External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-26 23:55:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
05b3846caf
libvirt/tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-qxl-vga.args

28 lines
847 B
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=spice \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-i686 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-S \
-M pc \
-m 214 \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 1,sockets=1,cores=1,threads=1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-nodefaults \
qemu: Shorten per-domain directory names Per-domain directories were introduced in order to be able to completely separate security labels for each domain (commit f1f68ca33433825ce0deed2d96f1990200bc6618). However when the domain name is long (let's say a ridiculous 110 characters), we cannot connect to the monitor socket because on length of UNIX socket address is limited. In order to get around this, let's shorten it in similar fashion and in order to avoid conflicts, throw in an ID there as well. Also save that into the status XML and load the old status XMLs properly (to clean up after older domains). That way we can change it in the future. The shortening can be seen in qemuxml2argv tests, for example in the hugepages-pages2 case. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-26 08:15:55 +00:00
-monitor unix:/tmp/lib/domain--1-QEMUGuest1/monitor.sock,server,nowait \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-no-acpi \
-boot c \
-usb \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-ide0-0-0 \
qemu: assume -drive argument is always available As of QEMU 0.9.1 the -drive argument can be used to configure all disks, so the QEMU driver can assume it is always available and drop support for -hda/-cdrom/etc. Many of the tests need updating because a great many were running without CAPS_DRIVE set, so using the -hda legacy syntax. Fixing the tests uncovered a bug in the argv -> xml convertor which failed to handle disk with if=floppy. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:28:57 +00:00
-device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-spice port=5903,tls-port=5904,addr=127.0.0.1,x509-dir=/etc/pki/libvirt-spice,\
tls-channel=main,plaintext-channel=inputs \
-vga qxl \
-global qxl-vga.ram_size=67108864 \
-global qxl-vga.vram_size=33554432 \
qemu: Support ram bar size for qxl devices Adds a "ram" attribute globally to the video.model element, that changes the resulting qemu command line only if video.type == "qxl". <video> <model type='qxl' ram='65536' vram='65536' heads='1'/> </video> That attribute gets a default value of 64*1024. The schema is unchanged for other video element types. The resulting qemu command line change is the addition of -global qxl-vga.ram_size=<ram>*1024 or -global qxl.ram_size=<ram>*1024 For the main and secondary qxl devices respectively. The default for the qxl ram bar is 64*1024 kilobytes (the same as the default qxl vram bar size).
2013-01-18 18:36:36 +00:00
-device qxl,id=video1,ram_size=67108864,vram_size=67108864,bus=pci.0,addr=0x4 \
qemu: Support vram for video of qxl type For qemu names the primary vga as "qxl-vga": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE,... 2) if vram is not specified for 2nd qxl device, (use the default set by global): -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... For qemu names all qxl devices as "qxl": 1) if vram is specified for 2nd qxl device: -vga qxl -global qxl.vram_size=$SIZE \ -device qxl,id=video1,vram_size=$SIZE ... 2) if vram is not specified for 2nd qxl device: -vga qxl -global qxl-vga.vram_size=$SIZE \ -device qxl,id=video1,... "-global" is the only way to define vram_size for the primary qxl device, regardless of how qemu names it, (It's not good a good way, as original idea of "-global" is to set a global default for a driver property, but to specify vram for first qxl device, we have to use it). For other qxl devices, as they are represented by "-device", could specify it directly and seperately for each, and it overrides the default set by "-global" if specified. v1 - v2: * modify "virDomainVideoDefaultRAM" so that it returns 16M as the default vram_size for qxl device. * vram_size * 1024 (qemu accepts bytes for vram_size). * apply default vram_size for qxl device for which vram_size is not specified. * modify "graphics-spice" tests (more sensiable vram_size) * Add an argument of virDomainDefPtr type for qemuBuildVideoDevStr, to use virDomainVideoDefaultRAM in qemuBuildVideoDevStr). v2 - v3: * Modify default video memory size for qxl device from 16M to 24M * Update codes to be consistent with changes on qemu_capabilities.*
2011-03-06 14:00:27 +00:00
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Reference in New Issue Copy Permalink