomicBool::new(false)),
vcpu_states,
exit_evt,
reset_evt,
#[cfg(feature = "gdb")]
vm_debug_evt,
selected_cpu: 0,
vcpus: Vec::with_capacity(usize::from(config.max_vcpus)),
seccomp_action,
vm_ops,
acpi_address,
proximity_domain_per_cpu,
affinity,
dynamic,
}));
if let Some(acpi_address) = acpi_address {
device_manager
.mmio_bus()
.insert(
cpu_manager.clone(),
acpi_address.0,
CPU_MANAGER_ACPI_SIZE as u64,
)
.map_err(Error::BusError)?;
}
Ok(cpu_manager)
}
fn create_vcpu(
&mut self,
cpu_id: u8,
entry_point: Option<EntryPoint>,
snapshot: Option<Snapshot>,
) -> Result<()> {
info!("Creating vCPU: cpu_id = {}", cpu_id);
let mut vcpu = Vcpu::new(cpu_id, &self.vm, Some(self.vm_ops.clone()))?;
if let Some(snapshot) = snapshot {
// AArch64 vCPUs should be initialized after created.
#[cfg(target_arch = "aarch64")]
vcpu.init(&self.vm)?;
vcpu.restore(snapshot).expect("Failed to restore vCPU");
} else {
#[cfg(target_arch = "x86_64")]
vcpu.configure(
entry_point,
&self.vm_memory,
self.cpuid.clone(),
self.config.kvm_hyperv,
)
.expect("Failed to configure vCPU");
#[cfg(target_arch = "aarch64")]
vcpu.configure(&self.vm, entry_point)
.expect("Failed to configure vCPU");
}
// Adding vCPU to the CpuManager's vCPU list.
let vcpu = Arc::new(Mutex::new(vcpu));
self.vcpus.push(vcpu);
Ok(())
}
/// Only create new vCPUs if there aren't any inactive ones to reuse
fn create_vcpus(&mut self, desired_vcpus: u8, entry_point: Option<EntryPoint>) -> Result<()> {
info!(
"Request to create new vCPUs: desired = {}, max = {}, allocated = {}, present = {}",
desired_vcpus,
self.config.max_vcpus,
self.vcpus.len(),
self.present_vcpus()
);
if desired_vcpus > self.config.max_vcpus {
return Err(Error::DesiredVCpuCountExceedsMax);
}
// Only create vCPUs in excess of all the allocated vCPUs.
for cpu_id in self.vcpus.len() as u8..desired_vcpus {
self.create_vcpu(cpu_id, entry_point, None)?;
}
Ok(())
}
#[cfg(target_arch = "aarch64")]
pub fn init_pmu(&self, irq: u32) -> Result<bool> {
for cpu in self.vcpus.iter() {
let cpu = cpu.lock().unwrap();
// Check if PMU attr is available, if not, log the information.
if cpu.vcpu.has_pmu_support() {
cpu.vcpu.init_pmu(irq).map_err(Error::InitPmu)?;
} else {
debug!(
"PMU attribute is not supported in vCPU{}, skip PMU init!",
cpu.id
);
return Ok(false);
}
}
Ok(true)
}
fn start_vcpu(
&mut self,
vcpu: Arc<Mutex<Vcpu>>,
vcpu_id: u8,
vcpu_thread_barrier: Arc<Barrier>,
inserting: bool,
) -> Result<()> {
let reset_evt = self.reset_evt.try_clone().unwrap();
let exit_evt = self.exit_evt.try_clone().unwrap();
#[cfg(feature = "gdb")]
let vm_debug_evt = self.vm_debug_evt.try_clone().unwrap();
let panic_exit_evt = self.exit_evt.try_clone().unwrap();
let vcpu_kill_signalled = self.vcpus_kill_signalled.clone();
let vcpu_pause_signalled = self.vcpus_pause_signalled.clone();
let vcpu_kill = self.vcpu_states[usize::from(vcpu_id)].kill.clone();
let vcpu_run_interrupted = self.vcpu_states[usize::from(vcpu_id)]
.vcpu_run_interrupted
.clone();
let panic_vcpu_run_interrupted = vcpu_run_interrupted.clone();
// Prepare the CPU set the current vCPU is expected to run onto.
let cpuset = self.affinity.get(&vcpu_id).map(|host_cpus| {
let mut cpuset: libc::cpu_set_t = unsafe { std::mem::zeroed() };
unsafe { libc::CPU_ZERO(&mut cpuset) };
for host_cpu in host_cpus {
unsafe { libc::CPU_SET(*host_cpu as usize, &mut cpuset) };
}
cpuset
});
// Retrieve seccomp filter for vcpu thread
let vcpu_seccomp_filter =
get_seccomp_filter(&self.seccomp_action, Thread::Vcpu, self.hypervisor_type)
.map_err(Error::CreateSeccompFilter)?;
#[cfg(target_arch = "x86_64")]
let interrupt_controller_clone = self.interrupt_controller.as_ref().cloned();
info!("Starting vCPU: cpu_id = {}", vcpu_id);
let handle = Some(
thread::Builder::new()
.name(format!("vcpu{}", vcpu_id))
.spawn(move || {
// Schedule the thread to run on the expected CPU set
if let Some(cpuset) = cpuset.as_ref() {
let ret = unsafe {
libc::sched_setaffinity(
0,
std::mem::size_of::<libc::cpu_set_t>(),
cpuset as *const libc::cpu_set_t,
)
};
if ret != 0 {
error!(
"Failed scheduling the vCPU {} on the expected CPU set: {}",
vcpu_id,
io::Error::last_os_error()
);
return;
}
}
// Apply seccomp filter for vcpu thread.
if !vcpu_seccomp_filter.is_empty() {
if let Err(e) =
apply_filter(&vcpu_seccomp_filter).map_err(Error::ApplySeccompFilter)
{
error!("Error applying seccomp filter: {:?}", e);
return;
}
}
extern "C" fn handle_signal(_: i32, _: *mut siginfo_t, _: *mut c_void) {}
// This uses an async signal safe handler to kill the vcpu handles.
register_signal_handler(SIGRTMIN(), handle_signal)
.expect("Failed to register vcpu signal handler");
// Block until all CPUs are ready.
vcpu_thread_barrier.wait();
std::panic::catch_unwind(move || {
loop {
// If we are being told to pause, we park the thread
// until the pause boolean is toggled.
// The resume operation is responsible for toggling
// the boolean and unpark the thread.
// We enter a loop because park() could spuriously
// return. We will then park() again unless the
// pause boolean has been toggled.
// Need to use Ordering::SeqCst as we have multiple
// loads and stores to different atomics and we need
// to see them in a consistent order in all threads
if vcpu_pause_signalled.load(Ordering::SeqCst) {
// As a pause can be caused by PIO & MMIO exits then we need to ensure they are
// completed by returning to KVM_RUN. From the kernel docs:
//
// For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR, KVM_EXIT_XEN,
// KVM_EXIT_EPR, KVM_EXIT_X86_RDMSR and KVM_EXIT_X86_WRMSR the corresponding
// operations are complete (and guest state is consistent) only after userspace
// has re-entered the kernel with KVM_RUN. The kernel side will first finish
// incomplete operations and then check for pending signals.
// The pending state of the operation is not preserved in state which is
// visible to userspace, thus userspace should ensure that the operation is
// completed before performing a live migration. Userspace can re-enter the
// guest with an unmasked signal pending or with the immediate_exit field set
// to complete pending operations without allowing any further instructions
// to be executed.
