External/libvirt
1
0
Fork 0
mirror of https://gitlab.com/libvirt/libvirt.git synced 2024-12-25 23:25:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
1b1b045915
libvirt/tests/qemuxml2argvdata/qemuxml2argv-virtio-lun.xml

53 lines
1.7 KiB
XML
Raw Normal View History

qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
<domain type='qemu'>
<name>test</name>
<uuid>bba65c0e-c049-934f-b6aa-4e2c0582acdf</uuid>
xml: output memory unit for clarity Make it obvious to 'dumpxml' readers what unit we are using, since our default of KiB for memory (1024) differs from qemu's default of MiB; and differs from our use of bytes for storage. Tests were updated via: $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/" $ find tests/*data tests/*out -name '*.xml' | \ xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/" followed by a few fixes for the stragglers. Note that with this patch, the RNG for <memory> still forbids validation of anything except unit='KiB', since the code silently ignores the attribute; a later patch will expand <memory> to allow scaled input in the code and update the RNG to match. * docs/schemas/basictypes.rng (unit): Add 'bytes'. (scaledInteger): New define. * docs/schemas/storagevol.rng (sizing): Use it. * docs/schemas/storagepool.rng (sizing): Likewise. * docs/schemas/domaincommon.rng (memoryKBElement): New define; use for memory elements. * src/conf/storage_conf.c (virStoragePoolDefFormat) (virStorageVolDefFormat): Likewise. * src/conf/domain_conf.h (_virDomainDef): Document unit used internally. * src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef): Likewise. * tests/*data/*.xml: Update all tests. * tests/*out/*.xml: Likewise. * tests/define-dev-segfault: Likewise. * tests/openvzutilstest.c (testReadNetworkConf): Likewise. * tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-02-23 00:48:38 +00:00
<memory unit='KiB'>1048576</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
numad: Always output 'placement' of <vcpu> <vcpu> is not an optional node. The value for its 'placement' actually always defaults to 'static' in the underlying codes. (Even no 'cpuset' and 'placement' is specified, the domain process will be pinned to all the available pCPUs).
2012-05-08 16:04:36 +00:00
<vcpu placement='static'>1</vcpu>
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
<os>
<type arch='x86_64' machine='pc-0.13'>hvm</type>
<boot dev='cdrom'/>
<boot dev='hd'/>
<bootmenu enable='yes'/>
</os>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
tests: unify qemu binary paths for all qemu related tests Our test data used a lot of different qemu binary paths and some of them were based on downstream systems. Note that there is one file where I had to add "accel=kvm" because the qemuargv2xml code parses "/usr/bin/kvm" as virt type="kvm". Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-04-06 16:19:48 +00:00
<emulator>/usr/bin/qemu-system-x86_64</emulator>
conf: add rawio attribute to disk element of domain XML This patch adds a new attribute "rawio" to the "disk" element of domain XML. Valid values of "rawio" attribute are "yes" and "no". rawio='yes' indicates the disk is desirous of CAP_SYS_RAWIO. If you specify the following XML: <disk type='block' device='lun' rawio='yes'> ... </disk> the domain will be granted CAP_SYS_RAWIO. (of course, the domain have to be executed with root privilege) NOTE: - "rawio" attribute is only valid when device='lun' - At the moment, any other disks you won't use rawio can use rawio. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2012-01-31 04:49:00 +00:00
<disk type='block' device='lun' rawio='yes'>
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
<driver name='qemu' type='qcow2'/>
<source dev='/dev/sdfake'/>
<target dev='vda' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</disk>
conf: add rawio attribute to disk element of domain XML This patch adds a new attribute "rawio" to the "disk" element of domain XML. Valid values of "rawio" attribute are "yes" and "no". rawio='yes' indicates the disk is desirous of CAP_SYS_RAWIO. If you specify the following XML: <disk type='block' device='lun' rawio='yes'> ... </disk> the domain will be granted CAP_SYS_RAWIO. (of course, the domain have to be executed with root privilege) NOTE: - "rawio" attribute is only valid when device='lun' - At the moment, any other disks you won't use rawio can use rawio. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2012-01-31 04:49:00 +00:00
<disk type='block' device='lun'>
<driver name='qemu' type='qcow2'/>
<source dev='/dev/sdfake2'/>
<target dev='vdb' bus='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
</disk>
domain: add implicit USB controller Some tools, such as virt-manager, prefers having the default USB controller explicit in the XML document. This patch makes sure there is one. With this patch, it is now possible to switch from USB1 to USB2 from the release 0.9.1 of virt-manager. Fix tests to pass with this change.
