libvirt/src/security/security_driver.h

126 lines
5.8 KiB
C
Raw Normal View History

/*
build: consistently use C99 varargs macros Prior to this patch, there was an inconsistent mix between GNU and C99. For consistency, and potential portability to other compilers, stick with the C99 vararg macro syntax. * src/conf/cpu_conf.c (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/conf/domain_conf.c (virDomainReportError): Likewise. * src/conf/domain_event.c (eventReportError): Likewise. * src/conf/interface_conf.c (virInterfaceReportError): Likewise. * src/conf/network_conf.c (virNetworkReportError): Likewise. * src/conf/node_device_conf.h (virNodeDeviceReportError): Likewise. * src/conf/secret_conf.h (virSecretReportError): Likewise. * src/conf/storage_conf.h (virStorageReportError): Likewise. * src/esx/esx_device_monitor.c (ESX_ERROR): Use C99 rather than GNU vararg macro syntax. * src/esx/esx_driver.c (ESX_ERROR): Likewise. * src/esx/esx_interface_driver.c (ESX_ERROR): Likewise. * src/esx/esx_network_driver.c (ESX_ERROR): Likewise. * src/esx/esx_secret_driver.c (ESX_ERROR): Likewise. * src/esx/esx_storage_driver.c (ESX_ERROR): Likewise. * src/esx/esx_util.c (ESX_ERROR): Likewise. * src/esx/esx_vi.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_methods.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vi_types.c (ESX_VI_ERROR): Likewise. * src/esx/esx_vmx.c (ESX_ERROR): Likewise. * src/util/hostusb.c (usbReportError): Use C99 rather than GNU vararg macro syntax. * src/util/json.c (virJSONError): Likewise. * src/util/macvtap.c (ReportError): Likewise. * src/util/pci.c (pciReportError): Likewise. * src/util/stats_linux.c (virStatsError): Likewise. * src/util/util.c (virUtilError): Likewise. * src/util/xml.c (virXMLError): Likewise. * src/xen/proxy_internal.c (virProxyError): Use C99 rather than GNU vararg macro syntax. * src/xen/sexpr.c (virSexprError): Likewise. * src/xen/xen_driver.c (xenUnifiedError): Likewise. * src/xen/xen_hypervisor.c (virXenError): Likewise. * src/xen/xen_inotify.c (virXenInotifyError): Likewise. * src/xen/xend_internal.c (virXendError): Likewise. * src/xen/xm_internal.c (xenXMError): Likewise. * src/xen/xs_internal.c (virXenStoreError): Likewise. * src/cpu/cpu.h (virCPUReportError): Use C99 rather than GNU vararg macro syntax. * src/datatypes.c (virLibConnError): Likewise. * src/interface/netcf_driver.c (interfaceReportError): Likewise. * src/libvirt.c (virLibStreamError): Likewise. * src/lxc/lxc_conf.h (lxcError): Likewise. * src/network/bridge_driver.c (networkReportError): Likewise. * src/nodeinfo.c (nodeReportError): Likewise. * src/opennebula/one_conf.h (oneError): Likewise. * src/openvz/openvz_conf.h (openvzError): Likewise. * src/phyp/phyp_driver.c (PHYP_ERROR): Likewise. * src/qemu/qemu_conf.h (qemuReportError): Likewise. * src/remote/remote_driver.c (errorf): Likewise. * src/security/security_driver.h (virSecurityReportError): Likewise. * src/test/test_driver.c (testError): Likewise. * src/uml/uml_conf.h (umlReportError): Likewise. * src/vbox/vbox_driver.c (vboxError): Likewise. * src/vbox/vbox_tmpl.c (vboxError): Likewise.
2010-03-01 23:38:28 +00:00
* Copyright (C) 2008, 2010 Red Hat, Inc.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* Authors:
* James Morris <jmorris@namei.org>
*
*/
#ifndef __VIR_SECURITY_H__
# define __VIR_SECURITY_H__
# include "internal.h"
# include "domain_conf.h"
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
# include "security_manager.h"
/*
* Return values for security driver probing: the driver will determine
* whether it should be enabled or disabled.
