libvirt/docs/formatnetwork.html.in

260 lines
12 KiB
HTML
Raw Normal View History

<html>
<body>
<h1>Network XML format</h1>
<ul id="toc">
</ul>
2008-04-29 14:08:08 +00:00
<p>
This page provides an introduction to the network XML format. For background
information on the concepts referred to here, consult the <a href="archnetwork.html">network driver architecture</a>
page.
</p>
<h2><a name="elements">Element and attribute overview</a></h2>
2008-04-29 14:08:08 +00:00
<p>
The root element required for all virtual networks is
named <code>network</code> and has no attributes.
The network XML format is available <span class="since">since 0.3.0</span>
2008-04-29 14:08:08 +00:00
</p>
<h3><a name="elementsMetadata">General metadata</a></h3>
2008-04-29 14:08:08 +00:00
<p>
The first elements provide basic metadata about the virtual
network.
</p>
<pre>
&lt;network&gt;
&lt;name&gt;default&lt;/name&gt;
&lt;uuid&gt;3e3fce45-4f53-4fa7-bb32-11f34168b82b&lt;/uuid&gt;
...</pre>
<dl>
<dt><code>name</code></dt>
<dd>The content of the <code>name</code> element provides
a short name for the virtual network. This name should
consist only of alpha-numeric characters and is required
to be unique within the scope of a single host. It is
used to form the filename for storing the persistent
configuration file. <span class="since">Since 0.3.0</span></dd>
2008-04-29 14:08:08 +00:00
<dt><code>uuid</code></dt>
<dd>The content of the <code>uuid</code> element provides
a globally unique identifier for the virtual network.
The format must be RFC 4122 compliant, eg <code>3e3fce45-4f53-4fa7-bb32-11f34168b82b</code>.
If omitted when defining/creating a new network, a random
UUID is generated. <span class="since">Since 0.3.0</span></dd>
2008-04-29 14:08:08 +00:00
</dl>
<h3><a name="elementsConnect">Connectivity</a></h3>
2008-04-29 14:08:08 +00:00
<p>
The next set of elements control how a virtual network is
provided connectivity to the physical LAN (if at all).
</p>
<pre>
...
&lt;bridge name="virbr0" stp="on" delay="5"/&gt;
&lt;domain name="example"/&gt;
&lt;forward mode="nat" dev="eth0"/&gt;
...</pre>
2008-04-29 14:08:08 +00:00
<dl>
<dt><code>bridge</code></dt>
<dd>The <code>name</code> attribute on the <code>bridge</code> element
defines the name of a bridge device which will be used to construct
the virtual network. The virtual machines will be connected to this
bridge device allowing them to talk to each other. The bridge device
may also be connected to the LAN. It is recommended that bridge
device names started with the prefix <code>vir</code>, but the name
<code>virbr0</code> is reserved for the "default" virtual network.
This element should always be provided when defining a new network.
Attribute <code>stp</code> specifies if Spanning Tree Protocol is
'on' or 'off' (default is 'on'). Attribute <code>delay</code> sets
the bridge's forward delay value in seconds (default is 0).
<span class="since">Since 0.3.0</span>
2008-04-29 14:08:08 +00:00
</dd>
<dt><code>domain</code></dt>
<dd>
The <code>name</code> attribute on the <code>domain</code> element
defines the DNS domain of the DHCP server. This element is optional.
<span class="since">Since 0.4.5</span>
</dd>
2008-04-29 14:08:08 +00:00
<dt><code>forward</code></dt>
<dd>Inclusion of the <code>forward</code> element indicates that
the virtual network is to be connected to the physical
LAN. the <code>mode</code> attribute determines the method of
forwarding; possible selections are 'nat' and 'route'. If mode
is not specified, NAT forwarding will be used for
connectivity. If a network has any IPv6 addresses defined,
even if <code>mode</code> is given as 'nat', the IPv6 traffic
will be forwarded using routing, since IPv6 has no concept of NAT.
