External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2025-01-05 12:35:20 +00:00
Code Issues Packages Projects Releases Wiki Activity
105794cd43
libvirt/tests/qemuxml2argvdata/qemuxml2argv-usb-piix3-controller.args

23 lines
499 B
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
HOME=/home/test \
USER=test \
LOGNAME=test \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name QEMUGuest1 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-S \
-M pc \
-m 214 \
-smp 1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid c7a5fdbd-edaf-9455-926a-d65c16db1809 \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-nographic \
-nodefconfig \
-nodefaults \
qemu: make PCI multifunction support more manual When support for was added for PCI multifunction cards (in commit 9f8baf, first included in libvirt 0.9.3), it was done by always turning on the multifunction bit for all PCI devices. Since that time it has been realized that this is not an ideal solution, and that the multifunction bit must be selectively turned on. For example, see https://bugzilla.redhat.com/show_bug.cgi?id=728174 and the discussion before and after https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html This patch modifies multifunction support so that the multifunction=on option is only added to the qemu commandline for a device if its PCI <address> definition has the attribute "multifunction='on'", e.g.: <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/> In practice, the multifunction bit should only be turned on if function='0' AND other functions will be used in the same slot - it usually isn't needed for functions 1-7 (although there are apparently some exceptions, e.g. the Intel X53 according to the QEMU source code), and should never be set if only function 0 will be used in the slot. The test cases have been changed accordingly to illustrate. With this patch in place, if a user attempts to assign multiple functions in a slot without setting the multifunction bit for function 0, libvirt will issue an error when the domain is defined, and the define operation will fail. In the future, we may decide to detect this situation and automatically add multifunction=on to avoid the error; even then it will still be useful to have a manual method of turning on multifunction since, as stated above, there are some devices that excpect it to be turned on for all functions in a slot. A side effect of this patch is that attempts to use the same PCI address for two different devices will now log an error (previously this would cause the domain define operation to fail, but there would be no log message generated). Because the function doing this log was almost completely rewritten, I didn't think it worthwhile to make a separate patch for that fix (the entire patch would immediately be obsoleted).
2011-09-29 17:00:32 +00:00
-chardev socket,id=charmonitor,path=/tmp/test-monitor,server,nowait \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-mon chardev=charmonitor,id=monitor,mode=readline \
-no-acpi \
-boot c \
qemu: make PCI multifunction support more manual When support for was added for PCI multifunction cards (in commit 9f8baf, first included in libvirt 0.9.3), it was done by always turning on the multifunction bit for all PCI devices. Since that time it has been realized that this is not an ideal solution, and that the multifunction bit must be selectively turned on. For example, see https://bugzilla.redhat.com/show_bug.cgi?id=728174 and the discussion before and after https://www.redhat.com/archives/libvir-list/2011-September/msg01036.html This patch modifies multifunction support so that the multifunction=on option is only added to the qemu commandline for a device if its PCI <address> definition has the attribute "multifunction='on'", e.g.: <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0' multifunction='on'/> In practice, the multifunction bit should only be turned on if function='0' AND other functions will be used in the same slot - it usually isn't needed for functions 1-7 (although there are apparently some exceptions, e.g. the Intel X53 according to the QEMU source code), and should never be set if only function 0 will be used in the slot. The test cases have been changed accordingly to illustrate. With this patch in place, if a user attempts to assign multiple functions in a slot without setting the multifunction bit for function 0, libvirt will issue an error when the domain is defined, and the define operation will fail. In the future, we may decide to detect this situation and automatically add multifunction=on to avoid the error; even then it will still be useful to have a manual method of turning on multifunction since, as stated above, there are some devices that excpect it to be turned on for all functions in a slot. A side effect of this patch is that attempts to use the same PCI address for two different devices will now log an error (previously this would cause the domain define operation to fail, but there would be no log message generated). Because the function doing this log was almost completely rewritten, I didn't think it worthwhile to make a separate patch for that fix (the entire patch would immediately be obsoleted).
2011-09-29 17:00:32 +00:00
-device piix3-usb-uhci,id=usb,bus=pci.0,addr=0x1.0x2 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Reference in New Issue Copy Permalink