*/
typedef enum {
SECURITY_DRIVER_ENABLE = 0,
SECURITY_DRIVER_ERROR = -1,
SECURITY_DRIVER_DISABLE = -2,
} virSecurityDriverStatus;
typedef struct _virSecurityDriver virSecurityDriver;
typedef virSecurityDriver *virSecurityDriverPtr;
typedef virSecurityDriverStatus (*virSecurityDriverProbe) (void);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDriverOpen) (virSecurityManagerPtr mgr);
typedef int (*virSecurityDriverClose) (virSecurityManagerPtr mgr);
typedef const char *(*virSecurityDriverGetModel) (virSecurityManagerPtr mgr);
typedef const char *(*virSecurityDriverGetDOI) (virSecurityManagerPtr mgr);
typedef int (*virSecurityDomainRestoreImageLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
virDomainDiskDefPtr disk);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainSetSocketLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainClearSocketLabel)(virSecurityManagerPtr mgr,
virDomainObjPtr vm);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainSetImageLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
virDomainDiskDefPtr disk);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainRestoreHostdevLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
virDomainHostdevDefPtr dev);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainSetHostdevLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
virDomainHostdevDefPtr dev);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainSetSavedStateLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
const char *savefile);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainRestoreSavedStateLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
const char *savefile);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainGenLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr sec);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainReserveLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr sec);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainReleaseLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr sec);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainSetAllLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr sec,
const char *stdin_path);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainRestoreAllLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
int migrated);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainGetProcessLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
Refactor setup & cleanup of security labels in security driver The current security driver architecture has the following split of logic * domainGenSecurityLabel Allocate the unique label for the domain about to be started * domainGetSecurityLabel Retrieve the current live security label for a process * domainSetSecurityLabel Apply the previously allocated label to the current process Setup all disk image / device labelling * domainRestoreSecurityLabel Restore the original disk image / device labelling. Release the unique label for the domain The 'domainSetSecurityLabel' method is special because it runs in the context of the child process between the fork + exec. This is require in order to set the process label. It is not required in order to label disks/devices though. Having the disk labelling code run in the child process limits what it can do. In particularly libvirtd would like to remember the current disk image label, and only change shared image labels for the first VM to start. This requires use & update of global state in the libvirtd daemon, and thus cannot run in the child process context. The solution is to split domainSetSecurityLabel into two parts, one applies process label, and the other handles disk image labelling. At the same time domainRestoreSecurityLabel is similarly split, just so that it matches the style. Thus the previous 4 methods are replaced by the following 6 new methods * domainGenSecurityLabel Allocate the unique label for the domain about to be started No actual change here. * domainReleaseSecurityLabel Release the unique label for the domain * domainGetSecurityProcessLabel Retrieve the current live security label for a process Merely renamed for clarity. * domainSetSecurityProcessLabel Apply the previously allocated label to the current process * domainRestoreSecurityAllLabel Restore the original disk image / device labelling. * domainSetSecurityAllLabel Setup all disk image / device labelling The SELinux and AppArmour drivers are then updated to comply with this new spec. Notice that the AppArmour driver was actually a little different. It was creating its profile for the disk image and device labels in the 'domainGenSecurityLabel' method, where as the SELinux driver did it in 'domainSetSecurityLabel'. With the new method split, we can have consistency, with both drivers doing that in the domainSetSecurityAllLabel method. NB, the AppArmour changes here haven't been compiled so may not build.
