libvirt/tests/qemuxml2argvdata/q35-virtio-pci.args

65 lines
2.8 KiB
Plaintext
Raw Normal View History

qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-x86_64 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-name q35-test \
-S \
-machine q35,accel=tcg,usb=off,dump-guest-core=off \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-m 2048 \
-smp 2,sockets=2,cores=1,threads=1 \
-uuid 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 \
-display none \
-no-user-config \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-nodefaults \
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-q35-test/monitor.sock,\
server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-no-acpi \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x0 \
-device ioh3420,port=0x10,chassis=3,id=pci.3,bus=pcie.0,multifunction=on,\
addr=0x2 \
-device ioh3420,port=0x11,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x1 \
-device ioh3420,port=0x12,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x2 \
-device ioh3420,port=0x13,chassis=6,id=pci.6,bus=pcie.0,addr=0x2.0x3 \
-device ioh3420,port=0x14,chassis=7,id=pci.7,bus=pcie.0,addr=0x2.0x4 \
-device ioh3420,port=0x15,chassis=8,id=pci.8,bus=pcie.0,addr=0x2.0x5 \
-device ioh3420,port=0x16,chassis=9,id=pci.9,bus=pcie.0,addr=0x2.0x6 \
-device ioh3420,port=0x17,chassis=10,id=pci.10,bus=pcie.0,addr=0x2.0x7 \
-device ioh3420,port=0x18,chassis=11,id=pci.11,bus=pcie.0,multifunction=on,\
addr=0x3 \
-device ioh3420,port=0x19,chassis=12,id=pci.12,bus=pcie.0,addr=0x3.0x1 \
-device ioh3420,port=0x1a,chassis=13,id=pci.13,bus=pcie.0,addr=0x3.0x2 \
-device ioh3420,port=0x1b,chassis=14,id=pci.14,bus=pcie.0,addr=0x3.0x3 \
-device ioh3420,port=0x1c,chassis=15,id=pci.15,bus=pcie.0,addr=0x3.0x4 \
-device nec-usb-xhci,id=usb,bus=pci.4,addr=0x0 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-device virtio-scsi-pci,id=scsi0,bus=pci.2,addr=0x4 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.2,addr=0x3 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk1 \
-device virtio-blk-pci,bus=pci.2,addr=0x5,drive=drive-virtio-disk1,\
id=virtio-disk1,bootindex=1 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-fsdev local,security_model=passthrough,id=fsdev-fs0,path=/export/to/guest \
-device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=/import/from/host,\
bus=pci.2,addr=0x1 \
-netdev user,id=hostnet0 \
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.2,\
addr=0x2 \
-netdev user,id=hostnet1 \
-device e1000e,netdev=hostnet1,id=net1,mac=00:11:22:33:44:66,bus=pci.3,\
addr=0x0 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-device virtio-input-host-pci,id=input0,evdev=/dev/input/event1234,bus=pci.2,\
addr=0x8 \
-device virtio-mouse-pci,id=input1,bus=pci.2,addr=0x9 \
-device virtio-keyboard-pci,id=input2,bus=pci.2,addr=0xa \
-device virtio-tablet-pci,id=input3,bus=pci.2,addr=0xb \
-device virtio-gpu-pci,id=video0,bus=pcie.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.2,addr=0x6 \
-object rng-random,id=objrng0,filename=/dev/urandom \
-device virtio-rng-pci,rng=objrng0,id=rng0,max-bytes=123,period=1234,bus=pci.2,\
addr=0x7