#[cfg(feature = "kvm")]
{
vcpu.lock().as_ref().unwrap().vcpu.set_immediate_exit(true);
if !matches!(vcpu.lock().unwrap().run(), Ok(VmExit::Ignore)) {
error!("Unexpected VM exit on \"immediate_exit\" run");
break;
}
vcpu.lock().as_ref().unwrap().vcpu.set_immediate_exit(false);
}
vcpu_run_interrupted.store(true, Ordering::SeqCst);
while vcpu_pause_signalled.load(Ordering::SeqCst) {
thread::park();
}
vcpu_run_interrupted.store(false, Ordering::SeqCst);
}
// We've been told to terminate
if vcpu_kill_signalled.load(Ordering::SeqCst)
|| vcpu_kill.load(Ordering::SeqCst)
{
vcpu_run_interrupted.store(true, Ordering::SeqCst);
break;
}
#[cfg(feature = "tdx")]
let mut vcpu = vcpu.lock().unwrap();
#[cfg(not(feature = "tdx"))]
let vcpu = vcpu.lock().unwrap();
// vcpu.run() returns false on a triple-fault so trigger a reset
match vcpu.run() {
Ok(run) => match run {
#[cfg(all(target_arch = "x86_64", feature = "kvm"))]
VmExit::Debug => {
info!("VmExit::Debug");
#[cfg(feature = "gdb")]
{
vcpu_pause_signalled.store(true, Ordering::SeqCst);
let raw_tid = get_raw_tid(vcpu_id as usize);
vm_debug_evt.write(raw_tid as u64).unwrap();
}
}
#[cfg(target_arch = "x86_64")]
VmExit::IoapicEoi(vector) => {
if let Some(interrupt_controller) =
&interrupt_controller_clone
{
interrupt_controller
.lock()
.unwrap()
.end_of_interrupt(vector);
}
}
VmExit::Ignore => {}
VmExit::Hyperv => {}
VmExit::Reset => {
info!("VmExit::Reset");
vcpu_run_interrupted.store(true, Ordering::SeqCst);
reset_evt.write(1).unwrap();
break;
}
VmExit::Shutdown => {
info!("VmExit::Shutdown");
vcpu_run_interrupted.store(true, Ordering::SeqCst);
exit_evt.write(1).unwrap();
break;
}
#[cfg(feature = "tdx")]
VmExit::Tdx => {
if let Some(vcpu) = Arc::get_mut(&mut vcpu.vcpu) {
match vcpu.get_tdx_exit_details() {
Ok(details) => match details {
TdxExitDetails::GetQuote => warn!("TDG_VP_VMCALL_GET_QUOTE not supported"),
TdxExitDetails::SetupEventNotifyInterrupt => {
warn!("TDG_VP_VMCALL_SETUP_EVENT_NOTIFY_INTERRUPT not supported")
}
},
Err(e) => error!("Unexpected TDX VMCALL: {}", e),
}
vcpu.set_tdx_status(TdxExitStatus::InvalidOperand);
} else {
// We should never reach this code as
// this means the design from the code
// is wrong.
unreachable!("Couldn't get a mutable reference from Arc<dyn Vcpu> as there are multiple instances");
}
}
_ => {
error!(
"VCPU generated error: {:?}",
Error::UnexpectedVmExit
);
break;
}
},
Err(e) => {
error!("VCPU generated error: {:?}", Error::VcpuRun(e.into()));
break;
}
}
// We've been told to terminate
if vcpu_kill_signalled.load(Ordering::SeqCst)
|| vcpu_kill.load(Ordering::SeqCst)
{
vcpu_run_interrupted.store(true, Ordering::SeqCst);
break;
}
}
})
.or_else(|_| {
panic_vcpu_run_interrupted.store(true, Ordering::SeqCst);
error!("vCPU thread panicked");
panic_exit_evt.write(1)
})
.ok();
})
.map_err(Error::VcpuSpawn)?,
);
// On hot plug calls into this function entry_point is None. It is for
// those hotplug CPU additions that we need to set the inserting flag.
self.vcpu_states[usize::from(vcpu_id)].handle = handle;
self.vcpu_states[usize::from(vcpu_id)].inserting = inserting;
Ok(())
}
/// Start up as many vCPUs threads as needed to reach `desired_vcpus`
fn activate_vcpus(
&mut self,
desired_vcpus: u8,
inserting: bool,
paused: Option<bool>,
) -> Result<()> {
if desired_vcpus > self.config.max_vcpus {
return Err(Error::DesiredVCpuCountExceedsMax);
}
let vcpu_thread_barrier = Arc::new(Barrier::new(
(desired_vcpus - self.present_vcpus() + 1) as usize,
));
if let Some(paused) = paused {
self.vcpus_pause_signalled.store(paused, Ordering::SeqCst);
}
info!(
"Starting vCPUs: desired = {}, allocated = {}, present = {}, paused = {}",
desired_vcpus,
self.vcpus.len(),
self.present_vcpus(),
self.vcpus_pause_signalled.load(Ordering::SeqCst)
);
// This reuses any inactive vCPUs as well as any that were newly created
for vcpu_id in self.present_vcpus()..desired_vcpus {
let vcpu = Arc::clone(&self.vcpus[vcpu_id as usize]);
self.start_vcpu(vcpu, vcpu_id, vcpu_thread_barrier.clone(), inserting)?;
}
// Unblock all CPU threads.
vcpu_thread_barrier.wait();
Ok(())
}
fn mark_vcpus_for_removal(&mut self, desired_vcpus: u8) {
// Mark vCPUs for removal, actual removal happens on ejection
for cpu_id in desired_vcpus..self.present_vcpus() {
self.vcpu_states[usize::from(cpu_id)].removing = true;
}
}
fn remove_vcpu(&mut self, cpu_id: u8) -> Result<()> {
info!("Removing vCPU: cpu_id = {}", cpu_id);
let mut state = &mut self.vcpu_states[usize::from(cpu_id)];
state.kill.store(true, Ordering::SeqCst);
state.signal_thread();
state.join_thread()?;
state.handle = None;
// Once the thread has exited, clear the "kill" so that it can reused
state.kill.store(false, Ordering::SeqCst);
Ok(())
}
pub fn create_boot_vcpus(&mut self, entry_point: Option<EntryPoint>) -> Result<()> {
self.create_vcpus(self.boot_vcpus(), entry_point)
}
// Starts all the vCPUs that the VM is booting with. Blocks until all vCPUs are running.
pub fn start_boot_vcpus(&mut self, paused: bool) -> Result<()> {
self.activate_vcpus(self.boot_vcpus(), false, Some(paused))
}
pub fn start_restored_vcpus(&mut self) -> Result<()> {
self.activate_vcpus(self.vcpus.len() as u8, false, Some(true))
.map_err(|e| {
Error::StartRestoreVcpu(anyhow!("Failed to start restored vCPUs: {:#?}", e))
})?;
Ok(())
}
pub fn resize(&mut self, desired_vcpus: u8) -> Result<bool> {
if desired_vcpus.cmp(&self.present_vcpus()) == cmp::Ordering::Equal {
return Ok(false);
}
if !self.dynamic {
return Ok(false);
}
match desired_vcpus.cmp(&self.present_vcpus()) {
cmp::Ordering::Greater => {
self.create_vcpus(desired_vcpus, None)?;
self.activate_vcpus(desired_vcpus, true, None)?;
Ok(true)
}
cmp::Ordering::Less => {
self.mark_vcpus_for_removal(desired_vcpus);
Ok(true)
}
_ => Ok(false),
}
}
pub fn shutdown(&mut self) -> Result<()> {
// Tell the vCPUs to stop themselves next time they go through the loop
self.vcpus_kill_signalled.store(true, Ordering::SeqCst);
// Toggle the vCPUs pause boolean
self.vcpus_pause_signalled.store(false, Ordering::SeqCst);
// Unpark all the VCPU threads.