2010-01-11 11:04:40 +00:00
virSecurityLabelPtr sec);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainSetProcessLabel) (virSecurityManagerPtr mgr,
Refactor setup & cleanup of security labels in security driver The current security driver architecture has the following split of logic * domainGenSecurityLabel Allocate the unique label for the domain about to be started * domainGetSecurityLabel Retrieve the current live security label for a process * domainSetSecurityLabel Apply the previously allocated label to the current process Setup all disk image / device labelling * domainRestoreSecurityLabel Restore the original disk image / device labelling. Release the unique label for the domain The 'domainSetSecurityLabel' method is special because it runs in the context of the child process between the fork + exec. This is require in order to set the process label. It is not required in order to label disks/devices though. Having the disk labelling code run in the child process limits what it can do. In particularly libvirtd would like to remember the current disk image label, and only change shared image labels for the first VM to start. This requires use & update of global state in the libvirtd daemon, and thus cannot run in the child process context. The solution is to split domainSetSecurityLabel into two parts, one applies process label, and the other handles disk image labelling. At the same time domainRestoreSecurityLabel is similarly split, just so that it matches the style. Thus the previous 4 methods are replaced by the following 6 new methods * domainGenSecurityLabel Allocate the unique label for the domain about to be started No actual change here. * domainReleaseSecurityLabel Release the unique label for the domain * domainGetSecurityProcessLabel Retrieve the current live security label for a process Merely renamed for clarity. * domainSetSecurityProcessLabel Apply the previously allocated label to the current process * domainRestoreSecurityAllLabel Restore the original disk image / device labelling. * domainSetSecurityAllLabel Setup all disk image / device labelling The SELinux and AppArmour drivers are then updated to comply with this new spec. Notice that the AppArmour driver was actually a little different. It was creating its profile for the disk image and device labels in the 'domainGenSecurityLabel' method, where as the SELinux driver did it in 'domainSetSecurityLabel'. With the new method split, we can have consistency, with both drivers doing that in the domainSetSecurityAllLabel method. NB, the AppArmour changes here haven't been compiled so may not build.
2010-01-11 11:04:40 +00:00
virDomainObjPtr vm);
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
typedef int (*virSecurityDomainSecurityVerify) (virSecurityManagerPtr mgr,
virDomainDefPtr def);
typedef int (*virSecurityDomainSetFDLabel) (virSecurityManagerPtr mgr,
virDomainObjPtr vm,
int fd);
struct _virSecurityDriver {
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
size_t privateDataLen;
const char *name;
virSecurityDriverProbe probe;
virSecurityDriverOpen open;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
virSecurityDriverClose close;
virSecurityDriverGetModel getModel;
virSecurityDriverGetDOI getDOI;
virSecurityDomainSecurityVerify domainSecurityVerify;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
virSecurityDomainSetImageLabel domainSetSecurityImageLabel;
virSecurityDomainRestoreImageLabel domainRestoreSecurityImageLabel;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
virSecurityDomainSetSocketLabel domainSetSecuritySocketLabel;
virSecurityDomainClearSocketLabel domainClearSecuritySocketLabel;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
virSecurityDomainGenLabel domainGenSecurityLabel;
virSecurityDomainReserveLabel domainReserveSecurityLabel;
Refactor setup & cleanup of security labels in security driver The current security driver architecture has the following split of logic * domainGenSecurityLabel Allocate the unique label for the domain about to be started * domainGetSecurityLabel Retrieve the current live security label for a process * domainSetSecurityLabel Apply the previously allocated label to the current process Setup all disk image / device labelling * domainRestoreSecurityLabel Restore the original disk image / device labelling. Release the unique label for the domain The 'domainSetSecurityLabel' method is special because it runs in the context of the child process between the fork + exec. This is require in order to set the process label. It is not required in order to label disks/devices though. Having the disk labelling code run in the child process limits what it can do. In particularly libvirtd would like to remember the current disk image label, and only change shared image labels for the first VM to start. This requires use & update of global state in the libvirtd daemon, and thus cannot run in the child process context. The solution is to split domainSetSecurityLabel into two parts, one applies process label, and the other handles disk image labelling. At the same time domainRestoreSecurityLabel is similarly split, just so that it matches the style. Thus the previous 4 methods are replaced by the following 6 new methods * domainGenSecurityLabel Allocate the unique label for the domain about to be started No actual change here. * domainReleaseSecurityLabel Release the unique label for the domain * domainGetSecurityProcessLabel Retrieve the current live security label for a process Merely renamed for clarity. * domainSetSecurityProcessLabel Apply the previously allocated label to the current process * domainRestoreSecurityAllLabel Restore the original disk image / device labelling. * domainSetSecurityAllLabel Setup all disk image / device labelling The SELinux and AppArmour drivers are then updated to comply with this new spec. Notice that the AppArmour driver was actually a little different. It was creating its profile for the disk image and device labels in the 'domainGenSecurityLabel' method, where as the SELinux driver did it in 'domainSetSecurityLabel'. With the new method split, we can have consistency, with both drivers doing that in the domainSetSecurityAllLabel method. NB, the AppArmour changes here haven't been compiled so may not build.