2012-02-08 00:48:25 +00:00
<controller type='usb' index='0'/>
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
<controller type='virtio-serial' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</controller>
<controller type='ide' index='0'/>
qemu: auto-add pci-root controller for pc machine types <controller type='pci' index='0' model='pci-root'/> is auto-added to pc* machine types. Without this controller PCI bus 0 is not available and no PCI addresses are assigned by default. Since older libvirt supported PCI bus 0 even without this controller, it is removed from the XML when migrating.
2013-04-22 12:16:13 +00:00
<controller type='pci' index='0' model='pci-root'/>
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
<interface type='user'>
<mac address='52:54:00:e5:48:58'/>
<model type='virtio'/>
<driver name='vhost' event_idx='off'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
device: cleanup input device code The current code was a little bit odd. At first we've removed all possible implicit input devices from domain definition to add them later back if there was any graphics device defined while parsing XML description. That's not all, while formating domain definition to XML description we at first ignore any input devices with bus different to USB and VIRTIO and few lines later we add implicit input devices to XML. This seems to me as a lot of code for nothing. This patch may look to be more complicated than original approach, but this is a preferred way to modify/add driver specific stuff only in those drivers and not deal with them in common parsing/formating functions. The update is to add those implicit input devices into config XML to follow the real HW configuration visible by guest OS. There was also inconsistence between our behavior and QEMU's in the way, that in QEMU there is no way how to disable those implicit input devices for x86 architecture and they are available always, even without graphics device. This applies also to XEN hypervisor. VZ driver already does its part by putting correct implicit devices into live XML. Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-01-11 11:40:32 +00:00
<input type='mouse' bus='ps2'/>
<input type='keyboard' bus='ps2'/>
qemu: add new disk device='lun' for bus='virtio' & type='block' In the past, generic SCSI commands issued from a guest to a virtio disk were always passed through to the underlying disk by qemu, and the kernel would also pass them on. As a result of CVE-2011-4127 (see: http://seclists.org/oss-sec/2011/q4/536), qemu now honors its scsi=on|off device option for virtio-blk-pci (which enables/disables passthrough of generic SCSI commands), and the kernel will only allow the commands for physical devices (not for partitions or logical volumes). The default behavior of qemu is still to allow sending generic SCSI commands to physical disks that are presented to a guest as virtio-blk-pci devices, but libvirt prefers to disable those commands in the standard virtio block devices, enabling it only when specifically requested (hopefully indicating that the requester understands what they're asking for). For this purpose, a new libvirt disk device type (device='lun') has been created. device='lun' is identical to the default device='disk', except that: 1) It is only allowed if bus='virtio', type='block', and the qemu version is "new enough" to support it ("new enough" == qemu 0.11 or better), otherwise the domain will fail to start and a CONFIG_UNSUPPORTED error will be logged). 2) The option "scsi=on" will be added to the -device arg to allow SG_IO commands (if device !='lun', "scsi=off" will be added to the -device arg so that SG_IO commands are specifically forbidden). Guests which continue to use disk device='disk' (the default) will no longer be able to use SG_IO commands on the disk; those that have their disk device changed to device='lun' will still be able to use SG_IO commands. *docs/formatdomain.html.in - document the new device attribute value. *docs/schemas/domaincommon.rng - allow it in the RNG *tests/* - update the args of several existing tests to add scsi=off, and add one new test that will test scsi=on. *src/conf/domain_conf.c - update domain XML parser and formatter *src/qemu/qemu_(command|driver|hotplug).c - treat VIR_DOMAIN_DISK_DEVICE_LUN *almost* identically to VIR_DOMAIN_DISK_DEVICE_DISK, except as indicated above. Note that no support for this new device value was added to any hypervisor drivers other than qemu, because it's unclear what it might mean (if anything) to those drivers.
2012-01-05 03:48:38 +00:00
<memballoon model='virtio'/>
</devices>
</domain>
Reference in New Issue Copy Permalink