for state in self.vcpu_states.iter() {
state.unpark_thread();
}
// Signal to the spawned threads (vCPUs and console signal handler). For the vCPU threads
// this will interrupt the KVM_RUN ioctl() allowing the loop to check the boolean set
// above.
for state in self.vcpu_states.iter() {
state.signal_thread();
}
// Wait for all the threads to finish. This removes the state from the vector.
for mut state in self.vcpu_states.drain(..) {
state.join_thread()?;
}
Ok(())
}
#[cfg(feature = "tdx")]
pub fn initialize_tdx(&self, hob_address: u64) -> Result<()> {
for vcpu in &self.vcpus {
vcpu.lock()
.unwrap()
.vcpu
.tdx_init(hob_address)
.map_err(Error::InitializeTdx)?;
}
Ok(())
}
pub fn boot_vcpus(&self) -> u8 {
self.config.boot_vcpus
}
pub fn max_vcpus(&self) -> u8 {
self.config.max_vcpus
}
#[cfg(target_arch = "x86_64")]
pub fn common_cpuid(&self) -> Vec<CpuIdEntry> {
self.cpuid.clone()
}
fn present_vcpus(&self) -> u8 {
self.vcpu_states
.iter()
.fold(0, |acc, state| acc + state.active() as u8)
}
#[cfg(target_arch = "aarch64")]
pub fn get_mpidrs(&self) -> Vec<u64> {
self.vcpus
.iter()
.map(|cpu| cpu.lock().unwrap().get_mpidr())
.collect()
}
#[cfg(target_arch = "aarch64")]
pub fn get_saved_states(&self) -> Vec<CpuState> {
self.vcpus
.iter()
.map(|cpu| cpu.lock().unwrap().get_saved_state().unwrap())
.collect()
}
#[cfg(target_arch = "aarch64")]
pub fn get_vcpu_topology(&self) -> Option<(u8, u8, u8)> {
self.config
.topology
.clone()
.map(|t| (t.threads_per_core, t.cores_per_die, t.packages))
}
pub fn create_madt(&self) -> Sdt {
use crate::acpi;
// This is also checked in the commandline parsing.
assert!(self.config.boot_vcpus <= self.config.max_vcpus);
let mut madt = Sdt::new(*b"APIC", 44, 5, *b"CLOUDH", *b"CHMADT ", 1);
#[cfg(target_arch = "x86_64")]
{
madt.write(36, arch::layout::APIC_START);
for cpu in 0..self.config.max_vcpus {
let lapic = LocalApic {
r#type: acpi::ACPI_APIC_PROCESSOR,
length: 8,
processor_id: cpu,
apic_id: cpu,
flags: if cpu < self.config.boot_vcpus {
1 << MADT_CPU_ENABLE_FLAG
} else {
0
} | 1 << MADT_CPU_ONLINE_CAPABLE_FLAG,
};
madt.append(lapic);
}
madt.append(Ioapic {
r#type: acpi::ACPI_APIC_IO,
length: 12,
ioapic_id: 0,
apic_address: arch::layout::IOAPIC_START.0 as u32,
gsi_base: 0,
..Default::default()
});
madt.append(InterruptSourceOverride {
r#type: acpi::ACPI_APIC_XRUPT_OVERRIDE,
length: 10,
bus: 0,
source: 4,
gsi: 4,
flags: 0,
});
}
#[cfg(target_arch = "aarch64")]
{
use vm_memory::Address;
/* Notes:
* Ignore Local Interrupt Controller Address at byte offset 36 of MADT table.
*/
// See section 5.2.12.14 GIC CPU Interface (GICC) Structure in ACPI spec.
for cpu in 0..self.config.boot_vcpus {
let vcpu = &self.vcpus[cpu as usize];
let mpidr = vcpu.lock().unwrap().get_mpidr();
/* ARMv8 MPIDR format:
Bits [63:40] Must be zero
Bits [39:32] Aff3 : Match Aff3 of target processor MPIDR
Bits [31:24] Must be zero
Bits [23:16] Aff2 : Match Aff2 of target processor MPIDR
Bits [15:8] Aff1 : Match Aff1 of target processor MPIDR
Bits [7:0] Aff0 : Match Aff0 of target processor MPIDR
*/
let mpidr_mask = 0xff_00ff_ffff;
let gicc = GicC {
r#type: acpi::ACPI_APIC_GENERIC_CPU_INTERFACE,
length: 80,
reserved0: 0,
cpu_interface_number: cpu as u32,
uid: cpu as u32,
flags: 1,
parking_version: 0,
performance_interrupt: 0,
parked_address: 0,
base_address: 0,
gicv_base_address: 0,
gich_base_address: 0,
vgic_interrupt: 0,
gicr_base_address: 0,
mpidr: mpidr & mpidr_mask,
proc_power_effi_class: 0,
reserved1: 0,
spe_overflow_interrupt: 0,
};
madt.append(gicc);
}
// GIC Distributor structure. See section 5.2.12.15 in ACPI spec.
let gicd = GicD {
r#type: acpi::ACPI_APIC_GENERIC_DISTRIBUTOR,
length: 24,
reserved0: 0,
gic_id: 0,
base_address: arch::layout::MAPPED_IO_START.raw_value() - 0x0001_0000,
global_irq_base: 0,
version: 3,
reserved1: [0; 3],
};
madt.append(gicd);
// See 5.2.12.17 GIC Redistributor (GICR) Structure in ACPI spec.
let gicr_size: u32 = 0x0001_0000 * 2 * (self.config.boot_vcpus as u32);
let gicr_base: u64 =
arch::layout::MAPPED_IO_START.raw_value() - 0x0001_0000 - gicr_size as u64;
let gicr = GicR {
r#type: acpi::ACPI_APIC_GENERIC_REDISTRIBUTOR,
length: 16,
reserved: 0,
base_address: gicr_base,
range_length: gicr_size,
};
madt.append(gicr);
// See 5.2.12.18 GIC Interrupt Translation Service (ITS) Structure in ACPI spec.
let gicits = GicIts {
r#type: acpi::ACPI_APIC_GENERIC_TRANSLATOR,
length: 20,
reserved0: 0,
translation_id: 0,
base_address: gicr_base - 2 * 0x0001_0000,
reserved1: 0,
};
madt.append(gicits);
madt.update_checksum();
}
madt
}
#[cfg(target_arch = "aarch64")]
pub fn create_pptt(&self) -> Sdt {
let pptt_start = 0;
let mut cpus = 0;
let mut uid = 0;
// If topology is not specified, the default setting is:
// 1 package, multiple cores, 1 thread per core
// This is also the behavior when PPTT is missing.