Firewall rules will allow forwarding to any other network device whether
ethernet, wireless, dialup, or VPN. If the <code>dev</code> attribute
is set, the firewall rules will restrict forwarding to the named
device only. If the <code>mode</code> attribute is set to <code>route</code>
then the traffic will not have NAT applied. This presumes that the
local LAN router has suitable routing table entries to return traffic
to this host. <span class="since">Since 0.3.0; 'mode' attribute since
0.4.2</span></dd>
2008-04-29 14:08:08 +00:00
</dl>
<h3><a name="elementsAddress">Addressing</a></h3>
2008-04-29 14:08:08 +00:00
<p>
The final set of elements define the IPv4 address range available,
and optionally enable DHCP sevices.
</p>
<pre>
...
&lt;ip address="192.168.122.1" netmask="255.255.255.0"&gt;
&lt;dhcp&gt;
&lt;range start="192.168.122.100" end="192.168.122.254" /&gt;
&lt;host mac="00:16:3e:77:e2:ed" name="foo.example.com" ip="192.168.122.10" /&gt;
&lt;host mac="00:16:3e:3e:a9:1a" name="bar.example.com" ip="192.168.122.11" /&gt;
&lt;/dhcp&gt;
&lt;/ip&gt;
2008-04-29 14:08:08 +00:00
&lt;/network&gt;</pre>
<dl>
<dt><code>ip</code></dt>
<dd>The <code>address</code> attribute defines an IPv4 address in
dotted-decimal format, or an IPv6 address in standard
colon-separated hexadecimal format, that will be configured on
the bridge
device associated with the virtual network. To the guests this
address will be their default route. For IPv4 addresses, the <code>netmask</code>
attribute defines the significant bits of the network address,
again specified in dotted-decimal format. For IPv6 addresses,
and as an alternate method for IPv4 addresses, you can specify
the significant bits of the network address with the <code>prefix</code>
attribute, which is an integer (for example, <code>netmask='255.255.255.0'</code>
could also be given as <code>prefix='24'</code>. The <code>family</code>
attribute is used to specify the type of address - 'ipv4' or 'ipv6'; if no
<code>family</code> is given, 'ipv4' is assumed. A network can have more than
one of each family of address defined, but only a single address can have a
<code>dhcp</code> or <code>tftp</code> element. <span class="since">Since 0.3.0;
IPv6, multiple addresses on a single network, <code>family</code>, and
<code>prefix</code> since 0.8.7</span>
network: add 'bootp' and 'tftp' config Currently, libvirtd will start a dnsmasq process for the virtual network, but (aside from killing the dnsmasq process and replacing it), there's no way to define tftp boot options. This change introduces the appropriate tags to the dhcp configuration: <network> <name>default</name> <bridge name="virbr%d" /> <forward/> <ip address="192.168.122.1" netmask="255.255.255.0"> <tftp root="/var/lib/tftproot" /> <dhcp> <range start="192.168.122.2" end="192.168.122.254" /> <bootp file="pxeboot.img"/> </dhcp> </ip> </network> When the attributes are present, these are passed to the arguments to dnsmasq: dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^ from <tftp /> from <bootp /> At present, only local tftp servers are supported (ie, dnsmasq runs as the tftp server), but we could improve this in future by adding a server= attribute. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2009-09-21 Paolo Bonzini <pbonzini@redhat.com> Jeremy Kerr <jk@ozlabs.org> * docs/formatnetwork.html.in: Document new tags. * docs/formatnetwork.html: Regenerate. * docs/schemas/network.rng: Update. * src/network_conf.c (virNetworkDefFree): Free new fields. (virNetworkDHCPRangeDefParseXML): Parse <bootp>. (virNetworkIPParseXML): New, parsing <dhcp> and <tftp>. (virNetworkDefParseXML): Use virNetworkIPParseXML instead of virNetworkDHCPRangeDefParseXML. (virNetworkDefFormat): Pretty print new fields. * src/network_conf.h (struct _virNetworkDef): Add netboot fields. * src/network_driver.c (networkBuildDnsmasqArgv): Add TFTP and BOOTP arguments. * tests/Makefile.am (EXTRA_DIST): Add networkschemadata. * tests/networkschematest: Look in networkschemadata. * tests/networkschemadata/netboot-network.xml: New.
2009-09-21 20:50:25 +00:00
</dd><dt><code>tftp</code></dt><dd>Immediately within
the <code>ip</code> element there is an optional <code>tftp</code>
element. The presence of this element and of its attribute
<code>root</code> enables TFTP services. The attribute specifies
the path to the root directory served via TFTP. <code>tftp</code> is not
supported for IPv6 addresses, can only be specified on a single IPv4 address
per network.
