External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-26 23:55:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
05b3846caf
libvirt/tests/qemuxml2argvdata/qemuxml2argv-q35-pcie.args

61 lines
2.6 KiB
Plaintext
Raw Normal View History

qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-x86_64 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-name q35-test \
-S \
-M q35 \
-m 2048 \
-smp 2,sockets=2,cores=1,threads=1 \
-uuid 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 \
-nographic \
-nodefaults \
-monitor unix:/tmp/lib/domain--1-q35-test/monitor.sock,server,nowait \
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
-device pci-bridge,chassis_nr=2,id=pci.2,bus=pci.1,addr=0x0 \
conf: aggregate multiple pcie-root-ports onto a single slot Set the VIR_PCI_CONNECT_AGGREGATE_SLOT flag for pcie-root-ports so that they will be assigned to all the functions on a slot. Some qemu test case outputs had to be adjusted due to the pcie-root-ports now being put on multiple functions.
2016-10-20 19:46:01 +00:00
-device ioh3420,port=0x10,chassis=3,id=pci.3,bus=pcie.0,multifunction=on,\
addr=0x2 \
-device ioh3420,port=0x11,chassis=4,id=pci.4,bus=pcie.0,addr=0x2.0x1 \
-device ioh3420,port=0x12,chassis=5,id=pci.5,bus=pcie.0,addr=0x2.0x2 \
-device ioh3420,port=0x13,chassis=6,id=pci.6,bus=pcie.0,addr=0x2.0x3 \
-device ioh3420,port=0x14,chassis=7,id=pci.7,bus=pcie.0,addr=0x2.0x4 \
-device ioh3420,port=0x15,chassis=8,id=pci.8,bus=pcie.0,addr=0x2.0x5 \
-device ioh3420,port=0x16,chassis=9,id=pci.9,bus=pcie.0,addr=0x2.0x6 \
-device ioh3420,port=0x17,chassis=10,id=pci.10,bus=pcie.0,addr=0x2.0x7 \
-device ioh3420,port=0x18,chassis=11,id=pci.11,bus=pcie.0,multifunction=on,\
addr=0x3 \
-device ioh3420,port=0x19,chassis=12,id=pci.12,bus=pcie.0,addr=0x3.0x1 \
-device ioh3420,port=0x1a,chassis=13,id=pci.13,bus=pcie.0,addr=0x3.0x2 \
-device ioh3420,port=0x1b,chassis=14,id=pci.14,bus=pcie.0,addr=0x3.0x3 \
-device ioh3420,port=0x1c,chassis=15,id=pci.15,bus=pcie.0,addr=0x3.0x4 \
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
-device nec-usb-xhci,id=usb,bus=pci.8,addr=0x0 \
qemu: assign e1000e network devices to PCIe slots when appropriate The e1000e is an emulated network device based on the Intel 82574, present in qemu 2.7.0 and later. Among other differences from the e1000, it presents itself as a PCIe device rather than legacy PCI. In order to get it assigned to a PCIe controller, this patch updates the flags setting for network devices when the model name is "e1000e". (Note that for some reason libvirt has never validated the network device model names other than to check that there are no dangerous characters in them. That should probably change, but is the subject of another patch.) Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
2016-08-08 09:23:57 +00:00
-device virtio-scsi-pci,id=scsi0,bus=pci.7,addr=0x0 \
-device virtio-serial-pci,id=virtio-serial0,bus=pci.6,addr=0x0 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-virtio-disk1 \
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
-device virtio-blk-pci,bus=pci.9,addr=0x0,drive=drive-virtio-disk1,\
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
id=virtio-disk1 \
-fsdev local,security_model=passthrough,id=fsdev-fs0,path=/export/to/guest \
-device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=/import/from/host,\
bus=pci.3,addr=0x0 \
-netdev user,id=hostnet0 \
-device virtio-net-pci,netdev=hostnet0,id=net0,mac=00:11:22:33:44:55,bus=pci.4,\
addr=0x0 \
qemu: assign e1000e network devices to PCIe slots when appropriate The e1000e is an emulated network device based on the Intel 82574, present in qemu 2.7.0 and later. Among other differences from the e1000, it presents itself as a PCIe device rather than legacy PCI. In order to get it assigned to a PCIe controller, this patch updates the flags setting for network devices when the model name is "e1000e". (Note that for some reason libvirt has never validated the network device model names other than to check that there are no dangerous characters in them. That should probably change, but is the subject of another patch.) Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
2016-08-08 09:23:57 +00:00
-netdev user,id=hostnet1 \
-device e1000e,netdev=hostnet1,id=net1,mac=00:11:22:33:44:66,bus=pci.5,\
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
addr=0x0 \
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
-device virtio-input-host-pci,id=input0,evdev=/dev/input/event1234,bus=pci.12,\
qemu: assign e1000e network devices to PCIe slots when appropriate The e1000e is an emulated network device based on the Intel 82574, present in qemu 2.7.0 and later. Among other differences from the e1000, it presents itself as a PCIe device rather than legacy PCI. In order to get it assigned to a PCIe controller, this patch updates the flags setting for network devices when the model name is "e1000e". (Note that for some reason libvirt has never validated the network device model names other than to check that there are no dangerous characters in them. That should probably change, but is the subject of another patch.) Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