let (threads_per_core, cores_per_package, packages) =
self.get_vcpu_topology().unwrap_or((1, self.max_vcpus(), 1));
let mut pptt = Sdt::new(*b"PPTT", 36, 2, *b"CLOUDH", *b"CHPPTT ", 1);
for cluster_idx in 0..packages {
if cpus < self.config.boot_vcpus as usize {
let cluster_offset = pptt.len() - pptt_start;
let cluster_hierarchy_node = ProcessorHierarchyNode {
r#type: 0,
length: 20,
reserved: 0,
flags: 0x2,
parent: 0,
acpi_processor_id: cluster_idx as u32,
num_private_resources: 0,
};
pptt.append(cluster_hierarchy_node);
for core_idx in 0..cores_per_package {
let core_offset = pptt.len() - pptt_start;
if threads_per_core > 1 {
let core_hierarchy_node = ProcessorHierarchyNode {
r#type: 0,
length: 20,
reserved: 0,
flags: 0x2,
parent: cluster_offset as u32,
acpi_processor_id: core_idx as u32,
num_private_resources: 0,
};
pptt.append(core_hierarchy_node);
for _thread_idx in 0..threads_per_core {
let thread_hierarchy_node = ProcessorHierarchyNode {
r#type: 0,
length: 20,
reserved: 0,
flags: 0xE,
parent: core_offset as u32,
acpi_processor_id: uid as u32,
num_private_resources: 0,
};
pptt.append(thread_hierarchy_node);
uid += 1;
}
} else {
let thread_hierarchy_node = ProcessorHierarchyNode {
r#type: 0,
length: 20,
reserved: 0,
flags: 0xA,
parent: cluster_offset as u32,
acpi_processor_id: uid as u32,
num_private_resources: 0,
};
pptt.append(thread_hierarchy_node);
uid += 1;
}
}
cpus += (cores_per_package * threads_per_core) as usize;
}
}
pptt.update_checksum();
pptt
}
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
fn get_regs(&self, cpu_id: u8) -> Result<StandardRegisters> {
self.vcpus[usize::from(cpu_id)]
.lock()
.unwrap()
.vcpu
.get_regs()
.map_err(Error::CpuDebug)
}
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
fn set_regs(&self, cpu_id: u8, regs: &StandardRegisters) -> Result<()> {
self.vcpus[usize::from(cpu_id)]
.lock()
.unwrap()
.vcpu
.set_regs(regs)
.map_err(Error::CpuDebug)
}
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
fn get_sregs(&self, cpu_id: u8) -> Result<SpecialRegisters> {
self.vcpus[usize::from(cpu_id)]
.lock()
.unwrap()
.vcpu
.get_sregs()
.map_err(Error::CpuDebug)
}
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
fn set_sregs(&self, cpu_id: u8, sregs: &SpecialRegisters) -> Result<()> {
self.vcpus[usize::from(cpu_id)]
.lock()
.unwrap()
.vcpu
.set_sregs(sregs)
.map_err(Error::CpuDebug)
}
#[cfg(all(target_arch = "x86_64", feature = "gdb"))]
fn translate_gva(&self, cpu_id: u8, gva: u64) -> Result<u64> {
let (gpa, _) = self.vcpus[usize::from(cpu_id)]
.lock()
.unwrap()
.vcpu
.translate_gva(gva, /* flags: unused */ 0)
.map_err(Error::TranslateVirtualAddress)?;
Ok(gpa)
}
}
struct Cpu {
cpu_id: u8,
proximity_domain: u32,
dynamic: bool,
}
#[cfg(target_arch = "x86_64")]
const MADT_CPU_ENABLE_FLAG: usize = 0;
#[cfg(target_arch = "x86_64")]
const MADT_CPU_ONLINE_CAPABLE_FLAG: usize = 1;
impl Cpu {
#[cfg(target_arch = "x86_64")]
fn generate_mat(&self) -> Vec<u8> {
let lapic = LocalApic {
r#type: 0,
length: 8,
processor_id: self.cpu_id,
apic_id: self.cpu_id,
flags: 1 << MADT_CPU_ENABLE_FLAG,
};
let mut mat_data: Vec<u8> = Vec::new();
mat_data.resize(std::mem::size_of_val(&lapic), 0);
unsafe { *(mat_data.as_mut_ptr() as *mut LocalApic) = lapic };
mat_data
}
}
impl Aml for Cpu {
fn append_aml_bytes(&self, bytes: &mut Vec<u8>) {
#[cfg(target_arch = "x86_64")]
let mat_data: Vec<u8> = self.generate_mat();
#[allow(clippy::if_same_then_else)]
if self.dynamic {
aml::Device::new(
format!("C{:03}", self.cpu_id).as_str().into(),
vec![
&aml::Name::new("_HID".into(), &"ACPI0007"),
&aml::Name::new("_UID".into(), &self.cpu_id),
// Currently, AArch64 cannot support following fields.
/*
_STA return value:
Bit [0] Set if the device is present.
Bit [1] Set if the device is enabled and decoding its resources.
Bit [2] Set if the device should be shown in the UI.
Bit [3] Set if the device is functioning properly (cleared if device failed its diagnostics).
Bit [4] Set if the battery is present.
Bits [31:5] Reserved (must be cleared).
*/
#[cfg(target_arch = "x86_64")]
&aml::Method::new(
"_STA".into(),
0,
false,
// Call into CSTA method which will interrogate device
vec![&aml::Return::new(&aml::MethodCall::new(
"CSTA".into(),
vec![&self.cpu_id],
))],
),
&aml::Method::new(
"_PXM".into(),
0,
false,
vec![&aml::Return::new(&self.proximity_domain)],
),
// The Linux kernel expects every CPU device to have a _MAT entry
// containing the LAPIC for this processor with the enabled bit set
// even it if is disabled in the MADT (non-boot CPU)
#[cfg(target_arch = "x86_64")]
&aml::Name::new("_MAT".into(), &aml::Buffer::new(mat_data)),
// Trigger CPU ejection
#[cfg(target_arch = "x86_64")]
&aml::Method::new(
"_EJ0".into(),
1,
false,
// Call into CEJ0 method which will actually eject device
vec![&aml::MethodCall::new("CEJ0".into(), vec![&self.cpu_id])],
),
],
)
.append_aml_bytes(bytes);
} else {
aml::Device::new(
format!("C{:03}", self.cpu_id).as_str().into(),
vec![
&aml::Name::new("_HID".into(), &"ACPI0007"),
&aml::Name::new("_UID".into(), &self.cpu_id),
#[cfg(target_arch = "x86_64")]
&aml::Method::new(
"_STA".into(),
0,
false,
// Mark CPU present see CSTA implementation
vec![&aml::Return::new(&0xfu8)],
),
&aml::Method::new(
"_PXM".into(),
0,
false,
vec![&aml::Return::new(&self.proximity_domain)],
),
// The Linux kernel expects every CPU device to have a _MAT entry
// containing the LAPIC for this processor with the enabled bit set
// even it if is disabled in the MADT (non-boot CPU)
#[cfg(target_arch = "x86_64")]
&aml::Name::new("_MAT".into(), &aml::Buffer::new(mat_data)),
],
)
.append_aml_bytes(bytes);
}
}
}
struct CpuNotify {
cpu_id: u8,
}
impl Aml for CpuNotify {
fn append_aml_bytes(&self, bytes: &mut Vec<u8>) {
let object = aml::Path::new(&format!("C{:03}", self.cpu_id));
aml::If::new(
&aml::Equal::new(&aml::Arg(0), &self.cpu_id),
vec![&aml::Notify::new(&object, &aml::Arg(1))],
)
.append_aml_bytes(bytes)
}
}
struct CpuMethods {
max_vcpus: u8,
dynamic: bool,
}
impl Aml for CpuMethods {
fn append_aml_bytes(&self, bytes: &mut Vec<u8>) {
