External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-26 23:55:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
05b3846caf
libvirt/tests/qemuxml2argvdata/qemuxml2argv-q35-usb2.args

30 lines
1013 B
Plaintext
Raw Normal View History

qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-x86_64 \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
-name q35-test \
-S \
-M q35 \
-m 2048 \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 2,sockets=2,cores=1,threads=1 \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
-uuid 11dbdcdd-4c3b-482b-8903-9bdb8c0a2774 \
-nographic \
-nodefaults \
qemu: Shorten per-domain directory names Per-domain directories were introduced in order to be able to completely separate security labels for each domain (commit f1f68ca33433825ce0deed2d96f1990200bc6618). However when the domain name is long (let's say a ridiculous 110 characters), we cannot connect to the monitor socket because on length of UNIX socket address is limited. In order to get around this, let's shorten it in similar fashion and in order to avoid conflicts, throw in an ID there as well. Also save that into the status XML and load the old status XMLs properly (to clean up after older domains). That way we can change it in the future. The shortening can be seen in qemuxml2argv tests, for example in the hugepages-pages2 case. Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-02-26 08:15:55 +00:00
-monitor unix:/tmp/lib/domain--1-q35-test/monitor.sock,server,nowait \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
-no-acpi \
-boot c \
-device i82801b11-bridge,id=pci.1,bus=pcie.0,addr=0x1e \
conf: allow use of slot 0 in a dmi-to-pci-bridge When support for dmi-to-pci-bridge was added, it was assumed that, just as with the pci-root bus, slot 0 was reserved. This is not the case - it can be used to connect a device just like any other slot, so remove the restriction and update the test cases that auto-assign an address on a dmi-to-pci-bridge.
2016-03-02 20:29:33 +00:00
-device pci-bridge,chassis_nr=56,id=pci.2,bus=pci.1,addr=0x0 \
qemu: prefer 00:1D.x and 00:1A.x for USB2 controllers on Q35 The real Q35 machine puts the first USB controller set (EHCI+(UHCIx4)) on bus 0 slot 0x1D, and the 2nd USB controller set on bus 0 slot 0x1A, so let's attempt to make the virtual machine match that for controllers with auto-assigned addresses when possible. Three test cases were added to assure that the proper addresses are assigned - one with a single set of unaddressed USB controllers, one with 3 (to grab both preferred slots plus one more), and one with the order of the controller definitions reordered, to assure that the auto-assignment isn't mixed up by order.
2015-10-21 19:08:49 +00:00
-device ich9-usb-ehci1,id=usb,bus=pcie.0,addr=0x1d.0x7 \
-device ich9-usb-uhci1,masterbus=usb.0,firstport=0,bus=pcie.0,multifunction=on,\
addr=0x1d \
-device ich9-usb-uhci2,masterbus=usb.0,firstport=2,bus=pcie.0,addr=0x1d.0x1 \
-device ich9-usb-uhci3,masterbus=usb.0,firstport=4,bus=pcie.0,addr=0x1d.0x2 \
-drive file=/dev/HostVG/QEMUGuest1,format=raw,if=none,id=drive-sata0-0-0 \
-device ide-drive,bus=ide.0,drive=drive-sata0-0-0,id=sata0-0-0 \
tests: fix some QXL capability combinations that don't make sense If one of QEMU_CAPS_DEVICE_QXL_VGA or QEMU_CAPS_DEVICE_QXL is set the other one will always be set as well because both devices are tied together in QEMU. The change of args files is caused by the presence of capability QEMU_CAPS_DEVICE_VIDEO_PRIMARY which means it's safe to use "-device qxl-vga" instead of "-vga qxl", see commit (e3f2686b) and by the fact that if QEMU_CAPS_VGA_QXL is set QEMU_CAPS_DEVICE_QXL_VGA and QEMU_CAPS_DEVICE_QXL would be set too (since we support only qemu with "-device" option). Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-09-21 16:26:21 +00:00
-device qxl-vga,id=video0,ram_size=67108864,vram_size=33554432,bus=pcie.0,\
addr=0x1
Reference in New Issue Copy Permalink