<span class="since">Since 0.7.1</span>
network: add 'bootp' and 'tftp' config Currently, libvirtd will start a dnsmasq process for the virtual network, but (aside from killing the dnsmasq process and replacing it), there's no way to define tftp boot options. This change introduces the appropriate tags to the dhcp configuration: <network> <name>default</name> <bridge name="virbr%d" /> <forward/> <ip address="192.168.122.1" netmask="255.255.255.0"> <tftp root="/var/lib/tftproot" /> <dhcp> <range start="192.168.122.2" end="192.168.122.254" /> <bootp file="pxeboot.img"/> </dhcp> </ip> </network> When the attributes are present, these are passed to the arguments to dnsmasq: dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^ from <tftp /> from <bootp /> At present, only local tftp servers are supported (ie, dnsmasq runs as the tftp server), but we could improve this in future by adding a server= attribute. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2009-09-21 Paolo Bonzini <pbonzini@redhat.com> Jeremy Kerr <jk@ozlabs.org> * docs/formatnetwork.html.in: Document new tags. * docs/formatnetwork.html: Regenerate. * docs/schemas/network.rng: Update. * src/network_conf.c (virNetworkDefFree): Free new fields. (virNetworkDHCPRangeDefParseXML): Parse <bootp>. (virNetworkIPParseXML): New, parsing <dhcp> and <tftp>. (virNetworkDefParseXML): Use virNetworkIPParseXML instead of virNetworkDHCPRangeDefParseXML. (virNetworkDefFormat): Pretty print new fields. * src/network_conf.h (struct _virNetworkDef): Add netboot fields. * src/network_driver.c (networkBuildDnsmasqArgv): Add TFTP and BOOTP arguments. * tests/Makefile.am (EXTRA_DIST): Add networkschemadata. * tests/networkschematest: Look in networkschemadata. * tests/networkschemadata/netboot-network.xml: New.
2009-09-21 20:50:25 +00:00
</dd><dt><code>dhcp</code></dt><dd>Also within the <code>ip</code> element there is an
optional <code>dhcp</code> element. The presence of this element
enables DHCP services on the virtual network. It will further
contain one or more <code>range</code> elements. The
<code>dhcp</code> element is not supported for IPv6, and
is only supported on a single IP address per network for IPv4.
<span class="since">Since 0.3.0</span>
2008-04-29 14:08:08 +00:00
</dd>
<dt><code>range</code></dt>
<dd>The <code>start</code> and <code>end</code> attributes on the
<code>range</code> element specify the boundaries of a pool of
IPv4 addresses to be provided to DHCP clients. These two addresses
must lie within the scope of the network defined on the parent
<code>ip</code> element. <span class="since">Since 0.3.0</span>
2008-04-29 14:08:08 +00:00
</dd>
<dt><code>host</code></dt>
<dd>Within the <code>dhcp</code> element there may be zero or more
<code>host</code> elements; these specify hosts which will be given
names and predefined IP addresses by the built-in DHCP server. Any
such element must specify the MAC address of the host to be assigned
a given name (via the <code>mac</code> attribute), the IP to be
assigned to that host (via the <code>ip</code> attribute), and the
name to be given that host by the DHCP server (via the
<code>name</code> attribute). <span class="since">Since 0.4.5</span>
network: add 'bootp' and 'tftp' config Currently, libvirtd will start a dnsmasq process for the virtual network, but (aside from killing the dnsmasq process and replacing it), there's no way to define tftp boot options. This change introduces the appropriate tags to the dhcp configuration: <network> <name>default</name> <bridge name="virbr%d" /> <forward/> <ip address="192.168.122.1" netmask="255.255.255.0"> <tftp root="/var/lib/tftproot" /> <dhcp> <range start="192.168.122.2" end="192.168.122.254" /> <bootp file="pxeboot.img"/> </dhcp> </ip> </network> When the attributes are present, these are passed to the arguments to dnsmasq: dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^ from <tftp /> from <bootp /> At present, only local tftp servers are supported (ie, dnsmasq runs as the tftp server), but we could improve this in future by adding a server= attribute. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2009-09-21 Paolo Bonzini <pbonzini@redhat.com> Jeremy Kerr <jk@ozlabs.org> * docs/formatnetwork.html.in: Document new tags. * docs/formatnetwork.html: Regenerate. * docs/schemas/network.rng: Update. * src/network_conf.c (virNetworkDefFree): Free new fields. (virNetworkDHCPRangeDefParseXML): Parse <bootp>. (virNetworkIPParseXML): New, parsing <dhcp> and <tftp>. (virNetworkDefParseXML): Use virNetworkIPParseXML instead of virNetworkDHCPRangeDefParseXML. (virNetworkDefFormat): Pretty print new fields. * src/network_conf.h (struct _virNetworkDef): Add netboot fields. * src/network_driver.c (networkBuildDnsmasqArgv): Add TFTP and BOOTP arguments. * tests/Makefile.am (EXTRA_DIST): Add networkschemadata. * tests/networkschematest: Look in networkschemadata. * tests/networkschemadata/netboot-network.xml: New.