if self.dynamic {
// CPU status method
aml::Method::new(
"CSTA".into(),
1,
true,
vec![
// Take lock defined above
&aml::Acquire::new("\\_SB_.PRES.CPLK".into(), 0xffff),
// Write CPU number (in first argument) to I/O port via field
&aml::Store::new(&aml::Path::new("\\_SB_.PRES.CSEL"), &aml::Arg(0)),
&aml::Store::new(&aml::Local(0), &aml::ZERO),
// Check if CPEN bit is set, if so make the local variable 0xf (see _STA for details of meaning)
&aml::If::new(
&aml::Equal::new(&aml::Path::new("\\_SB_.PRES.CPEN"), &aml::ONE),
vec![&aml::Store::new(&aml::Local(0), &0xfu8)],
),
// Release lock
&aml::Release::new("\\_SB_.PRES.CPLK".into()),
// Return 0 or 0xf
&aml::Return::new(&aml::Local(0)),
],
)
.append_aml_bytes(bytes);
let mut cpu_notifies = Vec::new();
for cpu_id in 0..self.max_vcpus {
cpu_notifies.push(CpuNotify { cpu_id });
}
let mut cpu_notifies_refs: Vec<&dyn aml::Aml> = Vec::new();
for cpu_id in 0..self.max_vcpus {
cpu_notifies_refs.push(&cpu_notifies[usize::from(cpu_id)]);
}
aml::Method::new("CTFY".into(), 2, true, cpu_notifies_refs).append_aml_bytes(bytes);
aml::Method::new(
"CEJ0".into(),
1,
true,
vec![
&aml::Acquire::new("\\_SB_.PRES.CPLK".into(), 0xffff),
// Write CPU number (in first argument) to I/O port via field
&aml::Store::new(&aml::Path::new("\\_SB_.PRES.CSEL"), &aml::Arg(0)),
// Set CEJ0 bit
&aml::Store::new(&aml::Path::new("\\_SB_.PRES.CEJ0"), &aml::ONE),
&aml::Release::new("\\_SB_.PRES.CPLK".into()),
],
)
.append_aml_bytes(bytes);
aml::Method::new(
"CSCN".into(),
0,
true,
vec![
// Take lock defined above
&aml::Acquire::new("\\_SB_.PRES.CPLK".into(), 0xffff),
&aml::Store::new(&aml::Local(0), &aml::ZERO),
&aml::While::new(
&aml::LessThan::new(&aml::Local(0), &self.max_vcpus),
vec![
// Write CPU number (in first argument) to I/O port via field
&aml::Store::new(&aml::Path::new("\\_SB_.PRES.CSEL"), &aml::Local(0)),
// Check if CINS bit is set
&aml::If::new(
&aml::Equal::new(&aml::Path::new("\\_SB_.PRES.CINS"), &aml::ONE),
// Notify device if it is
vec![
&aml::MethodCall::new(
"CTFY".into(),
vec![&aml::Local(0), &aml::ONE],
),
// Reset CINS bit
&aml::Store::new(
&aml::Path::new("\\_SB_.PRES.CINS"),
&aml::ONE,
),
],
),
// Check if CRMV bit is set
&aml::If::new(
&aml::Equal::new(&aml::Path::new("\\_SB_.PRES.CRMV"), &aml::ONE),
// Notify device if it is (with the eject constant 0x3)
vec![
&aml::MethodCall::new(
"CTFY".into(),
vec![&aml::Local(0), &3u8],
),
// Reset CRMV bit
&aml::Store::new(
&aml::Path::new("\\_SB_.PRES.CRMV"),
&aml::ONE,
),
],
),
&aml::Add::new(&aml::Local(0), &aml::Local(0), &aml::ONE),
],
),
// Release lock
&aml::Release::new("\\_SB_.PRES.CPLK".into()),
],
)
.append_aml_bytes(bytes)
} else {
aml::Method::new("CSCN".into(), 0, true, vec![]).append_aml_bytes(bytes)
}
}
}
impl Aml for CpuManager {
fn append_aml_bytes(&self, bytes: &mut Vec<u8>) {
#[cfg(target_arch = "x86_64")]
if let Some(acpi_address) = self.acpi_address {
// CPU hotplug controller
aml::Device::new(
"_SB_.PRES".into(),
vec![
&aml::Name::new("_HID".into(), &aml::EisaName::new("PNP0A06")),
&aml::Name::new("_UID".into(), &"CPU Hotplug Controller"),
// Mutex to protect concurrent access as we write to choose CPU and then read back status
&aml::Mutex::new("CPLK".into(), 0),
&aml::Name::new(
"_CRS".into(),
&aml::ResourceTemplate::new(vec![&aml::AddressSpace::new_memory(
aml::AddressSpaceCachable::NotCacheable,
true,
acpi_address.0 as u64,
acpi_address.0 + CPU_MANAGER_ACPI_SIZE as u64 - 1,
)]),
),
// OpRegion and Fields map MMIO range into individual field values
&aml::OpRegion::new(
"PRST".into(),
aml::OpRegionSpace::SystemMemory,
acpi_address.0 as usize,
CPU_MANAGER_ACPI_SIZE,
),
&aml::Field::new(
"PRST".into(),
aml::FieldAccessType::Byte,
aml::FieldUpdateRule::WriteAsZeroes,
vec![
aml::FieldEntry::Reserved(32),
aml::FieldEntry::Named(*b"CPEN", 1),
aml::FieldEntry::Named(*b"CINS", 1),
aml::FieldEntry::Named(*b"CRMV", 1),
aml::FieldEntry::Named(*b"CEJ0", 1),
aml::FieldEntry::Reserved(4),
aml::FieldEntry::Named(*b"CCMD", 8),
],
),
&aml::Field::new(
"PRST".into(),
aml::FieldAccessType::DWord,
aml::FieldUpdateRule::Preserve,
vec![
aml::FieldEntry::Named(*b"CSEL", 32),
aml::FieldEntry::Reserved(32),
aml::FieldEntry::Named(*b"CDAT", 32),
],
),
],
)
.append_aml_bytes(bytes);
}
// CPU devices
let hid = aml::Name::new("_HID".into(), &"ACPI0010");
let uid = aml::Name::new("_CID".into(), &aml::EisaName::new("PNP0A05"));
// Bundle methods together under a common object
let methods = CpuMethods {
max_vcpus: self.config.max_vcpus,
dynamic: self.dynamic,
};
let mut cpu_data_inner: Vec<&dyn aml::Aml> = vec![&hid, &uid, &methods];
let mut cpu_devices = Vec::new();
for cpu_id in 0..self.config.max_vcpus {
let proximity_domain = *self.proximity_domain_per_cpu.get(&cpu_id).unwrap_or(&0);
let cpu_device = Cpu {
cpu_id,
proximity_domain,
dynamic: self.dynamic,
};
cpu_devices.push(cpu_device);
}
for cpu_device in cpu_devices.iter() {
cpu_data_inner.push(cpu_device);
}
aml::Device::new("_SB_.CPUS".into(), cpu_data_inner).append_aml_bytes(bytes)
}
}
impl Pausable for CpuManager {
fn pause(&mut self) -> std::result::Result<(), MigratableError> {
// Tell the vCPUs to pause themselves next time they exit
self.vcpus_pause_signalled.store(true, Ordering::SeqCst);
// Signal to the spawned threads (vCPUs and console signal handler). For the vCPU threads
// this will interrupt the KVM_RUN ioctl() allowing the loop to check the boolean set
// above.
for state in self.vcpu_states.iter() {
state.signal_thread();
}
for vcpu in self.vcpus.iter() {
let mut vcpu = vcpu.lock().unwrap();
vcpu.pause()?;
#[cfg(all(feature = "kvm", target_arch = "x86_64"))]
if !self.config.kvm_hyperv {
vcpu.vcpu.notify_guest_clock_paused().map_err(|e| {
MigratableError::Pause(anyhow!(
"Could not notify guest it has been paused {:?}",
e
))
})?;
}
}
Ok(())
}
fn resume(&mut self) -> std::result::Result<(), MigratableError> {
for vcpu in self.vcpus.iter() {
vcpu.lock().unwrap().resume()?;
}
// Toggle the vCPUs pause boolean
self.vcpus_pause_signalled.store(false, Ordering::SeqCst);
// Unpark all the VCPU threads.