2016-08-08 09:23:57 +00:00
addr=0x0 \
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
-device virtio-mouse-pci,id=input1,bus=pci.13,addr=0x0 \
-device virtio-keyboard-pci,id=input2,bus=pci.14,addr=0x0 \
-device virtio-tablet-pci,id=input3,bus=pci.15,addr=0x0 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-device virtio-gpu-pci,id=video0,bus=pcie.0,addr=0x1 \
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
-device virtio-balloon-pci,id=balloon0,bus=pci.10,addr=0x0 \
qemu: assign virtio devices to PCIe slot when appropriate libvirt previously assigned nearly all devices to a "hotpluggable" legacy PCI slot even on machines with a PCIe root bus (and even though most such machines don't even support hotplug on legacy PCI slots!) Forcing all devices onto legacy PCI slots means that the domain will need a dmi-to-pci-bridge (to convert from PCIe to legacy PCI) and a pci-bridge (to provide hotpluggable legacy PCI slots which, again, usually aren't hotpluggable anyway). To help reduce the need for these legacy controllers, this patch tries to assign virtio-1.0-capable devices to PCIe slots whenever possible, by setting appropriate connectFlags in virDomainCalculateDevicePCIConnectFlags(). Happily, when that function was written (just a few commits ago) it was created with a "virtioFlags" argument, set by both of its callers, which is the proper connectFlags to set for any virtio-*-pci device - depending on the arch/machinetype of the domain, and whether or not the qemu binary supports virtio-1.0, that flag will have either been set to PCI or PCIe. This patch merely enables the functionality by setting the flags for the device to whatever is in virtioFlags if the device is a virtio-*-pci device. NB: the first virtio video device will be placed directly on bus 0 slot 1 rather than on a pcie-root-port due to the override for primary video devices in qemuDomainValidateDevicePCISlotsQ35(). Whether or not to change that is a topic of discussion, but this patch doesn't change that particular behavior. NB2: since the slot must be hotpluggable, and pcie-root (the PCIe root complex) does *not* support hotplug, this means that suitable controllers must also be in the config (i.e. either pcie-root-port, or pcie-downstream-port). For now, libvirt doesn't add those automatically, so if you put virtio devices in a config for a qemu that has PCIe-capable virtio devices, you'll need to add extra pcie-root-ports yourself. That requirement will be eliminated in a future patch, but for now, it's simple to do this: <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> <controller type='pci' model='pcie-root-port'/> ... Partially Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1330024
2016-08-13 22:10:41 +00:00
-object rng-random,id=objrng0,filename=/dev/urandom \
qemu: assign e1000e network devices to PCIe slots when appropriate The e1000e is an emulated network device based on the Intel 82574, present in qemu 2.7.0 and later. Among other differences from the e1000, it presents itself as a PCIe device rather than legacy PCI. In order to get it assigned to a PCIe controller, this patch updates the flags setting for network devices when the model name is "e1000e". (Note that for some reason libvirt has never validated the network device model names other than to check that there are no dangerous characters in them. That should probably change, but is the subject of another patch.) Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1343094
2016-08-08 09:23:57 +00:00
-device virtio-rng-pci,rng=objrng0,id=rng0,max-bytes=123,period=1234,\
qemu: assign nec-xhci (USB3) controller to a PCIe address when appropriate The nec-usb-xhci device (which is a USB3 controller) has always presented itself as a PCI device when plugged into a legacy PCI slot, and a PCIe device when plugged into a PCIe slot, but libvirt has always auto-assigned it to a legacy PCI slot. This patch changes that behavior to auto-assign to a PCIe slot on systems that have pcie-root (e.g. Q35 and aarch64/virt). Since we don't yet auto-create pcie-*-port controllers on demand, this means a config with an nec-xhci USB controller that has no PCI address assigned will also need to have an otherwise-unused pcie-*-port controller specified: <controller type='pci' model='pcie-root-port'/> <controller type='usb' model='nec-xhci'/> (this assumes there is an otherwise-unused slot on pcie-root to accept the pcie-root-port)
2016-08-14 05:58:11 +00:00
bus=pci.11,addr=0x0
Reference in New Issue Copy Permalink