External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-22 21:55:25 +00:00
Code Issues Packages Projects Releases Wiki Activity
18a0326c3c
libvirt/tests/qemuxml2argvdata/disk-discard.args

37 lines
1.2 KiB
Plaintext
Raw Normal View History

tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
LC_ALL=C \
PATH=/bin \
qemu: command: Override HOME variable for system QEMU By default, qemu user's home dir points to '/' which shouldn't be used at all. We therefore pass the HOME variable from the current variable iff not running as SUID, which means that for systemd we never set it. This patch makes sure, that for system QEMU this is always set to libDir/<driver>, session mode is left untouched. Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-06 12:29:01 +00:00
HOME=/tmp/lib/domain--1-test \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
USER=test \
LOGNAME=test \
qemu: command: Enforce setting XDG variables for system QEMU For session mode, only XDG_CACHE_HOME is set, because we want to remain integrating with services in user session, but for system mode, this would have become reading/writing to '/' which carries the obvious issue with permissions (also, '/' is the wrong location in 99.9% cases anyway). Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-08 11:15:07 +00:00
XDG_DATA_HOME=/tmp/lib/domain--1-test/.local/share \
XDG_CACHE_HOME=/tmp/lib/domain--1-test/.cache \
XDG_CONFIG_HOME=/tmp/lib/domain--1-test/.config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
QEMU_AUDIO_DRV=none \
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
/usr/bin/qemu-system-x86_64 \
qemu: assume -name is always available The -name arg was added in QEMU 0.9.1, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:41 +00:00
-name test \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-S \
qemu: deprecate QEMU_CAPS_MACHINE_USB_OPT Implied by QEMU >= 1.3.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-machine pc-0.13,accel=tcg,usb=off,dump-guest-core=off \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-m 1024 \
qemu: Always assume QEMU_CAPS_REALTIME_MLOCK The '-realtime mlock' cmd line argument was introduced in QEMU commit v1.5.0-rc0~190 which matches minimal QEMU version we require. Therefore, the capability will always be present. Apparently, nearly none of our xml2argv test cases had the capability hence slightly bigger change under qemuxml2argvdata/. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-12 08:03:36 +00:00
-realtime mlock=off \
qemu: caps: Always assume QEMU_CAPS_SMP_TOPOLOGY Support for SMP topology was added by qemu commit dc6b1c09849484fbbc50 prior to 0.12.0, our minimum supported qemu version. $ git describe --tags dc6b1c09849484fbbc50803307e4c7a3d81eab62 v0.11.0-rc0-449-gdc6b1c0 $ git describe --tags --contains dc6b1c09849484fbbc50803307e4c7a3d81eab v0.12.0-rc0~1477
2016-06-23 11:29:16 +00:00
-smp 1,sockets=1,cores=1,threads=1 \
qemu: assume -uuid is always available The -uuid arg was added in QEMU 0.10.0, so the QEMU driver can assume it is always available. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 14:29:52 +00:00
-uuid 92d7a226-cfae-425b-a6d3-00bbf9ec5c9e \
qemu: deprecate QEMU_CAPS_DISPLAY Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-display none \
qemu: deprecate QEMU_CAPS_NO_USER_CONFIG Implied by QEMU >= 1.2.0. Delete this one first, because QEMU_CAPS_NODEFCONFIG is only used when QEMU_CAPS_NO_USER_CONFIG is unsupported. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-user-config \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-nodefaults \
qemu: command: always use -chardev for monitor config AFAIK there aren't any cases where we will/should hit the old code path for our supported qemu versions, so drop the old code. Massive test suite churn follows Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
2017-06-26 14:40:39 +00:00
-chardev socket,id=charmonitor,path=/tmp/lib/domain--1-test/monitor.sock,\
server,nowait \
qemu: deprecate QEMU_CAPS_MONITOR_JSON We require QEMU >= 1.5.0, assume every QEMU supports it. Sadly that does not let us trivially drop qemuMonitor's priv->monJSON bool, because of qemuDomainQemuAttach. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-28 22:04:58 +00:00
-mon chardev=charmonitor,id=monitor,mode=control \
qemu: deprecate QEMU_CAPS_RTC Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-rtc base=utc \
qemu: deprecate QEMU_CAPS_NO_SHUTDOWN Implied by QEMU >= 1.2.0. Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
2018-03-29 10:51:55 +00:00
-no-shutdown \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-no-acpi \