// Once unparked, the next thing they will do is checking for the pause
// boolean. Since it'll be set to false, they will exit their pause loop
// and go back to vmx root.
for state in self.vcpu_states.iter() {
state.unpark_thread();
}
Ok(())
}
}
impl Snapshottable for CpuManager {
fn id(&self) -> String {
CPU_MANAGER_SNAPSHOT_ID.to_string()
}
fn snapshot(&mut self) -> std::result::Result<Snapshot, MigratableError> {
let mut cpu_manager_snapshot = Snapshot::new(CPU_MANAGER_SNAPSHOT_ID);
// The CpuManager snapshot is a collection of all vCPUs snapshots.
for vcpu in &self.vcpus {
let cpu_snapshot = vcpu.lock().unwrap().snapshot()?;
cpu_manager_snapshot.add_snapshot(cpu_snapshot);
}
Ok(cpu_manager_snapshot)
}
fn restore(&mut self, snapshot: Snapshot) -> std::result::Result<(), MigratableError> {
for (cpu_id, snapshot) in snapshot.snapshots.iter() {
info!("Restoring VCPU {}", cpu_id);
self.create_vcpu(cpu_id.parse::<u8>().unwrap(), None, Some(*snapshot.clone()))
.map_err(|e| MigratableError::Restore(anyhow!("Could not create vCPU {:?}", e)))?;
}
Ok(())
}
}
impl Transportable for CpuManager {}
impl Migratable for CpuManager {}
#[cfg(feature = "gdb")]
impl Debuggable for CpuManager {
#[cfg(feature = "kvm")]
fn set_guest_debug(
&self,
cpu_id: usize,
addrs: &[GuestAddress],
singlestep: bool,
) -> std::result::Result<(), DebuggableError> {
self.vcpus[cpu_id]
.lock()
.unwrap()
.vcpu
.set_guest_debug(addrs, singlestep)
.map_err(DebuggableError::SetDebug)
}
fn debug_pause(&mut self) -> std::result::Result<(), DebuggableError> {
Ok(())
}
fn debug_resume(&mut self) -> std::result::Result<(), DebuggableError> {
Ok(())
}
#[cfg(target_arch = "x86_64")]
fn read_regs(&self, cpu_id: usize) -> std::result::Result<X86_64CoreRegs, DebuggableError> {
// General registers: RAX, RBX, RCX, RDX, RSI, RDI, RBP, RSP, r8-r15
let gregs = self
.get_regs(cpu_id as u8)
.map_err(DebuggableError::ReadRegs)?;
let regs = [
gregs.rax, gregs.rbx, gregs.rcx, gregs.rdx, gregs.rsi, gregs.rdi, gregs.rbp, gregs.rsp,
gregs.r8, gregs.r9, gregs.r10, gregs.r11, gregs.r12, gregs.r13, gregs.r14, gregs.r15,
];
// GDB exposes 32-bit eflags instead of 64-bit rflags.
// https://github.com/bminor/binutils-gdb/blob/master/gdb/features/i386/64bit-core.xml
let eflags = gregs.rflags as u32;
let rip = gregs.rip;
// Segment registers: CS, SS, DS, ES, FS, GS
let sregs = self
.get_sregs(cpu_id as u8)
.map_err(DebuggableError::ReadRegs)?;
let segments = X86SegmentRegs {
cs: sregs.cs.selector as u32,
ss: sregs.ss.selector as u32,
ds: sregs.ds.selector as u32,
es: sregs.es.selector as u32,
fs: sregs.fs.selector as u32,
gs: sregs.gs.selector as u32,
};
// TODO: Add other registers
Ok(X86_64CoreRegs {
regs,
eflags,
rip,
segments,
..Default::default()
})
}
#[cfg(target_arch = "x86_64")]
fn write_regs(
&self,
cpu_id: usize,
regs: &X86_64CoreRegs,
) -> std::result::Result<(), DebuggableError> {
let orig_gregs = self
.get_regs(cpu_id as u8)
.map_err(DebuggableError::ReadRegs)?;
let gregs = StandardRegisters {
rax: regs.regs[0],
rbx: regs.regs[1],
rcx: regs.regs[2],
rdx: regs.regs[3],
rsi: regs.regs[4],
rdi: regs.regs[5],
rbp: regs.regs[6],
rsp: regs.regs[7],
r8: regs.regs[8],
r9: regs.regs[9],
r10: regs.regs[10],
r11: regs.regs[11],
r12: regs.regs[12],
r13: regs.regs[13],
r14: regs.regs[14],
r15: regs.regs[15],
rip: regs.rip,
// Update the lower 32-bit of rflags.
rflags: (orig_gregs.rflags & !(u32::MAX as u64)) | (regs.eflags as u64),
};
self.set_regs(cpu_id as u8, &gregs)
.map_err(DebuggableError::WriteRegs)?;
// Segment registers: CS, SS, DS, ES, FS, GS
// Since GDB care only selectors, we call get_sregs() first.
let mut sregs = self
.get_sregs(cpu_id as u8)
.map_err(DebuggableError::ReadRegs)?;
sregs.cs.selector = regs.segments.cs as u16;
sregs.ss.selector = regs.segments.ss as u16;
sregs.ds.selector = regs.segments.ds as u16;
sregs.es.selector = regs.segments.es as u16;
sregs.fs.selector = regs.segments.fs as u16;
sregs.gs.selector = regs.segments.gs as u16;
self.set_sregs(cpu_id as u8, &sregs)
.map_err(DebuggableError::WriteRegs)?;
// TODO: Add other registers
Ok(())
}
#[cfg(target_arch = "x86_64")]
fn read_mem(
&self,
cpu_id: usize,
vaddr: GuestAddress,
len: usize,
) -> std::result::Result<Vec<u8>, DebuggableError> {
let mut buf = vec![0; len];
let mut total_read = 0_u64;
while total_read < len as u64 {
let gaddr = vaddr.0 + total_read;
let paddr = match self.translate_gva(cpu_id as u8, gaddr) {
Ok(paddr) => paddr,
Err(_) if gaddr == u64::MIN => gaddr, // Silently return GVA as GPA if GVA == 0.
Err(e) => return Err(DebuggableError::TranslateGva(e)),
};
let psize = arch::PAGE_SIZE as u64;
let read_len = std::cmp::min(len as u64 - total_read, psize - (paddr & (psize - 1)));
self.vm_memory
.memory()
.read(
&mut buf[total_read as usize..total_read as usize + read_len as usize],
GuestAddress(paddr),
)
.map_err(DebuggableError::ReadMem)?;
total_read += read_len;
}
Ok(buf)
}
#[cfg(target_arch = "x86_64")]
fn write_mem(
&self,
cpu_id: usize,
vaddr: &GuestAddress,
data: &[u8],
) -> std::result::Result<(), DebuggableError> {
let mut total_written = 0_u64;
while total_written < data.len() as u64 {
let gaddr = vaddr.0 + total_written;
let paddr = match self.translate_gva(cpu_id as u8, gaddr) {
Ok(paddr) => paddr,
Err(_) if gaddr == u64::MIN => gaddr, // Silently return GVA as GPA if GVA == 0.
