libvirt/tests/qemuxmlconfdata/input-usbmouse-addr.xml

<domain type='qemu'>
  <name>QEMUGuest1</name>
  <uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
  <memory unit='KiB'>219136</memory>
  <currentMemory unit='KiB'>219136</currentMemory>
  <vcpu placement='static'>1</vcpu>
  <os>
    <type arch='x86_64' machine='pc'>hvm</type>
    <boot dev='hd'/>
  </os>
  <clock offset='utc'/>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>destroy</on_crash>
  <devices>
    <emulator>/usr/bin/qemu-system-x86_64</emulator>
    <disk type='block' device='disk'>
      <source dev='/dev/HostVG/QEMUGuest1'/>
      <target dev='hda' bus='ide'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <controller type='usb' index='0'/>
    <controller type='ide' index='0'/>
    <input type='mouse' bus='usb'>
      <address type='usb' bus='0' port='2'/>
    </input>
  </devices>
</domain>
USB devices gain a new USB address child element Expand the domain and the QEmu driver code Adds a couple of tests 2011-09-02 13:28:27 +00:00			`<domain type='qemu'>`
			`<name>QEMUGuest1</name>`
			`<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>`
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(memory\\|currentMemory\\|hard_limit\\|soft_limit\\|min_guarantee\\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/data tests/out -name '.xml' \| \ xargs sed -i 's/<\(capacity\\|allocation\\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/data/.xml: Update all tests. * tests/out/.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise. 2012-02-23 00:48:38 +00:00			`<memory unit='KiB'>219136</memory>`
			`<currentMemory unit='KiB'>219136</currentMemory>`
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs). 2012-05-08 16:04:36 +00:00			`<vcpu placement='static'>1</vcpu>`
USB devices gain a new USB address child element Expand the domain and the QEmu driver code Adds a couple of tests 2011-09-02 13:28:27 +00:00			`<os>`
qemuxml2argvdata: Replace 'qemu-system-i386' by 'qemu-system-x86_64' in most test files Replace the emulator and architecture to x86_64, for all non-cpu related test cases. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> 2023-08-10 14:00:50 +00:00			`<type arch='x86_64' machine='pc'>hvm</type>`
USB devices gain a new USB address child element Expand the domain and the QEmu driver code Adds a couple of tests 2011-09-02 13:28:27 +00:00			`<boot dev='hd'/>`
			`</os>`
			`<clock offset='utc'/>`
			`<on_poweroff>destroy</on_poweroff>`
			`<on_reboot>restart</on_reboot>`
			`<on_crash>destroy</on_crash>`
			`<devices>`
qemuxml2argvdata: Replace 'qemu-system-i386' by 'qemu-system-x86_64' in most test files Replace the emulator and architecture to x86_64, for all non-cpu related test cases. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> 2023-08-10 14:00:50 +00:00			`<emulator>/usr/bin/qemu-system-x86_64</emulator>`
USB devices gain a new USB address child element Expand the domain and the QEmu driver code Adds a couple of tests 2011-09-02 13:28:27 +00:00			`<disk type='block' device='disk'>`
			`<source dev='/dev/HostVG/QEMUGuest1'/>`
			`<target dev='hda' bus='ide'/>`
conf: Introduce new attribute for device address format * src/conf/domain_conf.h: Add new member "target" to struct _virDomainDeviceDriveAddress. * src/conf/domain_conf.c: Parse and format "target" * Lots of tests (.xml) in tests/domainsnapshotxml2xmlout, tests/qemuxml2argvdata, tests/qemuxml2xmloutdata, and tests/vmx2xmldata/ are modified for newly introduced attribute "target" for address of "drive" type. 2012-02-27 10:19:54 +00:00			`<address type='drive' controller='0' bus='0' target='0' unit='0'/>`
USB devices gain a new USB address child element Expand the domain and the QEmu driver code Adds a couple of tests 2011-09-02 13:28:27 +00:00			`</disk>`
domain: add implicit USB controller Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change. 2012-02-08 00:48:25 +00:00			`<controller type='usb' index='0'/>`
USB devices gain a new USB address child element Expand the domain and the QEmu driver code Adds a couple of tests 2011-09-02 13:28:27 +00:00			`<controller type='ide' index='0'/>`
			`<input type='mouse' bus='usb'>`
Fix USB port in input-usbmouse test The default USB controller only has two ports. 2016-04-20 12:25:47 +00:00			`<address type='usb' bus='0' port='2'/>`
USB devices gain a new USB address child element Expand the domain and the QEmu driver code Adds a couple of tests 2011-09-02 13:28:27 +00:00			`</input>`
			`</devices>`
			`</domain>`