qemu: capabilities: Always assume QEMU_CAPS_BOOTINDEX The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported qemu versions now use it. There's a LOT of test fallout as we did not use capabilities close enough to upstream for many of our tests. Several tests had a 'bootindex' variant. Since they'd become redundant they are also removed here. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-09 11:26:17 +00:00
-boot menu=on \
tests: redo test argv file line wrapping Back in commit bd6c46fa0cfe275c24debc1152cfc5206c04b59b Author: Juerg Haefliger <juerg.haefliger@hp.com> Date: Mon Jan 31 06:42:57 2011 -0500 tests: handle backspace-newline pairs in test input files all the test argv files were line wrapped so that the args were less than 80 characters. The way the line wrapping was done turns out to be quite undesirable, because it often leaves multiple parameters on the same line. If we later need to add or remove individual parameters, then it leaves us having to redo line wrapping. This commit changes the line wrapping so that every single "-param value" is one its own new line. If the "value" is still too long, then we break on ',' or ':' or ' ' as needed. This means that when we come to add / remove parameters from the test files line, the patch diffs will only ever show a single line added/removed which will greatly simplify review work. Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-11-06 13:20:06 +00:00
-usb \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/var/lib/libvirt/images/f14.img,format=qcow2,if=none,\
id=drive-virtio-disk0,discard=unmap \
tests: split long lines Long lines are harder to read and harder to diff; in fact, if lines get too long (> 1000 bytes), it starts causing issues where git send-email refuses to send patches for the file. I've cleaned up the tests directory in the past (see commits bd6c46f, 3b750d1), but new long lines have been introduced in the meantime. Why 90 instead of 80? Because there were too many tests on the fringe edge, and I didn't want to edit that many files. Add a syntax check to prevent future long lines. * cfg.mk (sc_prohibit_long_lines): New rule. * tests/qemuxml2argvdata/qemuxml2argv-*.args: Split lines of any file with content longer than 90 columns. * tests/storagevolxml2argvdata/*.argv: Likewise. Signed-off-by: Eric Blake <eblake@redhat.com>
2013-07-17 17:47:01 +00:00
-device virtio-blk-pci,bus=pci.0,addr=0x4,drive=drive-virtio-disk0,\
qemu: capabilities: Always assume QEMU_CAPS_BOOTINDEX The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported qemu versions now use it. There's a LOT of test fallout as we did not use capabilities close enough to upstream for many of our tests. Several tests had a 'bootindex' variant. Since they'd become redundant they are also removed here. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-09 11:26:17 +00:00
id=virtio-disk0,bootindex=2 \
qemu: Specify format= iff disk source is not empty Just recently, qemu forbade specifying format for sourceless disks (qemu commit 39c4ae941ed992a3bb5). It kind of makes sense. If there's no file to open, why specify its format. Anyway, I have a domain like this: <disk type='file' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hda' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> and obviously I am unable to start it. Therefore, a fix on our side is needed too. Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-12-28 14:13:52 +00:00
-drive file=/var/lib/libvirt/Fedora-14-x86_64-Live-KDE.iso,format=raw,if=none,\
qemu: caps: Always assume presence of 'ide-hd' and 'ide-cd' devices The split of ide-disk into the two separate devices was introduced by qemu commit 1f56e32a7f4b3 released in qemu v0.15. Note that when compared to the previous commit which made sure that no disk related tests were touched, in this case it's not as careful. Signed-off-by: Peter Krempa <pkrempa@redhat.com>
2019-01-28 13:44:57 +00:00
id=drive-ide0-1-0,readonly=on,discard=ignore \
-device ide-cd,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0,bootindex=1 \
qemu: Support discard for disk QEMU introduced "discard" option for drive since commit a9384aff53, <...> @var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap}) requests are ignored or passed to the filesystem. Some machine types may not support discard requests. </...> This patch exposes the support in libvirt. QEMU supported "discard" for "-drive" since v1.5.0-rc0: % git tag --contains a9384aff53 contains v1.5.0-rc0 v1.5.0-rc1 So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
2013-05-14 12:44:54 +00:00
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3
Reference in New Issue Copy Permalink