Err(e) => return Err(DebuggableError::TranslateGva(e)),
};
let psize = arch::PAGE_SIZE as u64;
let write_len = std::cmp::min(
data.len() as u64 - total_written,
psize - (paddr & (psize - 1)),
);
self.vm_memory
.memory()
.write(
&data[total_written as usize..total_written as usize + write_len as usize],
GuestAddress(paddr),
)
.map_err(DebuggableError::WriteMem)?;
total_written += write_len;
}
Ok(())
}
fn active_vcpus(&self) -> usize {
self.present_vcpus() as usize
}
}
#[cfg(feature = "guest_debug")]
impl Elf64Writable for CpuManager {}
#[cfg(feature = "guest_debug")]
impl CpuElf64Writable for CpuManager {
fn cpu_write_elf64_note(
&mut self,
dump_state: &DumpState,
) -> std::result::Result<(), GuestDebuggableError> {
let mut coredump_file = dump_state.file.as_ref().unwrap();
for vcpu in &self.vcpus {
let note_size = self.get_note_size(NoteDescType::Elf, 1);
let mut pos: usize = 0;
let mut buf = vec![0; note_size as usize];
let descsz = size_of::<X86_64ElfPrStatus>();
let vcpu_id = vcpu.lock().unwrap().id;
let note = Elf64_Nhdr {
n_namesz: COREDUMP_NAME_SIZE,
n_descsz: descsz as u32,
n_type: NT_PRSTATUS,
};
let bytes: &[u8] = note.as_slice();
buf.splice(0.., bytes.to_vec());
pos += round_up!(size_of::<Elf64_Nhdr>(), 4);
buf.resize(pos + 4, 0);
buf.splice(pos.., "CORE".to_string().into_bytes());
pos += round_up!(COREDUMP_NAME_SIZE as usize, 4);
buf.resize(pos + 32 + 4, 0);
let pid = vcpu_id as u64;
let bytes: &[u8] = pid.as_slice();
buf.splice(pos + 32.., bytes.to_vec()); /* pr_pid */
pos += descsz - size_of::<X86_64UserRegs>() - size_of::<u64>();
let orig_rax: u64 = 0;
let gregs = self.vcpus[usize::from(vcpu_id)]
.lock()
.unwrap()
.vcpu
.get_regs()
.map_err(|_e| GuestDebuggableError::Coredump(anyhow!("get regs failed")))?;
let regs1 = [
gregs.r15, gregs.r14, gregs.r13, gregs.r12, gregs.rbp, gregs.rbx, gregs.r11,
gregs.r10,
];
let regs2 = [
gregs.r9, gregs.r8, gregs.rax, gregs.rcx, gregs.rdx, gregs.rsi, gregs.rdi, orig_rax,
];
let sregs = self.vcpus[usize::from(vcpu_id)]
.lock()
.unwrap()
.vcpu
.get_sregs()
.map_err(|_e| GuestDebuggableError::Coredump(anyhow!("get sregs failed")))?;
debug!(
"rip 0x{:x} rsp 0x{:x} gs 0x{:x} cs 0x{:x} ss 0x{:x} ds 0x{:x}",
gregs.rip,
gregs.rsp,
sregs.gs.base,
sregs.cs.selector,
sregs.ss.selector,
sregs.ds.selector,
);
let regs = X86_64UserRegs {
regs1,
regs2,
rip: gregs.rip,
cs: sregs.cs.selector as u64,
eflags: gregs.rflags,
rsp: gregs.rsp,
ss: sregs.ss.selector as u64,
fs_base: sregs.fs.base as u64,
gs_base: sregs.gs.base as u64,
ds: sregs.ds.selector as u64,
es: sregs.es.selector as u64,
fs: sregs.fs.selector as u64,
gs: sregs.gs.selector as u64,
};
// let bytes: &[u8] = unsafe { any_as_u8_slice(&regs) };
let bytes: &[u8] = regs.as_slice();
buf.resize(note_size as usize, 0);
buf.splice(pos.., bytes.to_vec());
buf.resize(note_size as usize, 0);
coredump_file
.write(&buf)
.map_err(GuestDebuggableError::CoredumpFile)?;
}
Ok(())
}
fn cpu_write_vmm_note(
&mut self,
dump_state: &DumpState,
) -> std::result::Result<(), GuestDebuggableError> {
let mut coredump_file = dump_state.file.as_ref().unwrap();
for vcpu in &self.vcpus {
let note_size = self.get_note_size(NoteDescType::Vmm, 1);
let mut pos: usize = 0;
let mut buf = vec![0; note_size as usize];
let descsz = size_of::<DumpCpusState>();
let vcpu_id = vcpu.lock().unwrap().id;
let note = Elf64_Nhdr {
n_namesz: COREDUMP_NAME_SIZE,
n_descsz: descsz as u32,
n_type: 0,
};
let bytes: &[u8] = note.as_slice();
buf.splice(0.., bytes.to_vec());
pos += round_up!(size_of::<Elf64_Nhdr>(), 4);
buf.resize(pos + 4, 0);
buf.splice(pos.., "QEMU".to_string().into_bytes());
pos += round_up!(COREDUMP_NAME_SIZE as usize, 4);
let gregs = self.vcpus[usize::from(vcpu_id)]
.lock()
.unwrap()
.vcpu
.get_regs()
.map_err(|_e| GuestDebuggableError::Coredump(anyhow!("get regs failed")))?;
let regs1 = [
gregs.rax, gregs.rbx, gregs.rcx, gregs.rdx, gregs.rsi, gregs.rdi, gregs.rsp,
gregs.rbp,
];
let regs2 = [
gregs.r8, gregs.r9, gregs.r10, gregs.r11, gregs.r12, gregs.r13, gregs.r14,
gregs.r15,
];
let sregs = self.vcpus[usize::from(vcpu_id)]
.lock()
.unwrap()
.vcpu
.get_sregs()
.map_err(|_e| GuestDebuggableError::Coredump(anyhow!("get sregs failed")))?;
let mut msrs = vec![MsrEntry {
index: msr_index::MSR_KERNEL_GS_BASE,
..Default::default()
}];
self.vcpus[vcpu_id as usize]
.lock()
.unwrap()
.vcpu
.get_msrs(&mut msrs)
.map_err(|_e| GuestDebuggableError::Coredump(anyhow!("get msr failed")))?;
let kernel_gs_base = msrs[0].data;
let cs = CpuSegment::new(sregs.cs);
let ds = CpuSegment::new(sregs.ds);
let es = CpuSegment::new(sregs.es);
let fs = CpuSegment::new(sregs.fs);
let gs = CpuSegment::new(sregs.gs);
let ss = CpuSegment::new(sregs.ss);
let ldt = CpuSegment::new(sregs.ldt);
let tr = CpuSegment::new(sregs.tr);
let gdt = CpuSegment::new_from_table(sregs.gdt);
let idt = CpuSegment::new_from_table(sregs.idt);
let cr = [sregs.cr0, sregs.cr8, sregs.cr2, sregs.cr3, sregs.cr4];
let regs = DumpCpusState {
version: 1,
size: size_of::<DumpCpusState>() as u32,
regs1,
regs2,
rip: gregs.rip,
rflags: gregs.rflags,
cs,
ds,
es,
fs,
gs,
ss,
ldt,
tr,
gdt,
idt,
cr,
kernel_gs_base,
};
let bytes: &[u8] = regs.as_slice();
buf.resize(note_size as usize, 0);
buf.splice(pos.., bytes.to_vec());
buf.resize(note_size as usize, 0);
coredump_file
.write(&buf)
.map_err(GuestDebuggableError::CoredumpFile)?;
}
Ok(())
}
}
#[cfg(all(feature = "kvm", target_arch = "x86_64"))]
#[cfg(test)]
mod tests {
use arch::x86_64::interrupts::*;
use arch::x86_64::regs::*;
use hypervisor::arch::x86::{FpuState, LapicState, StandardRegisters};
#[test]
fn test_setlint() {
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().expect("new VM fd creation failed");
assert!(hv.check_required_extensions().is_ok());
// Calling get_lapic will fail if there is no irqchip before hand.