2009-09-21 20:50:25 +00:00
</dd><dt><code>bootp</code></dt><dd>The optional <code>bootp</code>
element specifies BOOTP options to be provided by the DHCP server.
Two attributes are supported: <code>file</code> is mandatory and
gives the file to be used for the boot image; <code>server</code> is
optional and gives the address of the TFTP server from which the boot
image will be fetched. <code>server</code> defaults to the same host
that runs the DHCP server, as is the case when the <code>tftp</code>
element is used. The BOOTP options currently have to be the same
for all address ranges and statically assigned addresses.<span
class="since">Since 0.7.1 (<code>server</code> since 0.7.3).</span>
</dd>
2008-04-29 14:08:08 +00:00
</dl>
<h2><a name="examples">Example configuration</a></h2>
<h3><a name="examplesNAT">NAT based network</a></h3>
2008-04-29 14:08:08 +00:00
<p>
This example is the so called "default" virtual network. It is
provided and enabled out-of-the-box for all libvirt installations.
This is a configuration that allows guest OS to get outbound
connectivity regardless of whether the host uses ethernet, wireless,
dialup, or VPN networking without requiring any specific admin
configuration. In the absence of host networking, it at least allows
guests to talk directly to each other.
</p>
<pre>
&lt;network&gt;
&lt;name&gt;default&lt;/name&gt;
&lt;bridge name="virbr0" /&gt;
&lt;forward mode="nat"/&gt;
&lt;ip address="192.168.122.1" netmask="255.255.255.0"&gt;
&lt;dhcp&gt;
&lt;range start="192.168.122.2" end="192.168.122.254" /&gt;
&lt;/dhcp&gt;
&lt;/ip&gt;
&lt;/network&gt;</pre>
<h3><a name="examplesRoute">Routed network config</a></h3>
2008-04-29 14:08:08 +00:00
<p>
This is a variant on the default network which routes traffic
from the virtual network to the LAN without applying any NAT.
It requires that the IP address range be pre-configured in the
routing tables of the router on the host network. This example
further specifies that guest traffic may only go out via the
<code>eth1</code> host network device.
</p>
<pre>
&lt;network&gt;
&lt;name&gt;local&lt;/name&gt;
&lt;bridge name="virbr1" /&gt;
&lt;forward mode="route" dev="eth1"/&gt;
&lt;ip address="192.168.122.1" netmask="255.255.255.0"&gt;
&lt;dhcp&gt;
&lt;range start="192.168.122.2" end="192.168.122.254" /&gt;
&lt;/dhcp&gt;
&lt;/ip&gt;
&lt;/network&gt;</pre>
<h3><a name="examplesPrivate">Isolated network config</a></h3>
2008-04-29 14:08:08 +00:00
<p>
This variant provides a completely isolated private network
for guests. The guests can talk to each other, and the host
OS, but cannot reach any other machines on the LAN, due to
the omission of the <code>forward</code> element in the XML
description.
</p>
<pre>
&lt;network&gt;
&lt;name&gt;private&lt;/name&gt;
&lt;bridge name="virbr2" /&gt;
&lt;ip address="192.168.152.1" netmask="255.255.255.0"&gt;
&lt;dhcp&gt;
&lt;range start="192.168.152.2" end="192.168.152.254" /&gt;
&lt;/dhcp&gt;
&lt;/ip&gt;
&lt;/network&gt;</pre>
</body>
</html>