2010-01-11 11:04:40 +00:00
virSecurityDomainReleaseLabel domainReleaseSecurityLabel;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
Refactor setup & cleanup of security labels in security driver The current security driver architecture has the following split of logic * domainGenSecurityLabel Allocate the unique label for the domain about to be started * domainGetSecurityLabel Retrieve the current live security label for a process * domainSetSecurityLabel Apply the previously allocated label to the current process Setup all disk image / device labelling * domainRestoreSecurityLabel Restore the original disk image / device labelling. Release the unique label for the domain The 'domainSetSecurityLabel' method is special because it runs in the context of the child process between the fork + exec. This is require in order to set the process label. It is not required in order to label disks/devices though. Having the disk labelling code run in the child process limits what it can do. In particularly libvirtd would like to remember the current disk image label, and only change shared image labels for the first VM to start. This requires use & update of global state in the libvirtd daemon, and thus cannot run in the child process context. The solution is to split domainSetSecurityLabel into two parts, one applies process label, and the other handles disk image labelling. At the same time domainRestoreSecurityLabel is similarly split, just so that it matches the style. Thus the previous 4 methods are replaced by the following 6 new methods * domainGenSecurityLabel Allocate the unique label for the domain about to be started No actual change here. * domainReleaseSecurityLabel Release the unique label for the domain * domainGetSecurityProcessLabel Retrieve the current live security label for a process Merely renamed for clarity. * domainSetSecurityProcessLabel Apply the previously allocated label to the current process * domainRestoreSecurityAllLabel Restore the original disk image / device labelling. * domainSetSecurityAllLabel Setup all disk image / device labelling The SELinux and AppArmour drivers are then updated to comply with this new spec. Notice that the AppArmour driver was actually a little different. It was creating its profile for the disk image and device labels in the 'domainGenSecurityLabel' method, where as the SELinux driver did it in 'domainSetSecurityLabel'. With the new method split, we can have consistency, with both drivers doing that in the domainSetSecurityAllLabel method. NB, the AppArmour changes here haven't been compiled so may not build.
2010-01-11 11:04:40 +00:00
virSecurityDomainGetProcessLabel domainGetSecurityProcessLabel;
virSecurityDomainSetProcessLabel domainSetSecurityProcessLabel;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
Refactor setup & cleanup of security labels in security driver The current security driver architecture has the following split of logic * domainGenSecurityLabel Allocate the unique label for the domain about to be started * domainGetSecurityLabel Retrieve the current live security label for a process * domainSetSecurityLabel Apply the previously allocated label to the current process Setup all disk image / device labelling * domainRestoreSecurityLabel Restore the original disk image / device labelling. Release the unique label for the domain The 'domainSetSecurityLabel' method is special because it runs in the context of the child process between the fork + exec. This is require in order to set the process label. It is not required in order to label disks/devices though. Having the disk labelling code run in the child process limits what it can do. In particularly libvirtd would like to remember the current disk image label, and only change shared image labels for the first VM to start. This requires use & update of global state in the libvirtd daemon, and thus cannot run in the child process context. The solution is to split domainSetSecurityLabel into two parts, one applies process label, and the other handles disk image labelling. At the same time domainRestoreSecurityLabel is similarly split, just so that it matches the style. Thus the previous 4 methods are replaced by the following 6 new methods * domainGenSecurityLabel Allocate the unique label for the domain about to be started No actual change here. * domainReleaseSecurityLabel Release the unique label for the domain * domainGetSecurityProcessLabel Retrieve the current live security label for a process Merely renamed for clarity. * domainSetSecurityProcessLabel Apply the previously allocated label to the current process * domainRestoreSecurityAllLabel Restore the original disk image / device labelling. * domainSetSecurityAllLabel Setup all disk image / device labelling The SELinux and AppArmour drivers are then updated to comply with this new spec. Notice that the AppArmour driver was actually a little different. It was creating its profile for the disk image and device labels in the 'domainGenSecurityLabel' method, where as the SELinux driver did it in 'domainSetSecurityLabel'. With the new method split, we can have consistency, with both drivers doing that in the domainSetSecurityAllLabel method. NB, the AppArmour changes here haven't been compiled so may not build.