assert!(vm.create_irq_chip().is_ok());
let vcpu = vm.create_vcpu(0, None).unwrap();
let klapic_before: LapicState = vcpu.get_lapic().unwrap();
// Compute the value that is expected to represent LVT0 and LVT1.
let lint0 = klapic_before.get_klapic_reg(APIC_LVT0);
let lint1 = klapic_before.get_klapic_reg(APIC_LVT1);
let lint0_mode_expected = set_apic_delivery_mode(lint0, APIC_MODE_EXTINT);
let lint1_mode_expected = set_apic_delivery_mode(lint1, APIC_MODE_NMI);
set_lint(&vcpu).unwrap();
// Compute the value that represents LVT0 and LVT1 after set_lint.
let klapic_actual: LapicState = vcpu.get_lapic().unwrap();
let lint0_mode_actual = klapic_actual.get_klapic_reg(APIC_LVT0);
let lint1_mode_actual = klapic_actual.get_klapic_reg(APIC_LVT1);
assert_eq!(lint0_mode_expected, lint0_mode_actual);
assert_eq!(lint1_mode_expected, lint1_mode_actual);
}
#[test]
fn test_setup_fpu() {
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().expect("new VM fd creation failed");
let vcpu = vm.create_vcpu(0, None).unwrap();
setup_fpu(&vcpu).unwrap();
let expected_fpu: FpuState = FpuState {
fcw: 0x37f,
mxcsr: 0x1f80,
..Default::default()
};
let actual_fpu: FpuState = vcpu.get_fpu().unwrap();
// TODO: auto-generate kvm related structures with PartialEq on.
assert_eq!(expected_fpu.fcw, actual_fpu.fcw);
// Setting the mxcsr register from FpuState inside setup_fpu does not influence anything.
// See 'kvm_arch_vcpu_ioctl_set_fpu' from arch/x86/kvm/x86.c.
// The mxcsr will stay 0 and the assert below fails. Decide whether or not we should
// remove it at all.
// assert!(expected_fpu.mxcsr == actual_fpu.mxcsr);
}
#[test]
fn test_setup_msrs() {
use hypervisor::arch::x86::{msr_index, MsrEntry};
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().expect("new VM fd creation failed");
let vcpu = vm.create_vcpu(0, None).unwrap();
setup_msrs(&vcpu).unwrap();
// This test will check against the last MSR entry configured (the tenth one).
// See create_msr_entries for details.
let mut msrs = vec![MsrEntry {
index: msr_index::MSR_IA32_MISC_ENABLE,
..Default::default()
}];
// get_msrs returns the number of msrs that it succeed in reading. We only want to read 1
// in this test case scenario.
let read_msrs = vcpu.get_msrs(&mut msrs).unwrap();
assert_eq!(read_msrs, 1);
// Official entries that were setup when we did setup_msrs. We need to assert that the
// tenth one (i.e the one with index msr_index::MSR_IA32_MISC_ENABLE has the data we
// expect.
let entry_vec = vcpu.boot_msr_entries();
assert_eq!(entry_vec.as_slice()[9], msrs.as_slice()[0]);
}
#[test]
fn test_setup_regs() {
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().expect("new VM fd creation failed");
let vcpu = vm.create_vcpu(0, None).unwrap();
let expected_regs: StandardRegisters = StandardRegisters {
rflags: 0x0000000000000002u64,
rbx: arch::layout::PVH_INFO_START.0,
rip: 1,
..Default::default()
};
setup_regs(&vcpu, expected_regs.rip).unwrap();
let actual_regs: StandardRegisters = vcpu.get_regs().unwrap();
assert_eq!(actual_regs, expected_regs);
}
}
#[cfg(target_arch = "aarch64")]
#[cfg(test)]
mod tests {
use arch::{aarch64::regs, layout};
use hypervisor::kvm::aarch64::is_system_register;
use hypervisor::kvm::kvm_bindings::{
kvm_regs, kvm_vcpu_init, user_pt_regs, KVM_REG_ARM64, KVM_REG_ARM64_SYSREG,
KVM_REG_ARM_CORE, KVM_REG_SIZE_U64,
};
use hypervisor::{arm64_core_reg_id, offset__of};
use std::mem;
#[test]
fn test_setup_regs() {
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().unwrap();
let vcpu = vm.create_vcpu(0, None).unwrap();
let res = vcpu.setup_regs(0, 0x0, layout::FDT_START.0);
// Must fail when vcpu is not initialized yet.
assert!(res.is_err());
let mut kvi: kvm_vcpu_init = kvm_vcpu_init::default();
vm.get_preferred_target(&mut kvi).unwrap();
vcpu.vcpu_init(&kvi).unwrap();
assert!(vcpu.setup_regs(0, 0x0, layout::FDT_START.0).is_ok());
}
#[test]
fn test_read_mpidr() {
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().unwrap();
let vcpu = vm.create_vcpu(0, None).unwrap();
let mut kvi: kvm_vcpu_init = kvm_vcpu_init::default();
vm.get_preferred_target(&mut kvi).unwrap();
// Must fail when vcpu is not initialized yet.
assert!(vcpu.get_sys_reg(regs::MPIDR_EL1).is_err());
vcpu.vcpu_init(&kvi).unwrap();
assert_eq!(vcpu.get_sys_reg(regs::MPIDR_EL1).unwrap(), 0x80000000);
}
#[test]
fn test_is_system_register() {
let offset = offset__of!(user_pt_regs, pc);
let regid = arm64_core_reg_id!(KVM_REG_SIZE_U64, offset);
assert!(!is_system_register(regid));
let regid = KVM_REG_ARM64 as u64 | KVM_REG_SIZE_U64 as u64 | KVM_REG_ARM64_SYSREG as u64;
assert!(is_system_register(regid));
}
#[test]
fn test_save_restore_core_regs() {
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().unwrap();
let vcpu = vm.create_vcpu(0, None).unwrap();
let mut kvi: kvm_vcpu_init = kvm_vcpu_init::default();
vm.get_preferred_target(&mut kvi).unwrap();
// Must fail when vcpu is not initialized yet.
let res = vcpu.get_regs();
assert!(res.is_err());
assert_eq!(
format!("{}", res.unwrap_err()),
"Failed to get core register: Exec format error (os error 8)"
);
let mut state = kvm_regs::default();
let res = vcpu.set_regs(&state);
assert!(res.is_err());
assert_eq!(
format!("{}", res.unwrap_err()),
"Failed to set core register: Exec format error (os error 8)"
);
vcpu.vcpu_init(&kvi).unwrap();
let res = vcpu.get_regs();
assert!(res.is_ok());
state = res.unwrap();
assert_eq!(state.regs.pstate, 0x3C5);
assert!(vcpu.set_regs(&state).is_ok());
}
#[test]
fn test_get_set_mpstate() {
let hv = hypervisor::new().unwrap();
let vm = hv.create_vm().unwrap();
let vcpu = vm.create_vcpu(0, None).unwrap();
let mut kvi: kvm_vcpu_init = kvm_vcpu_init::default();
vm.get_preferred_target(&mut kvi).unwrap();
let res = vcpu.get_mp_state();
assert!(res.is_ok());
assert!(vcpu.set_mp_state(res.unwrap()).is_ok());
}
}