2010-01-11 11:04:40 +00:00
virSecurityDomainSetAllLabel domainSetSecurityAllLabel;
virSecurityDomainRestoreAllLabel domainRestoreSecurityAllLabel;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
virSecurityDomainSetHostdevLabel domainSetSecurityHostdevLabel;
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
virSecurityDomainRestoreHostdevLabel domainRestoreSecurityHostdevLabel;
virSecurityDomainSetSavedStateLabel domainSetSavedStateLabel;
virSecurityDomainRestoreSavedStateLabel domainRestoreSavedStateLabel;
virSecurityDomainSetFDLabel domainSetSecurityFDLabel;
};
Refactor the security drivers to simplify usage The current security driver usage requires horrible code like if (driver->securityDriver && driver->securityDriver->domainSetSecurityHostdevLabel && driver->securityDriver->domainSetSecurityHostdevLabel(driver->securityDriver, vm, hostdev) < 0) This pair of checks for NULL clutters up the code, making the driver calls 2 lines longer than they really need to be. The goal of the patchset is to change the calling convention to simply if (virSecurityManagerSetHostdevLabel(driver->securityDriver, vm, hostdev) < 0) The first check for 'driver->securityDriver' being NULL is removed by introducing a 'no op' security driver that will always be present if no real driver is enabled. This guarentees driver->securityDriver != NULL. The second check for 'driver->securityDriver->domainSetSecurityHostdevLabel' being non-NULL is hidden in a new abstraction called virSecurityManager. This separates the driver callbacks, from main internal API. The addition of a virSecurityManager object, that is separate from the virSecurityDriver struct also allows for security drivers to carry state / configuration information directly. Thus the DAC/Stack drivers from src/qemu which used to pull config from 'struct qemud_driver' can now be moved into the 'src/security' directory and store their config directly. * src/qemu/qemu_conf.h, src/qemu/qemu_driver.c: Update to use new virSecurityManager APIs * src/qemu/qemu_security_dac.c, src/qemu/qemu_security_dac.h src/qemu/qemu_security_stacked.c, src/qemu/qemu_security_stacked.h: Move into src/security directory * src/security/security_stack.c, src/security/security_stack.h, src/security/security_dac.c, src/security/security_dac.h: Generic versions of previous QEMU specific drivers * src/security/security_apparmor.c, src/security/security_apparmor.h, src/security/security_driver.c, src/security/security_driver.h, src/security/security_selinux.c, src/security/security_selinux.h: Update to take virSecurityManagerPtr object as the first param in all callbacks * src/security/security_nop.c, src/security/security_nop.h: Stub implementation of all security driver APIs. * src/security/security_manager.h, src/security/security_manager.c: New internal API for invoking security drivers * src/libvirt.c: Add missing debug for security APIs
2010-11-17 20:26:30 +00:00
virSecurityDriverPtr virSecurityDriverLookup(const char *name);
#endif /* __VIR_SECURITY_H__ */